| 全腰椎非线性有限元模型的建立与有效性验证 |
| |
| 引用本文： | 凌钦杰,林晖,谢普生,邓羽平,黄文华. 全腰椎非线性有限元模型的建立与有效性验证[J]. 中国临床解剖学杂志, 2018, 36(6): 662-667. DOI: 10.13418/j.issn.1001-165x.2018.06.013 |
| |
| 作者姓名： | 凌钦杰 林晖 谢普生 邓羽平 黄文华 |
| |
| 作者单位： | 1.广州医科大学附属第一医院脊柱外科， 广州 510120； 2.南方医科大学基础医学院，
广东省医学生物力学重点实验室， 广州 510515 |
| |
| 基金项目： | 广东省科技计划项目（2016B090917001, 2016B0909 25001, 2016B090913004, 2017B090912006），广州市医药卫生科技项目（20171A010300） |
| |
| 摘 要： | 目的 为人体腰椎生物力学有限元分析建立有效的全腰椎非线性数字仿真模型。 方法 采集一名25岁的健康男性腰椎（L1~5）CT影像数据，依次通过Mimics 17.0、Geomagic Studio 2013、UG8.5、Hypermesh 13.0、Abaqus6.14-4五个软件建立模型，赋予各组织对应的属性。首先进行网格收敛性测试，选取合适的网格划分方案以提高分析效率。然后通过给模型施加不同的力矩载荷来模拟腰椎的6种运动（前屈、后伸、左侧弯、右侧弯、左轴向旋转、右轴向旋转），计算腰椎各功能节段（functional spinal unit，FSU）的活动度（range of motion，ROM）。 结果 模型得出的结果与体外试验的数据类似，两者变化趋势规律一致。 结论 本研究使用的全腰椎非线性有限元模型的建立与验证方法可用于未来脊柱相关疾病的建模与分析。
|
| 关 键 词： | 腰椎 生物力学 有限元分析 非线性 |
| 收稿时间： | 2017-12-31 |
Development and validation of nonlinear finite element model of the whole lumbar spine |
| |
| LING Qin-jie,LIN Hu,XIE Pu-sheng,DENG Yu-ping,HUANG Wen-hua. Development and validation of nonlinear finite element model of the whole lumbar spine[J]. Chinese Journal of Clinical Anatomy, 2018, 36(6): 662-667. DOI: 10.13418/j.issn.1001-165x.2018.06.013 |
| |
| Authors: | LING Qin-jie LIN Hu XIE Pu-sheng DENG Yu-ping HUANG Wen-hua |
| |
| Affiliation: | 1. Spinal Surgery, The First Affiliated Hospital of Guangzhou Medical University, Guangzhou 510515, China;2. School of Basic Medical Sciences, Southern Medical University, Guangdong Provincial Key Laboratory of Medical Biomechanics, Guangzhou 510515, China |
| |
| Abstract: | Objective To develop the whole lumbar spine finite element model and to validate the model by comparison with the previous vitro experiments. results. Methods The CT images of the whole lumbar spine were from a 25 years old male volunteer. The finite element model was established by six software: Mimics 17.0, Geomagic Studio 2013, UG8.5, Hypermesh 13.0 and Abaqus 6.14-4. After finishing a grid convergence test, six lumbar movements (flexion, extension, left bending, right bending, left axial rotation, right axial rotation) were simulated by applying different moment loads to the model. Then the range of motion (ROM) of each lumbar spine functional spinal unit (FSU) was recorded. Results The simulating results obtained by the model were similar to those obtained from the in-vitro experiments, and the trend of the two was consistent. Conclusions The establishment and validation of the nonlinear finite element model of the whole lumbar spine used in this study can be used to model and analyze future spine-related diseases. |
| |
| Keywords: | Lumbar spine Biomechanics Finite element analysis Nonlinear Model |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国临床解剖学杂志》浏览原始摘要信息 |
|
点击此处可从《中国临床解剖学杂志》下载全文 |
|
