血塞通滴丸成型工艺的研究

目的:研究血塞通滴丸的最佳成型工艺。方法:以成型率及重量合格率作为评价指标,对不同基质与主药的用量比进行平行试验,对滴头及冷凝液的温度、贮药槽药液高度、滴距等4个因素进行正交试验。结果:基质与主药用量比为2.5∶1。最佳成型工艺为贮药槽高度3cm、滴头温度90℃、滴距5cm、冷凝液温度12.5℃。结论:以筛选出的成型工艺条件制成的滴丸,成品得率高,符合《中国药典》中滴丸剂的质量标准。

Study on Formation Technics of Xuesaitong Drop Pills

OBJECTIVE:To study the optimum formation technics of Xuesaitong drop pill.METHODS:Parallel tests were conducted on the dosage of different base materials and the main drug with the forming percentage and the rate of qualified weight as the index of evaluation,the orthogonal test was conducted on the4factors,including the temperature of drops and the liquor condensate,the drug height in the drug storage tank and the dropping distance.RESULTS:The ratio of base materials and the main drug was2.5∶1.The optimum forming technics could be seen as follows,the height of the drug storage tank was3cm,the temperature of drops was90℃,the dropping distance was5cm and the temperature of the liquor condensate was12.5℃.CONCLUSION:There was a high rate of end product of dropping pill prepared with this optimum process,which was in conformity with the standard stated in the Chinese Pharmacopoeia.