| 控制室结构抗爆布置方案比较与优化 |
| |
| 引用本文： | 周世光.控制室结构抗爆布置方案比较与优化[J].医药工程设计,2014(1):11-15. |
| |
| 作者姓名： | 周世光 |
| |
| 作者单位： | 同济大学,上海200092 |
| |
| 摘 要： | 用ANSYS/Ls-dyna模拟、分析化工医药行业控制室抗爆墙的落地方案与架空方案。研究爆源高度与架空高度对抗爆结构周边超压的影响,尤其是对架空方案底板超压的影响。给出方案的比较结果,总结结构受爆源高度等相关参数的影响情况,并对工程设计提出优化方法和建议。
|
| 关 键 词： | 抗爆 结构布置 数值模拟 |
Comparison and Optimum of Blast Resistance Scheme for Layout of Control Building |
| |
| Zhou Shiguang.Comparison and Optimum of Blast Resistance Scheme for Layout of Control Building[J].Pharmaceutical Engineering Design,2014(1):11-15. |
| |
| Authors: | Zhou Shiguang |
| |
| Institution: | Zhou Shiguang ( Tongji University, Shanghai, 200092 ) |
| |
| Abstract: | By using ANSYS/Ls-dyna, the blast resistant schemes of control building in chemical ＆ pharmaceutical industries were simulated and analyzed. The pressure effects of explosive source height and elevating height to around blast resistant structures were studied. Especially for the effect of elevating height to bottom slab, several schemes were compared. The effects from explosive source height to around structures were summarized, and then optimum method and proposal were provided for engineering design. |
| |
| Keywords: | blast resistance structure layout numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
