| 石斛明目胶囊成型辅料的选择与工艺研究 |
| |
| 引用本文： | 周滢,谭澈,段恒.石斛明目胶囊成型辅料的选择与工艺研究[J].中华中医药杂志,2011(2):367-368. |
| |
| 作者姓名： | 周滢 谭澈 段恒 |
| |
| 作者单位： | 重庆医科大学; |
| |
| 基金项目： | 贵州省科技攻关项目[黔科合农社字(2005)5005]~~ |
| |
| 摘 要： | 目的:优选石斛明目胶囊的最佳辅料与制剂成型工艺。方法:通过测定不同辅料配比生产的样品和选定的最佳辅料制成的颗拉的吸湿率和休止角比较,确定生产工艺参数。结果:用微晶纤维素作辅料制成颗粒的成型率为97.8%。结论:该研究为工业生产提供了参考依据。
|
| 关 键 词： | 胶囊 成型工艺 休止角 吸湿率 |
Study on formation technologies and selection of combined excipients of Shihu Securing Capsules |
| |
| ZHOU Ying,TAN Che,DUAN Heng.Study on formation technologies and selection of combined excipients of Shihu Securing Capsules[J].China Journal of Traditional Chinese Medicine and Pharmacy,2011(2):367-368. |
| |
| Authors: | ZHOU Ying TAN Che DUAN Heng |
| |
| Institution: | ZHOU Ying,TAN Che,DUAN Heng(Chongqing Medical University,Chongqing 400016,China) |
| |
| Abstract: | Objective: To optimize the best excipient and formation technologies of Shihu Securing Capsule.Methods: The produced samples made in different proportions were measured,the moisture absorption and angles of reposes of the granules made by the optimal excipients were compared,and the technological parameters were determined.Results: The molding rate of granules made by the excipient of MCC was 97.8%.Conclusion: The study provides the basis for the production of Shihu Securing Capsule. |
| |
| Keywords: | Capsules Formation technology Angle of reposes Moistrue absorption |
| 本文献已被 CNKI 等数据库收录！ |
