1. Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Key Laboratory of High Performance Polymer Materials and Technology, MOE, State Key Laboratory of Co‐ordination Chemistry, Nanjing University, Nanjing, P. R. China;2. Institute of Physics, University of Rostock, Rostock, Germany;3. School of Physical Science and Technology, Xinjiang Laboratory of Phase Transitions and Microstructures in Condensed Matters, Yili Normal University, Yining, P. R. China
Abstract:
The reorganization kinetics of the “original” lamellar diblock copolymer poly(ε‐caprolactone)‐block‐poly(4‐vinylpyridine) crystals formed at 260 K is studied in the melting region from 270 K (10 K below the onset of the melting peak of original crystals) to 310 K (the melting peak temperature) on the time scale starting from 10?4 to 102 s by ultrafast differential scanning calorimetry. Different reorganization pathways are observed in this temperature range. Annealing at temperatures below 295 K leads to further stabilization of original crystals by secondary crystallization. At annealing temperatures higher than 295 K, crystals partially melt and the reorganization occurs via the melting–recrystallization. For even higher temperature, such as 310 K, the melting is completed within a few milliseconds and recrystallization starts from the nuclei formation. The sigmoidal recrystallization kinetics is analyzed by the Avrami equation. It is found that the copolymer experiences about one order of magnitude slower recrystallization rate and has higher melting peak temperatures of crystals formed after recrystallization than the homopolymer. The slower recrystallization kinetics in the copolymer is discussed from the viewpoint of the nanoscale spatial constraint and the intermediate state prior to the recrystallization.
