In vivo high‐resolution magnetic resonance skin imaging at 1.5 T and 3 T |
| |
Authors: | Joëlle K. Barral Neal K. Bangerter Bob S. Hu Dwight G. Nishimura |
| |
Affiliation: | 1. Magnetic Resonance Systems Research Laboratory, Department of Electrical Engineering, Stanford University, Stanford, California, USA;2. Department of Electrical Engineering, Brigham Young University, Provo, Utah, USA;3. Palo Alto Medical Foundation, Palo Alto, California, USA |
| |
Abstract: | As a noninvasive modality, MR is attractive for in vivo skin imaging. Its unique soft tissue contrast makes it an ideal imaging modality to study the skin water content and to resolve the different skin layers. In this work, the challenges of in vivo high‐resolution skin imaging are addressed. Three 3D Cartesian sequences are customized to achieve high‐resolution imaging and their respective performance is evaluated. The balanced steady‐state free precession (bSSFP) and gradient echo (GRE) sequences are fast but can be sensitive to off‐resonance artifacts. The fast large‐angle spin echo (FLASE) sequence provides a sharp depiction of the hypodermis structures but results in more specific absorption rate (SAR). The effect of increasing the field strength is assessed. As compared to 1.5 T, signal‐to‐noise ratio at 3 T slightly increases in the hypodermis and almost doubles in the dermis. The need for fat/water separation is acknowledged and a solution using an interleaved three‐point Dixon method and an iterative reconstruction is shown to be effective. The effects of motion are analyzed and two techniques to prevent motion and correct for it are evaluated. Images with 117 × 117 × 500 μm3 resolution are obtained in imaging times under 6 min. Magn Reson Med, 2010. © 2010 Wiley‐Liss, Inc. |
| |
Keywords: | skin imaging microscopy FLASE high‐resolution MR imaging motion correction fat‐water separation |
|
|