Accuracy of complete dental arch impressions and stone casts using a three-dimensional measurement system. Effects on accuracy of rubber impression materials and trays

The purpose of this study was to investigate and compare the accuracy of complete dental arch impressions and stone casts made with two kinds of impression materials (addition-type silicone and polysulfide rubber) and trays (custom tray and modified custom tray). In addition, the effect of the quantity of stone was examined. Impressions were made from a metallic model of a simplified maxillary dentition. Impressions and stone casts were measured respectively with a three-dimensional measuring microscope. The results were as follows: 1. Distortions of impressions were so small that the reproducibilities of impressions were superior three-dimensionally. These kinds of impressions and trays did not influence the accuracy of impressions. 2. The setting expansion of the stone in the impression occurred in the outward direction and was affected by the kinds of impressions and trays. 3. The arch widths and lengths of the stone casts tended to increase in number. 4. Stone casts made with addition-type silicone impression material and a custom tray were the most accurate because the combination of the impression material and tray effectively suppressed the setting expansion of stone. 5. The accuracy of stone casts could be improved by controlling the quantity of stone.