Oxygen reduction mechanism on corroded zinc

The mechanism of oxygen reduction on the as-polished and corroded zinc specimens has been studied using a rotating ring disc electrode (RRDE) system. On the as-polished surface, oxygen was reduced into two distinct steps. In the first step, about 44% of O₂ was reduced to H₂O₂ in a 2-electron reaction with the rest being reduced to OH^? in a 4-electron reaction. On the other hand, in the second step, with the increase of overpotential O₂ was almost exclusively reduced to OH^? in a 4-electron reaction. The first step reduction occurred on an air-formed oxide-covered surface at more positive potential than ?1.2 V vs. Ag/AgCl and the second step reduction (E < ?1.2 V) took place on a semi-uniformly active surface. On the corroded surface, the second step was not distinctly observed on the polarization curve, because reduction of the zinc corrosion products simultaneously took place around ?1.2 V. The O₂ reduction in the first step was inhibited by deposition of the corrosion products, though the ratio of amount of O₂ reduced to OH^? in a 4-electron reaction was larger than that on the as-polished surface. The mechanism of oxygen reduction is discussed on the basis of results obtained from the RRDE experiment.