首页 | 本学科首页   官方微博 | 高级检索  
     

枕下乙状窦后入路内听道后壁磨除的显微解剖
引用本文:尹志杰,金保哲,周文科. 枕下乙状窦后入路内听道后壁磨除的显微解剖[J]. 中华解剖与临床杂志, 2016, 21(5): 413-416. DOI: 10.3760/cma.j.issn.2095-7041.2016.05.006
作者姓名:尹志杰  金保哲  周文科
作者单位:453003河南省卫辉市, 新乡医学院第一附属医院神经外科
基金项目:河南省卫生科技创新型人才工程中青年科技创新人才项目(4162)
摘    要:目的 观测经枕下乙状窦后入路手术路径中,显微镜下磨除内听道后壁所涉及的重要解剖结构及相关解剖学参数,以指导术中安全磨除内听道后壁。方法 模拟枕下乙状窦后入路,对6具(12侧)国人湿性头颅标本显微镜下行磨除内听道后壁,以内听道内口后缘中点(P点)作为参照点,分别测量P点至弓状隐窝、后半规管、共脚、内听道底、前庭导水管外口、颈静脉孔的最短距离,对这些结构拍照记录,所得测量结果行统计学处理。结果 以内听道后壁作为参照平面,测得内听道干与后壁平面所呈夹角为47.3°±17.2°。以P点作为参照点,测得P点至弓状隐窝的最短距离(4.10±0.60)mm,P点至后半规管最短距离(7.39±0.44)mm,P点至共脚的最短距离(8.09±0.47)mm,P点至内听道底距离(9.08±0.59)mm,P点至前庭导水管外口(10.44±0.73)mm,P点至颈静脉孔最短距离(7.35±1.09)mm。结论 枕下乙状窦后入路磨除内听道后壁,其磨除长度不应超过7 mm,可减少半规管及共脚的损伤概率。熟悉磨除内听道后壁过程中容易损伤的结构,可避免损伤半规管、颈静脉球、前庭导水管外口及内淋巴囊等重要解剖结构。

关 键 词:内耳  内听道  神经瘤    枕下乙状窦后入路  内听道后壁  显微外科手术  解剖学  
收稿时间:2016-01-05

Microsurgical anatomy of drilling posterior wall of the internal acoustic meatus using the suboccipital retrosigmoid approach
Yin Zhijie,Jin Baozhe,Zhou Wenke.. Microsurgical anatomy of drilling posterior wall of the internal acoustic meatus using the suboccipital retrosigmoid approach[J]. Chinese Journal of Anatomy and Clinics, 2016, 21(5): 413-416. DOI: 10.3760/cma.j.issn.2095-7041.2016.05.006
Authors:Yin Zhijie  Jin Baozhe  Zhou Wenke.
Affiliation:Department of Neurosurgery, the First Affiliated Hospital of Xinxiang Medical University, Weihui 453003, China
Abstract:Objective To investigate anatomic characters and obtain microanatomic data for the application of the suboccipital approach drilling of the posterior wall of the internal acoustic meatus (IAM), in order to open the posterior meatal wall safely and fully.Methods Simulating the procedures of the suboccipital retrosigmoid approach, 12 sides of 6 cadaveric adult head specimens were dissected by using microsurgical anatomic skill, with the posterior meatal walls were drilled. Regard a point P as reference that located posterior to internal acoustic pore, the averaged minimum distances from P to the subarcuate fossae, the posterior semicircular canal, common crus, fundus of IAM, external aperture of vestibular, jugular foramen were measured with the vernier caliper, and then photos were taken.Results Using the posterior wall of IAM as reference plane, the angle between the stem and this plane was 47.3°±17.2°. The average minimum distance from P to the subarcuate fossae, the posterior semicircular canal, common crus, fundus of IAM, external aperture of vestibular, jugular foramen were(4.10±0.60)mm, (7.39±0.44)mm, (7.39±0.44)mm, (7.39±0.44)mm, (10.44±0.73)mm, and (7.35±1.09)mm, respectively.Conclusions To protect the posterior canal and common crus, the length of posterior meatal wall when stripping should be kept within 7 mm. Being familiar with the susceptible structures of the surgical anatomy, such as semicircular canal, external aperture of vestibular, jugular bulb, ect, those structures can be protected very well during microsurgery.
Keywords:Ear   inner   Internal auditory canal   Neuroma   acoustic   Suboccipital retrosigmoid approach   Microsurgery   Anatomy  
点击此处可从《中华解剖与临床杂志》浏览原始摘要信息
点击此处可从《中华解剖与临床杂志》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号