Nanofibrous poly(acrylonitrile-co-maleic acid) membranes functionalized with gelatin and chitosan for lipase immobilization

Nanofibrous membranes with an average diameter of 100 and 180 nm were fabricated from poly(acrylonitrile-co-maleic acid) (PANCMA) by the electrospinning process. These nanofibrous membranes contain reactive groups which can be used to covalently immobilize biomacromolecules. Two natural macromolecules, chitosan and gelatin, were tethered on these nanofibrous membranes to fabricate dual-layer biomimetic supports for enzyme immobilization in the presence of 1-ethyl-3-(dimethyl-aminopropyl) carbodiimide hydrochloride (EDC)/N-hydroxyl succinimide (NHS). Lipase from Candida rugosa was then immobilized on these dual-layer biomimetic supports using glutaraldehyde (GA), and on the nascent PANCMA fibrous membrane using EDC/NHS as coupling agent, respectively. The properties of the immobilized lipases were assayed. It was found that there is an increase of the activity retention of the immobilized lipase on the chitosan-modified nanofibrous membrane (45.6+/-1.8%) and on the gelatin-modified one (49.7+/-1.8%), compared to that on the nascent one (37.6+/-1.8%). The kinetic parameters of the free and immobilized lipases, K(m) and V(max), were also assayed. In comparison with the immobilized lipase on the nascent nanofibrous membrane, there is an increase of the V(max) value for the immobilized lipases on the chitosan- and gelatin-modified nanofibrous membranes. Results also indicate that the pH and thermal stabilities of lipases increase upon immobilization. The residual activities of the immobilized lipases are 55% on the chitosan-modified nanofibrous membrane and 60% on the gelatin-modified one, after 10 uses.