| Abstract: | A rapid reproducible method for the production of ulcers and reversible regenerative hyperplasia of the urinary bladder of rats is described. This method does not involve administration of a toxic chemical or retention of a foreign body. Ulceration was produced by means of applying a steel rod, 5 mm in diameter, frozen at -78 C, to the serosal surface of the bladder for 2 seconds, twice, with a 5-second interval between each application. Sequential histologic observations showed that ulcers were accompanied by necrosis of the entire thickness of the bladder at the site of freezing with extensive acute inflammation. Regenerative hyperplasia was evident at the edge of the ulcer by the second day, with greatest severity at 5 days when papillary and nodular hyperplasia were present. At 15 days the bladders were normal or had only minimal hyperplasia. The labeling index by autoradiography was highest in the mildly hyperplastic area near the ulcer at 2 days and remained relatively high through 5 days. The hyperplastic epithelium surrounding the ulcer observed by scanning electron microscopy had numerous degenerative cells on the surface, and small epithelial cells with numerous short, uniform microvilli on their luminal surface were also observed. The numerous short, uniform microvilli on their luminal surface were also observed. The microvilli had a symmetric luminal membrane, as observed on trasmission electron microscopy. More peripherally the cells had microridges only or microvilli and microridges on their luminal surface. Neither pleomorphic microvili nor a structured glycocalyx fuzz on microvilli was observed during the process of regenerative hyperplasia, distinguishing it from neoplastic bladder proliferations. |
