首页 | 本学科首页   官方微博 | 高级检索  
     

Ⅰ型甲状成形术相关参数在喉标本和CT测量中的比较研究
引用本文:丁国强,沈雁,郑春泉,沙炎,潘宇澄. Ⅰ型甲状成形术相关参数在喉标本和CT测量中的比较研究[J]. 中华耳鼻咽喉头颈外科杂志, 2005, 40(11): 855-858
作者姓名:丁国强  沈雁  郑春泉  沙炎  潘宇澄
作者单位:1. 200031,上海,复旦大学附属眼耳鼻喉科医院耳鼻咽喉科
2. 200031,上海,复旦大学附属眼耳鼻喉科医院放射科
摘    要:目的探讨Ⅰ型甲状成形术相关参数通过喉标本和螺旋CT两种不同方法测量结果是否存在差异。方法对50例喉全切除术患者的喉体标本术后立即进行测量(均为单侧),并与术前通过螺旋CT多平面重建技术所测喉体相关参数结果进行比较研究,观察两种测量结果的差异是否具有统计学意义。结果所设6个参数通过两种方法测量结果差异均无统计学意义(P值均>0.05)。应用螺旋CT和喉标本两种方法测量所设参数的结果(x±s)分别为:甲状切迹至下缘的长度为(20.7±1.7)mm和(20.6±1.7)mm;声带的长度为(17.3±1.8)mm和(17.3±1.8)mm;斜线的长度为(28.6±3.2)mm和(29.1±2.7)mm;假设水平线的长度为(26.2±2.0)mm和(26.2±2.0)mm;声带前端至假设水平线在喉内的垂直距离为(4.5±0.6)mm和(4.5±0.7)mm;声带突至假设水平线在喉内的垂直距离为(10.8±1.1)mm和(10.9±1.1)mm。填入楔形假体在喉体内前、后端的宽度分别以4~5mm和8~9mm为宜。结论通过螺旋CT的多平面重建技术对喉体进行测量是准确可信的,是Ⅰ型甲状成形术术前设计开窗和假体大小的理想方法,解决了术中设计假体大小的滞后性。

关 键 词:耳鼻喉外科手术 声带麻痹 体层摄影术  X线计算机 解剖
收稿时间:2005-02-28
修稿时间:2005-02-28

Comparative study of the parameters related to type Ⅰ thyroplasty measured by laryngeal specimens and computed tomography
DING Guo-qiang,SHEN Yan,ZHENG Chun-quan,SHA Yan,PAN Yu-cheng. Comparative study of the parameters related to type Ⅰ thyroplasty measured by laryngeal specimens and computed tomography[J]. Chinese journal of otorhinolaryngology head and neck surgery, 2005, 40(11): 855-858
Authors:DING Guo-qiang  SHEN Yan  ZHENG Chun-quan  SHA Yan  PAN Yu-cheng
Affiliation:Department of Otorhinolaryngology, Affiliated Eye and Ear Nose Throat Hospital of FuDan University, Shanghai 200031, China.
Abstract:OBJECTIVE: To determine the consistence of the parameters related to type I thyroplasty measured by laryngeal specimens and CT scan. METHODS: The related parameters of 50 laryngeal specimens (unilateral) obtained following total laryngectomy were measured postoperative immediately, and compared with those measured by spiral CT scan with multiple plain reconstructive (MPR) technique preoperatively. Comparative results were analyzed to evaluate the statistical significance between these two methods. RESULTS: There were no significant statistical differences among the 6 parameters between two methods (P > 0.05), and the results (x +/- s) measured by CT scan and laryngeal specimens showed that the length of the thyroid notch to the inferior thyroid border were (20.7 +/- 1.7) mm and (20.6 +/- 1.7) mm; the length of the vocal cord were (17.3 +/- 1.8) mm and (17.3 +/- 1.8) mm; the length of the oblique line were (28.6 +/- 3.2) mm and (29.1 +/- 2.7) mm; the length of the presumptive horizontal line were (26.2 +/- 2.0) mm and (26.2 +/- 2.0) mm; the endolaryngeal vertical length of the anterior of the vocal cord to the presumptive horizontal line were (4.5 +/- 0.6) mm and (4.5 +/- 0.7) mm; the endolaryngeal vertical length of the vocal process to the presumptive horizontal line were (10.8 +/- 1.1) mm and (10.9 +/- 1.1) mm, respectively. As a result, the endolaryngeal anterior and posterior width of the wedge inserted in the thyroid cartilage were 4 - 5 mm and 8 - 9 mm respectively. CONCLUSIONS: MPR technique of spiral CT scan is able to design the size of the window and the prosthesis of type I thyroplasty preoperatively, which was testified to be a precise and reliable method to measure the larynx.
Keywords:Otorhinolaryngologie surgical procedures   Vocal cord paralysis   Tomography,X-ray computed   Dissection
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号