首页 | 本学科首页   官方微博 | 高级检索  
     


Correction: Tantalum(v) 1,3-propanediolate β-diketonate solution as a precursor to sol–gel derived,metal oxide thin films
Authors:Christopher Beale,Stefanie Hamacher,Alexey Yakushenko,Oumaima Bensaid,Sabine Willbold,Guillermo Beltramo,Sö  ren Mö  ller,Heinrich Hartmann,Elmar Neumann,Gregor Mussler,Alexander Shkurmanov,Dirk Mayer,Bernhard Wolfrum,Andreas Offenhä  usser
Abstract:
Correction for ‘Tantalum(v) 1,3-propanediolate β-diketonate solution as a precursor to sol–gel derived, metal oxide thin films’ by Christopher Beale et al., RSC Adv., 2020, 10, 13737–13748, DOI: 10.1039/D0RA02558E.

The authors regret that the plasma treatment and printing parameters were reported incorrectly in the subsection “Deposition on a-SiO2 for UV/Vis spectrophotometry” in the Experimental section of the original article.Before printing, the substrate for both samples was subjected to an argon plasma treatment for 5 minutes (150 W, 0.6 mbar). The plasma power is now corrected to be the same as stated in the “Deposition on a-SiO2 for Raman/XRD” subsection, where originally it was incorrectly stated that “the power was set slightly higher” for the Raman/XRD samples. For both the acetylacetone and benzoylacetone inks, the inks were printed on their respective substrates with a 75 μm drop pitch having dimensions of 400 × 220 drops to create a uniform layer.The correct section is as follows:
Keywords:
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号