首页 | 本学科首页   官方微博 | 高级检索  
检索        

钍钨电极生产过程中的放射性污染防控研究
引用本文:程芳,王蕾,吴志成.钍钨电极生产过程中的放射性污染防控研究[J].中国辐射卫生,2020,29(3):272-276.
作者姓名:程芳  王蕾  吴志成
作者单位:1. 淄博市环境污染防控中心,山东 淄博 255032;2. 山东省核与辐射安全监测中心;3. 山东海美侬项目咨询有限公司
摘    要:目的 分析钍钨电极生产过程中产生的放射性污染,确定生产场所和生产过程中的辐射污染水平,为生产全过程辐射环境管理,最大限度地减少放射性污染对工作人员和环境的影响提供依据。方法 首先对完整的钍钨电极生产工艺进行分析,然后以某典型钍钨电极生产企业为例,对其辐射工作场所进行了辐射污染环境检测,就辐射污染源项、放射性污染管理要点以及辐射污染防治措施等方面进行了分析。结果 各工作场所γ空气吸收剂量率的实测最大检测值为0.32 μGy /h。各工作台面的α表面污染水平最大检测值为17.75 Bq/cm2,β表面污染水平最大检测值为35.55 Bq/cm2。各岗位工作人员工作服及手套α表面污染水平最大值为0.38 Bq/cm2;β表面污染水平最大值为4.00 Bq/cm2结论 钍钨电极生产场所在落实辐射安全管理制度和辐射安全防护各项措施的情况下,对周围环境以及职业工作人员和公众人员产生的辐射污染是可控的。

关 键 词:钍钨电极  γ空气吸收剂量率  α表面污染  β表面污染  
收稿时间:2019-09-07

Research about prevention and control of radioactive contamination in the production of Thorium-Tungsten electrode
CHENG Fang,WANG Lei,WU Zhicheng.Research about prevention and control of radioactive contamination in the production of Thorium-Tungsten electrode[J].Chinese Journal of Radiological Health,2020,29(3):272-276.
Authors:CHENG Fang  WANG Lei  WU Zhicheng
Institution:1. Zibo Environmental Pollution Prevention and Control Center, Zibo 255030 China;2. Shandong Nuclear and Radiation Safety Monitoring Center;3. Shandong Haimeinong Project Consulting Co. Ltd.
Abstract:Objective To analyze the radioactive contamination in the process of Thorium-Tungsten electrode production, and to determine the level of radiation contamination in the production site and the production process, which provides a basis for the radiation environment management in the whole production process and the minimization of radioactive contamination damage to workers and the environment.Methods Firstly, the complete production process of Thorium-Tungsten electrode was analyzed. Then, a typical Thorium-Tungsten electrode manufacturer was taken as an example, the radiation pollution environment in its radiation workplace was detected. The radiation pollution sources, radioactive pollution management key points and radiation pollution prevention and control measures were analyzed.Results The maximum monitoring value of the air absorbed dose rate of gamma-ray in each workplace was 0.32 μGy/h. The maximum monitoring value of alpha surface contamination level on each work table was 17.75 Bq/cm2 and that of beta surface contamination level was 35.55 Bq/cm2. The maximum level of surface contamination for the working clothes and gloves of staff in each post was 0.38 Bq/cm2, and that of beta contamination level was 4.00 Bq/cm2.Conclusion The radiation pollution of Thorium-Tungsten electrode production site is controllable to the surrounding environment, professional staff and public personnel under the implementation of radiation safety management system and radiation safety protection measures.
Keywords:Thorium-Tungsten Electrode  Gamma Air Absorbed Dose Rate  Alpha Surface Contamination  Beta Surface Contamination  
本文献已被 CNKI 等数据库收录!
点击此处可从《中国辐射卫生》浏览原始摘要信息
点击此处可从《中国辐射卫生》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号