|
|||||
|
|
| 酒鬼乐颗粒中挥发油包合工艺研究 | |
| 引用本文： | 李红,蒋晓煌,蒋孟良,杨欣. 酒鬼乐颗粒中挥发油包合工艺研究[J]. 中国药业, 2012, 21(23): 22-23 |
| 作者姓名： | 李红 蒋晓煌 蒋孟良 杨欣 |
| 作者单位： | 1. 湖南中医药大学,湖南长沙,410208 2. 湖南中医药大学药学院,湖南长沙,410208 |
| 摘 要： | 目的优选β-环糊精包合酒鬼乐颗粒中挥发油的最佳工艺。方法采用L9（34）正交试验，以挥发油利用率、包合物收得率及包合物含油率为评价指标优选其最佳包合工艺。结果最佳包合工艺为A2B2C3，即挥发油与β-环糊精之比为1：6，包合温度45℃，包合时间1．5h。结论该工艺切实可行．重复性好，适合于工业化生产。 |
| 关 键 词： | 酒鬼乐颗粒 正交设计 挥发油 倍他环糊精 包合工艺 |
Study on Inclusion Technology for Volatile Oil on Jiuguile Keli |
|
| Li Hong , Jiang Xiaohuang , Jiang Mengliang , Yang Xin. Study on Inclusion Technology for Volatile Oil on Jiuguile Keli[J]. China Pharmaceuticals, 2012, 21(23): 22-23 | |
| Authors: | Li Hong Jiang Xiaohuang Jiang Mengliang Yang Xin |
| Affiliation: | 1.TCM University of Hunan,Changsha,China 410208;2.Graduate of TCM university of Hunan) |
| Abstract: | Objective To study optimum inclusion process conditions for volatile oil in Jiuguile Keli. Methods The L9（34） orthogonal test was used on optimizing the best process to the utilization ratio of volatile oil, the yield ratio and oil- bearing rate of inclusion compound as the evaluation index. Results The optimum preparation conditions for inclusion were established as oil： β- CD = 1：6,the inclusion temperature was 45℃, the inclusion time was 1.5 b. Conclusion This process is feasible, and repeatability, suitable for industrial production. |
| Keywords: | Jiuguile Keli orthogonal design volatile oil β - cyclodextrin inclusion process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |