Viscoelastic behavior and fracture toughness of six glass-ionomer cements

STATEMENT OF PROBLEM: Viscoelastic behavior can influence the fracture properties of glass ionomers, which is of clinical relevance. Glass-ionomer cements can display viscoelastic behavior, defined as having displacement rate- or strain rate-dependent mechanical properties. Understanding and describing the viscoelastic behavior of glass ionomers is important to understanding their clinical behavior. PURPOSE: The purpose of this study was to evaluate the viscoelastic behavior of 6 glass-ionomer cements and determine whether there was a correlation to fracture toughness. MATERIAL AND METHODS: Three conventional glass-ionomer cements (alpha-Silver, alpha-Fil, and Ketac-Molar) and 3 resin-modified glass-ionomer cements (Vitremer, Fuji II LC, and Photac-Fil Quick) were evaluated using measurements of compressive strength (CS), flexural strength (FS), and diametral tensile strength (DTS) at displacement rates of 0.5, 1.0, 1.5, and 2.0 mm/min. The CS and DTS specimens were cured in glass tubes and cut to 4 x 6-mm and 4 x 2-mm disk-shaped specimens, respectively. The FS specimens were cured in bar molds (2 x 2 x 15 mm). The fracture toughness (FT) specimens were cured in a minicompact mold to obtain precracked specimens. The mechanical testing results were compared statistically using generalized linear model/analysis of covariance and the Ryan-Einot-Gabriel-Welsch multiple range test at the alpha=.05 level. RESULTS: For all 3 mechanical properties, there was a displacement-rate dependence on the mechanical property. However, there were no differences in the displacement-rate dependence based on the type of material-conventional glass ionomer or resin-modified glass ionomer-for any of the mechanical properties. Only for FS test was there a significant difference based on the brand of material. There was no statistical difference in FT among the glass-ionomer cements tested, although the resin-modified glass ionomers tended to display higher FT. CONCLUSION: A larger sample size and a much wider range of crosshead speeds are necessary to support a correlation between viscoelastic behavior and FT.