| Abstract: | Chitosan membrane surface was modified by cornplexation and interpenetration of anionic polysaccharides - heparin and dextran sulfate - for improved blood compatibility in hemodialysis. Electron spectroscopy for chemical analysis results showed a characteristic sulfur (S) and sodium (Na) peaks after modification with dextran sulfate. The sulfur/carbon (S/C) atomic composition ratio increased from 0.03 to 0.08 when the bulk dextran sulfate concentration used for modification was increased from 2.5 to 10 mg ml-1 . The permeability of urea and creatinine did not change significantly upon modification with heparin or dextran sulfate. Surface modification, however, did decrease the permeability coefficients of glucose, vitamin B-2, and vitamin B-12. Unlike Cuprophan, chitosan and surface-modified chitosan membranes did not significantly activate the complement system as measured by the serum iC3b concentration. Compared to forty and sixty fully-activated platelets present on control surfaces, surface modification with heparin and dextran sulfate significantly reduced the number of adherent platelets per 25 000 μm2 area and the extent of platelet activation. Surface modification with anionic polysaccharides, however, did significantly shorten the plasma recalcification time leading to fibrin clot formation. The results of this study show that chitosan membrane surface can be modified by complexation-interpenetration of anionic modifying agents. The modified membranes do resist complement activation and platelet adhesion and activation. |
