基于PACS下颈椎椎管旁螺钉相关参数三维测量及可行性研究 |
| |
引用本文: | 谭必知,马骏雄,项良碧.基于PACS下颈椎椎管旁螺钉相关参数三维测量及可行性研究[J].骨科,2020,11(5). |
| |
作者姓名: | 谭必知 马骏雄 项良碧 |
| |
作者单位: | 中国人民解放军北部战区总医院,中国人民解放军北部战区总医院,中国人民解放军北部战区总医院 |
| |
基金项目: | 国家自然科学基金(81501079) |
| |
摘 要: | 目的:基于PACS(picture archiving and communication system,PACS)测量下颈椎椎管旁螺钉(paravertebral foramen screw,PVFS)相关参数并探讨其临床可行性。方法:按时间先后选取2016年12月~2017年12月因颈椎退变或外伤于中国人民解放军北部战区总医院行颈椎手术患者100例,收集术前上传至PACS的颈椎三维CT数据,分别测量C3-C6侧块螺钉(lateral mass screw,LMS)和PVFS钉道长度并进行比较分析。结果:C3-6PVFS10°和15°误差范围内平均安全钉道长度分别为(12.54±1.16)mm、(11.76±1.11)mm,而LMS、有效LMS平均钉道长度分别为 (14.58±1.20)mm、(12.83±1.21)mm。虽然PVFS与LMS钉道长度相比有统计学差异(P<0.05),但与有效LMS钉道长度是相差不大的。结论:下颈椎PVFS安全钉道长度与有效LMS钉道长度相接近,且其置钉方法合理安全,从影像学研究角度而言,下颈椎PVFS能作为一种安全、可行的技术选择,具有临床可行性。
|
关 键 词: | 颈椎内固定 侧块螺钉 短椎弓根螺钉 椎管旁螺钉 影像学测量。 |
收稿时间: | 2019/6/20 0:00:00 |
修稿时间: | 2020/8/17 0:00:00 |
Three-dimensional Measurement of Relevant Parameters and Feasibility Study of Paravertebral Foramen Screw in the Sub-axial Cervical Spine Based on the PACS. |
| |
Institution: | General Hospital of Northern Theater Command of PLA,General Hospital of Northern Theater Command of PLA,General Hospital of Northern Theater Command of PLA |
| |
Abstract: | |
| |
Keywords: | cervical internal fixation lateral mass screw short pedicle screw paravertebral foramen screw imaging measurement |
|
| 点击此处可从《骨科》浏览原始摘要信息 |
| 点击此处可从《骨科》下载免费的PDF全文 |