Shear Rate Dependence of Ultrasound Backscattering from Blood Samples Characterized by Different Levels of Erythrocyte Aggregation

The objectives were (1) to determine the effect of the erythrocyte aggregation level (wide range of aggregation) and shear rate (which also affects aggregation) on the ultrasound backscattered power, and (2) to evaluate the reproducibility of the ultrasound method. Experiments were performed under steady flow (100–1250 ml/min) in a 12.7 mm diameter vertical tube. Doppler ultrasound at 10 MHz was used to measure simultaneously the velocity and the backscattered power across the tube. For each radial position, the shear rate was computed from the derivative of the velocity profile. The backscattered power decayed exponentially as a function of the shear rate, and for a given shear rate, the power increased monotonically with the level of aggregation measured by laser reflectometry. Using blood samples simulating hypo-, normal, and hyperaggregating erythrocytes, the power of the ultrasound signal varied respectively by –7.8, –13.2, and –16.1 dB as a function of the shear rate (from 0.4 to 50 s^–1). The reproducibility of the backscattered power was 5.5 dB, which is less than the variations observed as a function of the shear rate. In conclusion, ultrasound backscattering is sensitive to the level of erythrocyte aggregation. At a first glance, ultrasound seems less accurate when compared to laser reflectometry but it is suggested that this is because ultrasound backscattering may be sensitive to structural aggregate changes that are not detected by the laser method. © 2000 Biomedical Engineering Society.PAC00: 8718-h, 8719Tt, 8750Kk