| 合金胶体点式电蚀剂配方筛选及粘结强度比较 |
| |
| 引用本文： | 孟维艳,周延民,张理生,于波.合金胶体点式电蚀剂配方筛选及粘结强度比较[J].现代口腔医学杂志,2000,14(3):179-181. |
| |
| 作者姓名： | 孟维艳 周延民 张理生 于波 |
| |
| 作者单位： | 1. 长春,白求恩医科大学口腔医学院,130041
2. 长春中医院 |
| |
| 基金项目： | 吉林省科委资助项目! (编号 93342 5 -1) |
| |
| 摘 要： | 目的 为提高口腔内常用合金与粘结材料的粘结强度，研究了胶体电解蚀刻剂并优选了不同合金点式电蚀剂的配方。方法 采用正交设计优选各金属点式电蚀剂的最佳配方，进行点式电解蚀刻，比较其剪切粘结强度，同时对点式电解蚀刻后和抗剪强度测试后的金属表面进行扫描电镜观察。结果 四种合金剪切强度以Ni-Cr合金及18-8不锈钢最高，Cu合金最低。扫描电镜观察均显示出凹凸不平微孔的立体结构，剪切后的合金表面微孔内，可见大量残留的复合树脂。结论 合金对点式电解蚀刻很敏感，可获得较高的粘结强度，胶体电解液可用于口腔内操作．
|
| 关 键 词： | 合金胶体点式电蚀剂 粘结强度 粘结材料 胶体电解液 口腔手术 胶体电解液 |
| 修稿时间： | 1999-01-12 |
The screening of formula of alloy-colloid spot-electrolytic-etching agent and the comparison of bond strength |
| |
| MENG Weiyan,ZHOU Yanmin,ZHANG Lisheng,et al..The screening of formula of alloy-colloid spot-electrolytic-etching agent and the comparison of bond strength[J].Journal of Modern Stomatology,2000,14(3):179-181. |
| |
| Authors: | MENG Weiyan ZHOU Yanmin ZHANG Lisheng |
| |
| Institution: | MENG Weiyan,ZHOU Yanmin,ZHANG Lisheng,et al. School of Stomatology,Norman Bethune University of Medical Science,Changchun 130041 |
| |
| Abstract: | Objective The colloid electrolytic-etching agent and the electrolytic formala for different alloys were studied to improve the bond strength of resin and alloy.Methods The formulas were selected by orthogonal test.According to the selected formulas the alloys were treated in spot electrolytic etching and then the shear bond strengths were compared.The etched metal surfaces and the sheared metal surfaces were observed with SEM.Results The highest bond strength was Ni-Cr alloy,and the lowest was Cu-alloy.The SEM showed that there were a large number of micro aperture in the four etched alloy surfaces.Conclusion The alloys are sensitive to spot electrolytic etching and high bonding strength can be obtained.. |
| |
| Keywords: | Alloy Colloid electrolytic etching agent Spot eletrolytics Formula |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
