首页 | 本学科首页   官方微博 | 高级检索  
检索        

催化裂化汽油萃取-光化学脱硫的动力学模型
引用本文:王磊,沈本贤.催化裂化汽油萃取-光化学脱硫的动力学模型[J].医学教育探索,2005(6):718-721.
作者姓名:王磊  沈本贤
作者单位:华东理工大学化工学院,上海200237
摘    要:以在正辛烷中添加不同量和不同种类的硫化物为模拟体系,介绍了萃取一光化学脱除催化裂化(FCC)汽油中硫化物工艺,探究了该工艺的脱硫机理,并建立了脱硫动力学方程,其动力学方程为(-rA)=dcA/dt=0.4352cA-462.28, Ea=16.9kJ/mol, k0=1.19。并通过3种FCC汽油的萃取-光化学脱硫的实验数据对该动力学模型进行验证,结果表明:该动力学方程适用于1#FCC汽油和3#FCC汽油;对于2#FCC汽油,由于其烯烃含量比较高,对实验结果有一定的影响,因此,计算结果与实验数据存在一定的偏差。

关 键 词:光化学  脱硫机理  动力学模型
收稿时间:2004/12/8 0:00:00

Kinetic Model of Desulfurization of Fluid Catalytic Cracking Gasoline by Extraction and Photochemistry
WANG Lei,SHEN Ben-xian.Kinetic Model of Desulfurization of Fluid Catalytic Cracking Gasoline by Extraction and Photochemistry[J].Researches in Medical Education,2005(6):718-721.
Authors:WANG Lei  SHEN Ben-xian
Institution:School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China
Abstract:In the model system,the mechanism of desulfurization of fluid catalytic cracking gasoline by extraction and photochemistry was investigated, and kinetic equation is founded.The kinetics equation is: (-r_A)=-dc_Adt=0.435 2 c_A-462.28,Ea=16.9 kJ/mol,k_0=1.19.At the same time,the kinetic(equation) is validated by three types of FCC gasoline.The results indicate that the kinetic equation is adapted to the actual 1~# and 2~# FCC gasoline system.In the 2~# FCC gasoline,there is error between experiment and computation because of alkenes.
Keywords:photochemistry  desulphurization mechanism  kinetic model
点击此处可从《医学教育探索》浏览原始摘要信息
点击此处可从《医学教育探索》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号