|
|||||
|
|
| 不同固化方式对ZY一1硅橡胶与丙烯酸树脂粘结强度的影响 | |
| 引用本文： | 石勇,宋玮,李风兰,赵铱民. 不同固化方式对ZY一1硅橡胶与丙烯酸树脂粘结强度的影响[J]. 口腔医学研究, 2011, 27(7): 558-560 |
| 作者姓名： | 石勇 宋玮 李风兰 赵铱民 |
| 作者单位： | 1. 广东省口腔医院·南方医科大学附属口腔医院修复科,广东,广州,510280 2. 第四军医大学口腔医院 |
| 基金项目： | 国家自然科学基金资助项目(编号:30471908) |
| 摘 要： | 目的：探讨赝复硅橡胶固化方式的不同对丙烯酸树脂与硅橡胶粘接强度的影响。方法：将硅橡胶与已预1处理丙烯酸树脂材料分别在室温，升温，及微波3种不同情况下制成硅橡胶一偶联剂一丙烯酸树脂粘接试件，测试试件粘接强度。结果：3种固化方式下各组间硅橡胶与丙烯酸树脂的粘结强度没有统计学差异。不同功率微波对硅橡胶固化后与丙烯酸树脂粘结强度的影响也没有统计学差异。结论：临床制作需要丙烯酸树脂固定的硅橡胶赝复体时，可以通过不同的固化方式制作。微波固化可以作为一种新的方式应用于赝复体的制作。 |
| 关 键 词： | 弹性聚硅酮类 丙烯酸树脂类 抗剪切强度 |
Effect of Curing Ways on the Bonding of Silicone Elastomer to Acrylic Resin |
|
| SHI Yong,SONG Wei,LI Feng-lan,et al.. Effect of Curing Ways on the Bonding of Silicone Elastomer to Acrylic Resin[J]. Journal of Oral Science Research, 2011, 27(7): 558-560 | |
| Authors: | SHI Yong SONG Wei LI Feng-lan et al. |
| Affiliation: | SHI Yong,SONG Wei,LI Feng-lan,et al.Guangdong Provincial Stomatological Hospital,Department of Prosthodontics,Affiliated Hospital to Southern Medical University,Guangzhou 510280 |
| Abstract: | Objective:To evaluate the effects of curing ways on the bonding of silicone elastomer to acrylic resin.Methods:The curing ways included room temperature,heat temperature,and microwave.Shear bond strength were tested and failure modes were assessed for all specimens.Results:The results showed the curing ways had no effect on the shear bond strength of ZY-1 to acrylic resin.Different power of microwave curing of silicone elastomers to acrylic resin was also no significant different.Conclusion:The different cu... |
| Keywords: | Silicone elastomer Acrylic resins Shear strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |