| 加味四逆颗粒大孔树脂精制工艺研究 |
| |
| 引用本文： | 王丽娜,王魏,李云涛.加味四逆颗粒大孔树脂精制工艺研究[J].中国中医药信息杂志,2008,15(4):63-65. |
| |
| 作者姓名： | 王丽娜 王魏 李云涛 |
| |
| 作者单位： | 1. 黑龙江中医药大学博士后流动站,黑龙江,哈尔滨,150040
2. 黑龙江省华信药业有限公司,黑龙江,哈尔滨,150040 |
| |
| 摘 要： | 目的对加味四逆颗粒大孔树脂吸附精制的方法进行工艺考察，选取最佳工艺条件。方法采用正交试验设计，以柴胡皂苷A、芍药苷、橙皮苷、甘草酸4种成分为指标，采用HPLC法对上述指标成分进行含量测定。结果选用AB-8型大孔树脂，每克树脂的最大吸附量分别为柴胡皂苷A2．8mg、芍药苷62.8mg、橙皮苷49.6mg、甘草酸84.9mg，上样药液浓度为0.5g（原药材）／mL、树脂柱的径高比为1：7、吸附流速为2BV／h为最佳上样工艺。结论大孔树脂吸附法可用干加味四逆颗粒的精制。
|
| 关 键 词： | 加味四逆颗粒 大孔吸附树脂 制备工艺 |
| 文章编号： | 1005-5304(2008)04-0063-03 |
| 修稿时间： | 2007年7月9日 |
Study on Pureparation Techniques of Jiawei Sini Granules |
| |
| WANG Li-na,WANG Wei,LI Yun-tao.Study on Pureparation Techniques of Jiawei Sini Granules[J].Chinese Journal of Information on Traditional Chinese Medicine,2008,15(4):63-65. |
| |
| Authors: | WANG Li-na WANG Wei LI Yun-tao |
| |
| Institution: | WANG Li-na,WANG Wei,LI Yun-tao(1.Mobile Postdoctoral Center, Heilongjiang University of TCM, Harbin 150040, China; 2.Heilongjiang Province Hua Xin yao Industry Limited Company, Harbin 150040, China) |
| |
| Abstract: | Objective To optimize the conditions of Jiawei Sini granules by inspecting the macroporous resin adsorption refined methods. Methods Orthogonal design was used with saikosaponin A, paeoniflorin, hesperidin and glycyrrhizin as indicators determined by HPLC. Results The AB-8 macroporous resin, the biggest per gram of resin adsorption capacity were saikosaponin A 2.8 mg, paeoniflorin 62.8 mg, hesperidin 49.6 mg, glycyrrhizin 84.9 mg, with the concentration of durg 0.5 g/mL, the resin column diameter-height ratio of 1 ： 7 and adsorption velocity of 2 （BV/h）. Conclusion Macroporous resin adsorption method can be used for refining Jiawei Sini Granules. |
| |
| Keywords: | Jiawei Sini Granules macroporous adsorption resin |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
