| 火焰原子吸收法测定锌的正交试验 |
| |
| 引用本文： | 杨金玲,聂尚丹,公维磊,王长芹,张凯,胡晓林. 火焰原子吸收法测定锌的正交试验[J]. 济宁医学院学报, 2009, 32(5): 347-349 |
| |
| 作者姓名： | 杨金玲 聂尚丹 公维磊 王长芹 张凯 胡晓林 |
| |
| 作者单位： | 济宁医学院医学检验系,山东,济宁,272013;济宁医学院医学检验系,山东,济宁,272013;济宁医学院医学检验系,山东,济宁,272013;济宁医学院医学检验系,山东,济宁,272013;济宁医学院医学检验系,山东,济宁,272013;济宁医学院医学检验系,山东,济宁,272013 |
| |
| 摘 要： | 目的测试TAS-990原子吸收分光光度计测定锌的操作参数。方法在单因素试验的基础上,依据三因素四水平正义试验表L16（4^4）进行实验。结果测定锌的最佳工作条件为燃气流量1200ml／l、灯电流3．0mA、燃烧器高度7．0mm。结论燃气流量、灯电流和燃烧器高度为重要影响因素。
|
| 关 键 词： | 火焰原子吸收法 锌 正交试验 |
An orthogonal Test Study on Determination of Zinc by Flame Atomic Absorption Spectrometry |
| |
| Affiliation: | YANG Jin-ling ,NIE Shang-dan ,GONG Wei-lei ,et al (Medical Laboratory Department of Jining Medical University,Jining 272013 ,China) |
| |
| Abstract: | Objective To Monitor the operating parameters of Zinc by TAS-990 atomic absorption spectrophotometer. Methods On the basis of single factor experiment,experiments were done according to the orthogonal experiment table L16 （4^4 ）. Results The optimum working conditions of monitoring zice by Atom Absorption Spectrophotometer were as follows the gas flow 1200ml/min, Lamp current 2.0mA, Burner height 7.0mm respectively. Conclusion Gas flow ,Lamp current and Burner height can inpact on the determination results. |
| |
| Keywords: | Flame atomic absorption spectrophotometer Zinc Orthogonal test design |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
