超高效液相色谱-电喷雾串联质谱法测定塑料成品中的三甲基氯化锡

目的建立塑料成品中三甲基氯化锡(TMT)的超高效液相色谱-串联质谱联用测定法(UPLC-MS/MS)。方法塑料样品用乙酸乙酯提取,洗脱液在40℃水浴下氮气吹干;残渣用流动相溶解,旋涡混匀60s,过0.22μm微孔滤膜,经C18色谱柱完成分离,串联质谱仪上采用多反应监测正离子模式测定三甲基氯化锡,外标法定量。结果三甲基氯化锡在1.0~100.0μg/L范围内线性关系良好(相关系数r=0.999 7),检出限0.2μg/L。在2.0、10.0和50.0μg/L 3个添加水平范围的RSD小于8.0%,样品加标回收率为88.5%~93.4%。结论建立的超高效液相色谱-串联质谱联用法测定塑料成品中三甲基氯化锡的方法快速简单、准确有效。

Determination of trimethyltin in plastic product by using ultra high performance liquid chromatography electrospray ionization tandem mass spectrometry

Objective An ultra-high performance liquid chromatography eclectrospray ionization tandem mass spectrometry (UPLC-MS/MS) method was developed to determine trimethyltin (TMT) in plastic product. Methods TMT was extracted from plastic product by ethyl acetate, the elute was evaporated to dryness with nitrogen in 40℃ water bath, redissolved with 1ml of moble phase solution, vortexed for 60 s and filtered with 0.22 μm membrane. The filtrate was detected by UPLC-MS/MS in positive ion electrospray and MRM mode with a UPLC C18 column as separation column, and quantified with external standard substances. Results TMT was linear in the range of 1.0~100.0 μg/L with correlation coefficient of 0.9997. The relative standard derivations (RSD) at three levels (2.0 μg/L、10.0 μg/L and 50.0 μg/L) were lower than 8.0%, and the recovery rate was from 88.5% to 93.4%. Conclusion The method of liquid chromatography-electrospray tandem mass spectrometry is simple, reliable and accurate, that adapts to determinate TMT in plastic product.