首页 | 本学科首页   官方微博 | 高级检索  
     


Morphology and Thermal Properties of MCPA6/ABS by in situ Polymerization of ε‐Caprolactam
Authors:Lianlong Hou  Guisheng Yang
Abstract:Summary: In this work, blends of monomer casting polyamide 6 (MCPA6) and acrylonitrile‐butadiene‐styrene (ABS) were successfully prepared by in situ polymerization via the application of ε‐caprolactam as a reactive solvent. The morphology and thermal properties of MCPA6/ABS were investigated by means of wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM), respectively. The domain sizes of the ABS phase in MCPA6/ABS blends were much finer than those in corresponding polyamide 6 (PA6)/ABS blends prepared by simple melt blending. With an increased amount of ABS in MCPA6, the melt enthalpy (ΔHf), the rate of crystallization (Tc) and the degree of crystallinity (Xc(DSC)) of MCPA6 in MCPA6/ABS blends were all decreased. The degree of supercooling (ΔTd) showed a contrary trend. However, the melting temperatures of these blends were almost unchanged. All the results could be attributed to in situ polymerization and the hydrolysis reaction of ABS that occurred during the polymerization process. Furthermore, WAXD results showed that only α‐form crystals existed in the MCPA6/ABS blends, despite the ABS content and heat treatment.

SEM micrograph of the fractured surface of an MCPA6/ABS blend with an ABS content of 20 wt.‐% (×10 000).

Keywords:acrylonitrile‐butadiene‐styrene  hydrolysis  in situ polymerization  morphology  polyamide 6  thermal properties
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号