Correction to: Serum microRNA is a biomarker for post-operative monitoring in glioma

Journal of Neuro-Oncology - We performed a systematic review and meta-analysis of clinical outcomes for patients with acromegaly treated with stereotactic radiosurgery (SRS). Primary outcomes were...     

The Lumbar Ligamentum Flavum Does Not Have Two Layers and Is Confluent with the Interspinous Ligament: Anatomical Study with Application to Surgical and Interventional Pain Procedures

Numerous authors over the years have reported that the lumbar ligamentum flavum has two layers. Our routine cadaveric dissections raised the question whether this understanding is correct, as we always have observed only one layer. Thus, the goal of this cadaveric study was to reevaluate the layers of the ligamentum flavum. Twenty lumbar levels from five fresh-frozen cadaveric specimens were used in this study. After dissection of the lumbar spine, the ligamentum flavum and interspinous ligament were exposed. Each lumbar level was transected through the zygapophyseal joint, and hematoxylin and eosin staining, Masson's trichrome staining and Verhoeff-van Gieson staining were performed. Continuation of the interspinous ligament and ligamentum flavum were observed invariably. There was no evidence of the existence of a two-layered ligamentum flavum. The lumbar ligamentum flavum does not consist of two layers, but is confluent instead with the interspinous ligament that attaches to the zygapophyseal joints. To convey this anatomy better, we suggest describing the lumbar ligamentum flavum as a structure that consists of interlaminar and interspinous parts. Precise knowledge of the ligamentum flavum's anatomy can be of clinical value, particularly when epidural anesthesia or lumbar puncture are performed. Clin. Anat. 32:34–40, 2019. © 2019 Wiley Periodicals, Inc.     

Adolescents' self‐perceived and actual weight: Which plays a dominant role in weight loss behaviour in Lebanon?

Background

The decision to lose weight among adolescents is complex and is guided by a number of body‐related factors. This study examined the extent of agreement between actual weight, measured as body mass index, and self‐perceived weight and assessed their relative importance in weight loss behaviour among Lebanese adolescents.

Methods

Data on 278 adolescents aged 13–17 years were drawn from the nationwide Nutrition and Non‐Communicable Disease Risk Factor Survey (Lebanon, 2009). Binary multivariable logistic regressions were conducted to test associations with “effort to lose weight” as the outcome variable, controlling for a number of potential confounders.

Results

Close to 36% reported trying to lose weight. Around 21% and 13% were overweight and obese, respectively, and 40% and 10% perceived their weight as slightly high and very high, respectively. Inaccurate perceivers, those underestimating or overestimating their weight, constituted 39%, with overall percent agreement between actual and self‐perceived weight being 60.8% (kappa statistic = 0.319, 95% CI [0.242, 0.396]). About a third of the overweight adolescents (30.5%) and more than half of the obese (56.8%) underestimated their weight. In the multivariable analysis, self‐perceived weight was statistically significant and a stronger predictor of weight loss effort than body mass index (adjusted odds ratios = 14.42 and 6.42 for slightly high and very high perceived weight, respectively, compared to odds ratios = 1.47 and 2.31 for overweight and obese adolescents, respectively).

Conclusion

Health professionals need to consider self‐perceived weight in conjunction with actual weight in their pursuit of weight management goals and in planning prevention programmes that guide weight loss behaviours for adolescents.     

MRI compatible MS2 nanoparticles designed to cross the blood–brain-barrier: providing a path towards tinnitus treatment

Fundamental challenges of targeting specific brain regions for treatment using pharmacotherapeutic nanoparticle (NP) carriers include circumventing the blood–brain-barrier (BBB) and tracking delivery. Angiopep-2 (AP2) has been shown to facilitate the transport of large macromolecules and synthetic nanoparticles across the BBB. Thus, conjugation of AP2 to an MS2 bacteriophage based NP should also permit transport across the BBB. We have fabricated and tested a novel MS2 capsid-based NP conjugated to the ligand AP2. The reaction efficiency was determined to be over 70%, with up to two angiopep-2 conjugated per MS2 capsid protein. When linked with a porphyrin ring, manganese (Mn²⁺) remained stable within MS2 and was MRI detectable. Nanoparticles were introduced intracerebroventricularly or systemically. Systemic delivery yielded dose dependent, non-toxic accumulation of NPs in the midbrain. Design of a multifunctional MRI compatible NP platform provides a significant step forward for the diagnosis and treatment of intractable brain conditions, such as tinnitus.     

Constructing whole of population cohorts for health and social research using the New Zealand Integrated Data Infrastructure

Objectives: To construct and compare a 2013 New Zealand population derived from Statistics New Zealand’s Integrated Data Infrastructure (IDI) with the 2013 census population and a 2013 Health Service Utilisation population, and to ascertain the differences in cardiovascular disease prevalence estimates derived from the three cohorts. Methods: We constructed three national populations through multiple linked administrative data sources in the IDI and compared the three cohorts by age, gender, ethnicity, area‐level deprivation and District Health Board. We also estimated cardiovascular disease prevalence based on hospitalisations using each of the populations as denominators. Results: The IDI population was the largest and most informative cohort. The percentage differences between the IDI and the other two populations were largest for males and for those aged 15–34 years. The percentage differences between the IDI and Census cohorts were largest for people living in the most deprived areas. The ethnic distribution varied across the three cohorts. Using the IDI population as a reference, the Health Service Utilisation population generally overestimated cardiovascular disease prevalence, while the Census population generally underestimated it. Conclusions and implications: The New Zealand IDI population is the most comprehensive and appropriate national cohort for use in health and social research.     

Can specially trained community care workers effectively support patients and their families in the home setting at the end of life?

Surveys indicate that many Australians would prefer to die at home, but relatively few do. Recognising that patients and their families may not have the support they need to enable end‐of‐life care at home, a consortium of care providers developed, and received funding to trial, the Palliative Care Home Support Program (PCHSP) across seven health districts in New South Wales, Australia. The programme aimed to supplement end‐of‐life care in the home provided by existing multidisciplinary community palliative care teams, with specialist supportive community care workers (CCWs). An evaluation of the service was undertaken, focussing on the self‐reported impact of the service on family carers (FCs), with triangulation of findings from community palliative care teams and CCWs. Service evaluation data were obtained through postal surveys and/or qualitative interviews with FCs, community palliative care teams and CCWs. FCs also reported the experience of their loved one based on 10 items drawn from the Quality of Death and Dying Questionnaire (QODD). Thematic analysis of surveys and interviews found that the support provided by CCWs was valued by FCs for: enabling choice (i.e. to realise end‐of‐life care in the home); providing practical assistance (“hands‐on”); and for emotional support and reassurance. This was corroborated by community palliative care teams and CCWs. Responses by FCs on the QODD items indicated that in the last week of life, effective control of symptoms was occurring and quality of life was being maintained. This study suggests that satisfactory outcomes for patients and their families who wish to have end‐of‐life care in the home can be enabled with the additional support of specially trained CCWs. A notable benefit of the PCHSP model, which provided specific palliative care vocational training to an existing community care workforce, was a relatively rapid increase in the palliative care workforce across the state.     

Control of brushing variables for the in vitro assessment of toothpaste abrasivity using a novel laboratory model

OBJECTIVES: Design and construct a tooth-brushing simulator incorporating control of brushing variables including brushing force, speed and temperature, thereby facilitating greater understanding of their importance in toothpaste abrasion testing methodologies. METHODS: A thermostable orbital shaker was selected as a base unit and 16- and 24-specimen brushing rigs were constructed to fit inside, consisting of: a square bath partitioned horizontally to provide brushing channels, specimen holders for 25 mm diameter mounted specimens to fit the brushing channels and individually weighted brushing arms, able to support four toothbrush holders suspended over the brushing channels. Brush head holders consisted of individually weighted blocks of Delrin, or PTFE onto which toothbrush heads were fixed. Investigating effects of key design criteria involved measuring abrasion depths of polished human enamel and dentine. RESULTS: The brushing simulator demonstrated good reproducibility of abrasion on enamel and dentine across consecutive brushing procedures. Varying brushing parameters had a significant impact on wear results: increased brushing force demonstrated a trend towards increased wear, with increased reproducibility for greater abrasion levels, highlighting the importance of achieving sufficient wear to optimise accuracy; increasing brushing temperature demonstrated increased enamel abrasion for silica and calcium carbonate systems, which may be related to slurry viscosities and particle suspension; varying brushing speed showed a small effect on abrasion of enamel at lower brushing speed, which may indicate the importance of maintenance of the abrasive in suspension. CONCLUSIONS: Adjusting key brushing variables significantly affected wear behaviour. The brushing simulator design provides a valuable model system for in vitro assessment of toothpaste abrasivity and the influence of variables in a controlled manner. Control of these variables will allow more reproducible study of in vitro tooth wear processes.