An audit of root canal treatment performed by undergraduate students

AIM: The objective of this study was to audit the quality of root canal treatment performed by undergraduate students on adult patients. METHODOLOGY: All root canal treatment completed by first and second clinical year undergraduates over a 12-month period were included in the study. The availability and readability of pretreatment, diagnostic length, try-in point and postoperative radiographs were noted for each case. All readable postoperative radiographs of primary treatments were examined for quality of the root filling, categorized as complete, incomplete apical, incomplete apical and lateral or not assessable. The distance from the radiographic apex of the root to the apical extent of each root filling was measured to 0.1 mm precision. RESULTS: Undergraduates performed primary treatment on 157 teeth. A postoperative radiograph was available in 97% of cases. A try-in point radiograph was unavailable in one-fifth of cases. Twenty-seven teeth (13%) were categorized as satisfactory in terms of both radiographic quality and distance of the root filling from the radiographic apex. CONCLUSIONS: Overall, the technical quality of root canal treatment completed by undergraduate students was poor.     

Comparison of cold lateral condensation and a warm multiphase gutta-percha technique for obturating curved root canals

AIM: The aim of this project was to evaluate and compare the radiographic quality and sealability of root fillings in extracted human teeth using lateral condensation of gutta-percha or multiphase gutta-percha obturation (Alphaseal). METHODOLOGY: A total of 108 freshly extracted human, mature single-rooted teeth were divided into two identical groups of 54 teeth on the basis of root canal shape. The canals were prepared to a minimum 0.055 taper and enlarged to size 35 at the apex. All root canals were flushed with 17% EDTA solution and 2.5% NaOCl to remove the dentinal smear layer. The canals of one group were obturated using cold lateral condensation of gutta-percha and the canals of the other group were filled using a warm multiphase gutta-percha obturation technique. The extrusion of sealer and/or gutta-percha through the apex of the teeth was recorded using a simple yes/no scheme. The sealability of each technique was assessed by a dye penetration method. The radiographic quality of obturation was determined for each canal using a four-point scale. RESULTS: Root canals filled by multiphase obturation had significantly more extrusion of sealer (P < 0.001) and gutta-percha (P < 0.001) than canals filled by lateral condensation. Canals filled by multiphase gutta-percha obturation had significantly less apical dye leakage than those obturated by lateral condensation (P < 0.05). Lateral condensation achieved significantly better scores for radiographic quality than multiphase obturation from the bucco-lingual view (P < 0.01). CONCLUSIONS: Under laboratory conditions multiphase gutta-percha had better sealability but poorer radiographic quality than lateral condensation.     

Microleakage of Diaket and amalgam in root-end cavities prepared using MicroMega sonic retro-prep tips

The in vitro sealing ability of the root-canal sealer Diaket when used as a root-end filling material was compared with that of amalgam using linear microleakage of Indian ink. Eight groups of 20 extracted teeth each were formed, plus 12 control teeth as follows: 1) root-end resection of 45° bevel, root-end cavity preparation with an 008 round bur, amalgam root-end filling; 2) 45° bevel, bur, Diaket; 3) 45° bevel, using a sonic retro-prep tip, amalgam; 4) 45° bevel, sonic, Diaket; 5) no bevel, bur, amalgam; 6) no bevel, bur, Diaket; 7) no bevel, sonic, amalgam; 8) no bevel, sonic, Diaket. Root-end cavity depths of 3 mm were prepared. Specimens were immersed in Indian ink for 2 weeks. The teeth were demineralized, rendered transparent and linear dye penetration recorded. Results showed that Diaket provided a superior seal to amalgam irrespective of the root-end preparation. The degree of bevel of the resected root-end did not influence leakage. Sonic instrumentation resulted in a larger root-end cavity than with burs.     

The upper anterior sectional denture.

An upper anterior sectional denture is described which consists of (1) a cast cobalt-chromium framework with two passive clasps that contact undercuts on the distal surfaces of the most posterior remaining teeth and (2) a labial flange that carries the replaced tooth or teeth and engages the labiointerproximal gingival undercuts of the anterior teeth adjacent to the edentulous ridge. The cast framework is inserted occlusogingivally, and the labial flange is inserted labiolingually. Both sections are held together by the frictional resistance of the split post of the framework that fits into a tube on the labial flange and hollowed-out artificial tooth. With this type of prosthesis, certain clinical problems can be handled without abutment tooth preparation and with a minimal amount of chair time.     

Cleaning effectiveness of root canal irrigation with electrochemically activated anolyte and catholyte solutions: a pilot study

AIM: The aim of this study was to evaluate the potential of electrochemically activated (ECA) anolyte and catholyte solutions to clean root canals during conventional root canal preparation. METHODOLOGY: Twenty extracted single-rooted human mature permanent teeth were allocated randomly into four groups of five teeth. The pulp chambers were accessed and the canals prepared by hand with conventional stainless steel endodontic instruments using a double-flared technique. One or other of the following irrigants was used during preparation: distilled water, 3% NaOCl, anolyte neutral cathodic (ANC) (300 mg L-1 of active chlorine), and a combination of anolyte neutral cathodic (ANC) (300 mg L-1 of active chlorine) and catholyte. The teeth were split longitudinally and the canal walls examined for debris and smear layer by scanning electron microscopy. SEM photomicrographs were taken separately in the coronal, middle and apical parts of canal at magnification of x800 to evaluate the debridement of extracellular matrix and at a magnification of x2500 to evaluate the presence of smear layer. RESULTS: Irrigation with distilled water did not remove debris in the apical part of canals and left a continuous and firm smear layer overlying compressed low-mineralized predentine. All chemically active irrigants demonstrated improved cleaning potential compared to distilled water. The quality of loose debris elimination was similar for NaOCl and the anolyte ANC solution. The combination of anolyte ANC and catholyte resulted in improved cleaning, particularly in the apical third of canals. The evaluation of smear layer demonstrated that none of the irrigants were effective in its total removal; however, chemically active irrigants affected its surface and thickness. Compared to NaOCl, the ECA solutions left a thinner smear layer with a smoother and more even surface. NaOCl enhanced the opening of tubules predominantly in the coronal and middle thirds of canals, whereas combination of ANC and catholyte resulted in more numerous open dentine tubules throughout the whole length of canals. CONCLUSIONS: Irrigation with electrochemically activated solutions cleaned root canal walls and may be an alternative to NaOCl in conventional root canal treatment. Further investigation of ECA solutions for root canal irrigation is warranted.     

The distribution of plaque and gingivitis and the influence of toothbrushing hand in a group of South Wales 11–12 year-old children

Numerous factors may affect the distribution of plaque and gingivitis in any individuals mouth. Of considerable importance must be the oral hygiene habits of each person, which will be influenced by compliance and dexterity with tooth cleaning methods. The pattern of gingivitis seen at a young age may, with time, reflect the eventual distribution of attachment loss. This in part, could explain the considerable variation in chronic periodontal disease seen between individuals and at different sites within the same mouth. This study reports the baseline data for the distribution of plaque and gingivitis in 1105, 11-12-year-old children in South Wales. The children were selected by disproportionate stratified random sampling and examined by a multidisciplinary group with the long-term aim of evaluating the importance of malocclusion to dental health and psychosocial variables. Toothbrushing frequency had a very low but significant correlation with the distribution of plaque and gingivitis, accounting therefore for only a small % of the variance in the group. For the total group and right-handed toothbrushers, buccal plaque and gingivitis was significantly increased on right contralateral teeth. No specific pattern for plaque and gingivitis distribution by side was seen for 100 left-handed toothbrushers. Plaque and gingivitis also showed significant differences dependent upon arch, tooth number, and surface. The population is being followed at 4-year intervals to monitor the pattern of periodontal disease with time and correlate changes with these baseline findings.     

Acid and Microhardness of Mineral Trioxide Aggregate and Mineral Trioxide Aggregate–like Materials

Introduction

The aim of this study was to compare the surface microhardness of BioAggregate, ProRoot MTA, and CEM Cement when exposed to an acidic environment or phosphate-buffered saline (PBS) as a synthetic tissue fluid.

Methods

Ninety cylindrical molds made of polymethyl methacrylate with an internal diameter of 6 mm and height of 4 mm (according to ASTM E384 standard for microhardness tests) were fabricated and filled with BioAggregate (n = 30), tooth-colored ProRoot MTA (n = 30), or CEM Cement (n = 30). Each group was then divided into 3 subgroups of 10 specimens consisting of those exposed to distilled water, exposed to PBS (pH = 7.4), or exposed to butyric acid (pH = 5.4). After 1 week the Vickers surface microhardness test was performed. Statistical analysis included 2-way analysis of variance, followed by post hoc Dunnett T3 in cases with lack of homoscedasticity and Tukey honestly significant difference in cases with homoscedasticity.

Results

The indentations obtained from the CEM Cement specimens exposed to an acidic pH were not readable because of incomplete setting. There was a significant difference between the microhardness of the materials regardless of the environmental conditions (P < .001). In all the environmental conditions, MTA had significantly higher and CEM Cement had significantly lower microhardness values (P < .001). All experimental cements had significantly higher microhardness values when exposed to PBS (P < .001) and had significantly lower microhardness values when exposed to butyric acid (P < .001).

Conclusions

The surface microhardness of BioAggregate, ProRoot MTA, and CEM Cement was reduced significantly by exposure to butyric acid and increased significantly by exposure to PBS. In all environmental conditions, MTA had significantly higher microhardness values.