Biomechanical comparison of stemless humeral components in total shoulder arthroplasty

BackgroundThe purpose of this study was to compare initial fixation strength between various stemless and stemmed humeral components and to correlate implant fixation strength with bone mineral density (BMD).MethodsFive humeral stem designs were investigated: Stemless-A (four hollow fins), Stemless-B (central body, three solid fins), Stemless-C (central screw, peripheral rim-fit), Short stem (50 mm), and Standard stem (130 mm). Fifty cadaveric human humerii were obtained and divided into five groups. BMD within the humeral head was determined for all samples. The mean BMD was similar between groups. The 25 samples with the lowest and highest BMDs were categorized as “Low” and “High,” respectively, with a BMD threshold of 0.35 g/cm², creating BMD subgroups. After implantation, each sample underwent a standardized biomechanical testing protocol, with axial loading followed by torsional loading. Sensors attached to the specimen recorded micromotion throughout testing. Axial loading consisted of cyclic loading for 100 cycles at 3 peak forces (220, 520, and 820 N). Torsional loading consisted of 100 cycles of internal/external rotation at 0.1 Hz at 6 peak torques, or until failure (±2.5, 5, 7.5, 10, 12.5, and 15 Nm). Failure was defined as the torque at which any bone fracture, implant detachment from anchor/stem, or an excess of 50° internal/external rotation occurred. Groups and BMD subgroups were compared.ResultsAt maximal axial loading, Stemless-B demonstrated greater micromotion (540 μm) than Stemless-C (192 μm) (P = .003). Stemless-B and Stemless-A (387 μm) also had greater micromotion than Short stem (118 μm, P < .001, P = .03) and Standard stem (85 μm, P < .001, P = .01). When comparing low-BMD samples at maximal axial loading, these differences were accentuated, but comparison of high-BMD samples showed no significant differences between groups. Torsional testing demonstrated that Standard stem failed at greater torque (7.2 Nm) than Stemless-B (2.3 Nm, P < .001), Stemless-A (1.9 Nm, P < .001), and Stemless-C (3.9 Nm, P = .01). When comparing torsional testing results of low-BMD samples, both Standard stem and Short stem failed at greater torque than Stemless-B (P = .02, P = .003) and Stemless-A (P = .03, P = .004) but failed at a similar torque to Stemless-C. Torsional testing of high-BMD samples showed that Standard stem failed at a greater torque than all stemless designs.ConclusionStemless humeral implants should be used with caution in low-BMD settings (<0.35 g/cm²). A central screw and peripheral rim-fit stemless anchor design demonstrated greater fixation strength at low BMD when compared with other designs, while all stemless designs performed similarly at high BMD.Level of evidenceBasic Science Study; Cadaveric Study     

3-D Ultrasound Imaging Reliability of Measuring Dysplasia Metrics in Infants

Developmental dysplasia of the hip is a hip abnormality that ranges from mild acetabular dysplasia to irreducible femoral head dislocations. While 2-D B-mode ultrasound (US)-based dysplasia metrics or disease metrics are currently used clinically to diagnose developmental dysplasia of the hip, such estimates suffer from high inter-exam variability. In this work, we propose and evaluate 3-D US-derived dysplasia metrics that are automatically computed and demonstrate that these automatically derived dysplasia metrics are considerably more reproducible. The key features of our automatic method are (i) a random forest-based learning technique to remove regions across the coronal axis that do not contain bone structures necessary for dysplasia-metric extraction, thereby reducing outliers; (ii) a bone segmentation method that uses rotation-invariant and intensity-invariant filters, thus remaining robust to signal dropout and varying bone morphology; (iii) a novel slice-based learning and 3-D reconstruction strategy to estimate a probability map of the hypoechoic femoral head in the US volume; and (iv) formulae for calculating the 3-D US-derived dysplasia metrics. We validate our proposed method on real clinical data acquired from 40 infant hip examinations. Results show a considerable (around 70%) reduction in variability in two key 3-D US-derived dysplasia metrics compared with their 2-D counterparts.     

Low levels of the key B cell activation marker,HLA-DR,in COVID-19 hospitalized cases are associated with disease severity,dexamethasone treatment,and circulating IL-6 levels

Immunologic Research -     

Dose-response modeling of NLRP3 inflammasome-mediated diseases: asbestos,lung cancer,and malignant mesothelioma as examples

Abstract

Can a single fiber of amphibole asbestos increase the risk of lung cancer or malignant mesothelioma (MM)? Traditional linear no-threshold (LNT) risk assessment assumptions imply that the answer is yes: there is no safe exposure level. This paper draws on recent scientific progress in inflammation biology, especially elucidation of the activation thresholds for NLRP3 inflammasomes and resulting chronic inflammation, to model dose-response relationships for malignant mesothelioma and lung cancer risks caused by asbestos exposures. The modeling integrates a physiologically based pharmacokinetics (PBPK) front end with inflammation-driven two-stage clonal expansion (I-TSCE) models of carcinogenesis to describe how exposure leads to chronic inflammation, which in turn promotes carcinogenesis. Together, the combined PBPK and I-TSCE modeling predict that there are practical thresholds for exposure concentration below which asbestos exposure does not cause chronic inflammation in less than a lifetime, and therefore does not increase chronic inflammation-dependent cancer risks. Quantitative examples using model parameter estimates drawn from the literature suggest that practical thresholds may be within about a factor of 2 of some past exposure levels for some workers. The I-TSCE modeling framework explains previous puzzling aspects of asbestos epidemiology, such as why age at first exposure is a better predictor of lifetime MM risk than exposure duration. It may be a valuable tool for risk analysts when LNT assumptions are not justified due to inflammation response thresholds mediating dose-response relationships.     

Grappling with complexity: Medical students’ reflective writings about challenging patient encounters as a window into professional identity formation

Aim: Clerkship-specific interactive reflective writing (IRW)-enhanced reflection may enhance professional identity formation (PIF), a fundamental goal of medical education. PIF process as revealed in students? reflective writing (RW) has been understudied.

Methods: The authors developed an IRW curriculum within a Family Medicine Clerkship (FMC) and analyzed students? reflections about challenging/difficult patient encounters using immersion-crystallization qualitative analysis.

Results: The qualitative analysis identified 26 unique emergent themes and five distinct thematic categories (1. Role of emotions, 2. Role of cognition, 3. Behaviorally responding to situational context, 4. Patient factors, and 5. External factors) as well as an emergent PIF model from a directed content analysis. The model describes students? backgrounds, emotions and previous experiences in medicine merging with external factors and processed during student?patient interactions. The RWs also revealed that processing often involves polarities (e.g. empathy/lack of empathy or encouragement/disillusionment) as well as dissonance between idealized visions and lived reality.

Conclusions: IRW facilitates and ideally supports grappling with the lived reality of medicine; uncovering a “positive hidden curriculum” within medical education. The authors propose engaging learners in guided critical reflection about complex experiences for meaning-making within a safe learning climate as a valuable way to cultivate reflective, resilient professionals with “prepared” minds and hearts for inevitable challenges of healthcare practice.     

Can we further optimize therapeutic hypothermia for hypoxic-ischemic encephalopathy?

Perinatal hypoxic-ischemic encephalopathy is a leading cause of neonatal death and disability.Therapeutic hypothermia significantly reduces death and major disability associated with hypoxic-ischemic encephalopathy;however,many infants still experience lifelong disabilities to movement,sensation and cognition.Clinical guidelines,based on strong clinical and preclinical evidence,recommend therapeutic hypothermia should be started within 6 hours of birth and continued for a period of 72 hours,with a target brain temperature of 33.5 ±0.5℃ for infants with moderate to severe hypoxic-ischemic encephalopathy.The clinical guidelines also recommend that infants be re warmed at a rate of 0.5℃ per hour,but this is not based on strong evidence.There are no randomized controlled trials investigating the optimal rate of rewarming after therapeutic hypothermia for infants with hypoxic-ischemic encephalopathy.Preclinical studies of rewarming are conflicting and results were confounded by treatment with sub-optimal durations of hypothermia.In this review,we evaluate the evidence for the optimal start time,duration and depth of hypothermia,and whether the rate of rewarming after treatment affects brain injury and neurological outcomes.