Pre-marital predictors of marital violence in the WHO World Mental Health (WMH) Surveys

Social Psychiatry and Psychiatric Epidemiology - Intimate partner violence (IPV) is a pervasive public health problem. Existing research has focused on reports from victims and few studies have...     

An evaluation of impression techniques for multiple internal connection implant prostheses

STATEMENT OF PROBLEM: Movement of impression copings inside the impression material using an open-tray impression technique during clinical and laboratory phases may cause inaccuracy in transferring the 3-dimensional spatial orientation of implants intraorally to the definitive cast. Consequently the restoration may require corrective procedures. PURPOSE: This in vitro study evaluated the accuracy of 3 different impression techniques using polyether impression material to obtain a precise definitive cast for a multi-unit implant restoration with multiple internal connection implants. MATERIAL AND METHODS: A reference acrylic resin model with 4 internal connection implants (3i Implant Innovations) was fabricated. Forty-five medium-consistency polyether impressions (Impregum Penta) of this model were made with square impression copings using an open-tray technique. Three groups of 15 specimens each were made with different impression techniques: in the first group, nonmodified square impression copings were used (NM group); in the second group, square impression copings were used and joined together with autopolymerizing acrylic resin before the impression procedure (R [resin] group); and in the third group, square impression copings previously airborne-particle abraded and coated with the manufacturer-recommended impression adhesive were used (M [modified] group). Matching implant replicas were screwed into the square impression copings in the impressions. Impressions were poured with ADA type IV stone (New Fujirock). A single calibrated examiner blinded to the nature of the impression technique used examined all definitive casts to evaluate the positional accuracy (mum) of the implant replica heads using a profile projector (at original magnification x10). These measurements were compared to the measurements calculated on the reference resin model which served as control. Data were analyzed with a 1-way analysis of variance at alpha=.05, followed by the Student Newman-Keuls test (alpha=.05). RESULTS: The data obtained with the profile projector revealed significant differences within the 3 impression techniques ( P <.001). The Student Newman-Keuls procedure disclosed significant differences between the groups, with group R casts being significantly more accurate than group NM and group M casts ( P =.05). The mean distance (+/-SD) between the posterior implants compared to the reference acrylic resin model was 18.17 mum (+/- 6.4) greater for group R casts, 41.27 mum (+/- 8.4) greater for group M casts, and 46.21 mum (+/- 8.9) greater for group NM casts. Distances between the anterior implants were also greater than those recorded on the reference model. The distance was 15.23 mum (+/- 5.9) greater on group R casts, 38.17 mum (+/- 8.3) greater on group M casts, and 43.23 mum (+/- 8.7) greater on group NM casts. CONCLUSION: Within the limitations of this study, improved accuracy of the definitive cast was achieved when the square impression copings joined together with autopolymerizing acrylic resin were used to make an impression of multiple internal connection implants.     

Influence of rotational speed, torque and operator's proficiency on ProFile failures

AIM: The purpose of this study was to evaluate the influence of rotational speed, torque, and operator experience with a specific Ni-Ti rotary instrumentation technique on the incidence of locking, deformation and separation of instruments. METHODOLOGY: ProFile Ni-Ti rotary instruments (PRI) sizes 40-15 with a 6% taper were used in a crown-down technique. In one group of canals (n = 300) speeds of 150, 250 and 350 rpm (subgroups 1, 2 and 3) were used. Each one of the subgroups included 100 canals. In a second group (n = 300) torque was set at 20, 30 and 55 Ncm (subgroups 4, 5 and 6). In the third group (n = 300) three operators with varying experience (subgroups 7, 8 and 9) were also compared. Each subgroup included the use of 10 sets of PRI and 100 canals of extracted human molars. Each set of PRI was used in up to 10 canals and then sterilized before each case. NaOCl 2.5% was used as an irrigant. The number of locked, deformed, and separated instruments for the different groups, and within each part of the study was analysed statistically for significance with chi-squared tests. RESULTS: In group 1 only one instrument was deformed in the 150-rpm group and no instruments separated or locked. In the 250-rpm group instrument separation did not occur, however, a high incidence of locking, deformation and separation was noted in the 350-rpm group. In general, instrument sizes 30-15 locked, deformed and separated. Chi-squared statistics showed a significant difference between the 150 and 350 rpm groups but no difference between the 150 and 250 rpm groups with regard to instrument separation. Overall, there was a trend toward a higher incidence of instrument deformation and separation in smaller instruments. Locking and separation occurred during the final passage of the instruments, in the last (tenth) canal in each subgroup. In the second group, neither separation nor deformation and locking occurred during the use of the ProFile instruments, at 150 rpm, and at the different torque values. In the third group, chi-squared analysis demonstrated that significantly more instruments separated with the least experienced operator. Instrument locking, deformation, and separation did not occur with the most experienced operator. CONCLUSIONS: Preclinical training in the use of the PRI technique with crown-down at 150 rpm were crucial in avoiding instrument separation and reducing the incidence of instrument locking and deformation.     

Two patterns of histologic healing in an intrabony defect following treatment with enamel matrix derivative: a human case report

Human histologic evidence of periodontal regeneration following treatment of intrabony defects with enamel matrix derivative has yielded inconsistent results in recent case reports. A 46-year-old woman presenting one deep intrabony defect at the distal root of a mandibular first molar scheduled for extraction was selected for enamel matrix derivative therapy. During surgery, a notch was placed at the most apical level of calculus on the experimental root. Nine months postsurgery, a block section including the distal root and surrounding periodontal tissues was obtained and processed in a mesiodistal plane. Histologic analysis demonstrated two different patterns of healing along the proximal and furcal surfaces. Regeneration with new cellular cementum, bone, and periodontal ligament with functional fiber orientation was observed on the distal aspect of the root, whereas the furcal surface healed through ankylosis. This report underlines the biologic variability in wound healing following enamel matrix derivative therapy in periodontal intrabony defects and within the same defect. Host-specific intrinsic and/or extrinsic factors accounting for this variability remain to be investigated.