Bahcesehir long-term population-based screening compared to National Breast Cancer Registry Data: effectiveness of screening in an emerging country

PURPOSEWe aimed to show the effects of long-term screening on clinical, pathologic, and survival outcomes in patients with screen-detected breast cancer and compare these findings with breast cancer patients registered in the National Breast Cancer Registry Data (NBCRD).METHODSWomen aged 40–69 years, living in Bahcesehir county, Istanbul, Turkey, were screened every 2 years using bilateral mammography. The Bahcesehir National Breast Cancer Registry Data (BMSP) data were collected during a 10-year screening period (five rounds of screening). BMSP data were compared with the NBCRD regarding age, cancer stage, types of surgery, tumor size, lymph node status, molecular subtypes, and survival rates.RESULTSDuring the 10-year screening period, 8758 women were screened with 22621 mammograms. Breast cancer was detected in 130 patients; 51 (39.2%) were aged 40–49 years. The comparison of breast cancer patients in the two programs revealed that BMSP patients had earlier stages, higher breast-conserving surgery rates, smaller tumor size, more frequent negative axillary nodal status, lower histologic grade, and higher ductal carcinoma in situ rates than NBCRD patients (p = 0.001, for all).CONCLUSIONThese results indicate the feasibility of successful population-based screening in middle-income countries.

Breast cancer is the most frequent cancer and cause of cancer-related deaths among Turkish women, as well as globally (1–5). Although the incidence of breast cancer increases every year, mortality rates are decreasing in developed countries because of nationwide screening programs and modern treatment options (5, 6). An invited mammography screening program for women aged between 40 and 69 years revealed a 60% reduction in cancer-related 10-year mortality in a landmark study (7). A systematic review of Myers et al. (8) showed that breast cancer screening reduced mortality by 20% in average-risk women of all age groups. However, this review did not evaluate the differences between annual and biannual mammographic screening.In 2004, the Cancer Control Department of Turkey recommended biannual mammographic screening for women aged 50–69 years, based on European Guidelines. The population of Turkey is relatively young, and almost half of all breast cancer patients in Turkey are younger than 50 years. According to and National Breast Cancer Registry Data (NBCRD) reports, the starting age for mammography screening was set as 40 years. The Bahcesehir Mammographic Screening Program (BMSP) was the first organized population-based 10-year (2009–2019) mammography screening program in Turkey, a middle-income country.Turkish Federation of Breast Diseases Societies started a voluntary data registry program that was provided by breast surgeons working in secondary or tertiary hospitals. This program aimed to collect detailed information of breast cancer patients and to pool comprehensive country-specific breast cancer data. This registry, namely the NBCRD, was the first specified database on breast cancer in the country and was started in 2005, before the BMSP (9). Data from 36 centers were collected for 10 years. However, the cancer registry is a standard database containing general information as defined by the International Agency for Research on Cancer standards.The aim of this study was to show the feasibility of a population-based breast cancer screening program in an emerging, middle-income country, Turkey. The objective of our study was to evaluate the effectiveness of a population-based breast cancer screening program by comparing it with NBCRD data.     

Influence of previous provisional cementation on the bond strength between two definitive resin-based luting and dentin bonding agents and human dentin

This study evaluated the effect of two different types of provisional luting agents (RelyX Temp E, eugenol-based; RelyX Temp NE, eugenol-free) on the shear bond strengths between human dentin and two different resin-based luting systems (RelyXARC-Single Bond and Duo Link-One Step) after cementation with two different techniques (dual bonding and conventional technique). One hundred human molars were trimmed parallel to the original long axis, to expose flat dentin surfaces, and were divided into three groups. After related surface treatments for each specimen, the resin-based luting agent was applied in a silicone cylindrical mold (3.5 x 4 mm), placed on the bonding-agent-treated dentin surfaces and polymerized. In the control group (n = 20), the specimens were further divided into two groups (n = 10), and two different resin-based luting systems were immediately applied following the manufacturer's protocols: RelyX ARC-Single Bond (Group I C) and Duo Link-One Step (Group II C). In the provisionalization group (n = 40), the specimens were further divided into four subgroups of 10 specimens each (Group I N, I E and Group II N, II E). In Groups I N and II N, eugenol-free (RelyX NE), and in groups I E and II E, eugenol-based (RelyX E) provisional luting agents (PLA), were applied on the dentin surface. The dentin surfaces were cleaned with a flour-free pumice, and the resin-based luting systems RelyX ARC (Group I N and E) and Duo Link (Group II N and E) were applied. In the Dual bonding groups (n = 40), the specimens were divided into four subgroups of 10 specimens each (Group I ND, ED and Group II ND, ED). The specimens were treated with Single Bond (Groups I ND and ED) or One Step (Groups II ND and ED). After the dentin bonding agent treatment, RelyX Temp NE was applied to Groups I ND and II ND, and RelyX Temp E was applied to Groups I ED and II ED. The dentin surfaces were then cleaned as described in the provisionalization group, and the resin-based luting systems were applied: RelyX ARC-Single Bond (Group I ND and ED) and Duo Link-One Step (Group II ND and ED). After 1,000 thermal cycles between 5 degrees C and 55 degrees C, shear bond testing was conducted at a crosshead speed of 0.5 mm/minutes. One-way ANOVA, followed by a post hoc Tukey test (alpha = 0.05) was done. The dentin-resin-based luting system interfaces were evaluated under a scanning electron microscope. There was a significant reduction in the mean shear bond strength values of groups subjected to the provisionalization compared to the control and dual bonding technique groups (p < 0.05). The composition of provisional luting did not create a significant difference with regard to reducing shear bond strength values (p > 0.05). With regard to resin based luting systems, the shear bond strength values of the double-bond technique groups were not significantly different from the controls (p > 0.05).     

Synthesis,cytotoxicity, and antibacterial studies of 2,4,5,6-substituted hexahydro-1H-isoindole-1,3(2H)-dione

In this study, synthesis of novel isoindole-1,3-dione analogues bearig halo, hydroxy, and acetoxy groups at the position 4,5,6 of the bicyclic imide ring was performed to examine their potential anticancer effects against some cell lines. A multistep chemical pathway was used to synthesize the derivatives. The cytotoxic effect of trisubstituted isoindole derivatives were evaluated by determining cellular viability using the MTT assay against A549, PC-3, HeLa, Caco-2, and MCF-7 cell lines. The C-2 selective ring-opening products were obtained from the ring-opening reaction of 5-alkyl/aryl-2-hydroxyhexahydro-4H-oxireno[2,3-e]isoindole-4,6(5H)-diones with nucleophiles such as chloride (Cl⁻) and bromide (Br⁻) ions. In addition, the ring-opening products halodiols were converted to their related acetates. The anticancer activity of synthesized isoindole-1,3-dione derivatives was investigated against HeLa, A549, MCF-7, PC3, and Caco-2 cells in vitro and resulted in varies cytotoxic effect depend on the group attached to the isoindole molecule. Furthermore, the evaluation of the antimicrobial action of trisubstituted isoindole derivatives against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria was assessed and found out selective inhibition of the both bacterial growth via different trisubstituted isoindole derivatives. The results of this work encourage further research on the potential utilization of trisubstituted isoindole derivatives as cytotoxic and antimicrobial agents.     

Relationship between the G protein–coupled oestrogen receptor and spermatogenesis,and its correlation with male infertility

The aim of this study was to investigate the diagnostic value of serum G protein–coupled oestrogen receptor (GPER) levels and their correlation with semen parameters in men with infertility. The participants were divided into two groups as follows: 76 fertile control men (Group 1) and 77 infertile men (Group 2). Semen analysis, hormonal evaluation, serum GPER level and scrotal ultrasound of the participants were evaluated. Follicle-stimulating hormone and total testosterone levels were not significantly different between the groups (p = .413 and p = .535 respectively). The oestradiol level in Group 1 was significantly lower than that in Group 2 (p < .001). The serum GPER level was found to be significantly higher in Group 1 than that of Group 2 (p < .001). GPER levels were positively correlated with the total sperm count, sperm concentration, motility and morphology in Group 2 (r = 0.303, 0.345, 0.260 and 0.322, respectively, p < .001). In this study, GPER levels were positively correlated with sperm parameters, and it was hypothesised that the decrease in GPER expression might be associated with male infertility by adversely affecting spermatogenesis.     

Antibacterial and mechanical properties of propolis added to glass ionomer cement

Objective:To investigate whether adding ethanolic extracts of propolis (EEP) might influence the antibacterial and mechanical (shear-peel band strength [SPBS]) properties of conventional glass ionomer cement (GIC) used in orthodontic band cementation.Materials and Methods:The cement was divided into four groups: one using the original composition and three with 10%, 25%, and 50% EEP added to the liquid and then manipulated. An antimicrobial assay, broth-dilution method was used to determine the antibacterial capacity of the GIC containing EEP. Eighty teeth were used for the mechanical assay, and an Instron testing machine was used to evaluate the SPBS. Kolmogorov-Smirnov and Kruskal-Wallis tests were used for statistical analyses.Results:GIC with the addition of 25% and 50% EEP activated inhibition of Streptococcus mutans (ATCC 25175) growth, but this effect did not occur in the group to which 10% EEP was added or in the control GIC group. There was no significant difference between the groups in terms of SPBS (P > .05).Conclusions:The addition of EEP may increase antibacterial properties without negatively modifying the mechanical properties of conventional GIC.     

Racial differences in adiponectin in youth: relationship to visceral fat and insulin sensitivity

OBJECTIVE: The purpose of this study was to investigate 1) whether adiponectin is associated with insulin sensitivity independent of visceral adipose tissue in African-American and Caucasian youth and 2) whether adiponectin is associated with racial differences in insulin sensitivity. RESEARCH DESIGN AND METHODS: Total body fat was measured by dual-energy X-ray absorptiometry and abdominal adipose tissue with computed tomography. Insulin sensitivity was measured by a 3-h hyperinsulinemic-euglycemic clamp. RESULTS: Adiponectin was inversely associated (P < 0.01) with visceral adipose tissue, fasting insulin, and proinsulin and was positively related (P < 0.01) to insulin sensitivity after controlling for Tanner stage and sex independent of race. Stepwise multiple regression revealed that adiponectin was a strong independent predictor of insulin sensitivity, explaining 27% of the variance in insulin sensitivity. When subjects were categorized into tertiles of visceral adipose tissue and further low (< or = 50th) and high (>50th) adiponectin groups, insulin sensitivity was significantly different across the visceral adipose tissue groups (main effect, P < 0.01) in both races. However, within each visceral adipose tissue group, subjects with high adiponectin had higher insulin sensitivity (main effect, P < 0.05) than subjects with low adiponectin, independent of race. Racial differences in insulin sensitivity remained significant (P < 0.01) after controlling for leptin and visceral adipose tissue but not (P > 0.05) after additional adjustment for adiponectin. CONCLUSIONS: Adiponectin is associated with insulin sensitivity independent of visceral adipose tissue in both African-American and Caucasian youth. Low adiponectin in African-American youth may be a biological marker that predisposes them to a greater risk of insulin resistance.     

Multiple sulfatase deficiency: A case series of four children

Multiple sulfatase deficiency is biochemically characterized by the accumulation of sulfated lipids and acid mucopolysaccharides. The gene sulfatase-modifying factor 1 (SUMF1), recently identified, encodes the enzyme responsible for post-translational modification of a cysteine residue, which is essential for the activity of sulfatases. We describe clinical findings and mutation analysis of four patients. The patients presented with hypotonia, developmental delay, coarse face, ichthyosis, and hepatosplenomegaly. The diagnosis was made through clinical findings, enzymatic assays, and mutation analysis. We were detected to be homozygous for a novel missense mutation c. 739G > C causing a p.G247R amino acid substitution in the SUMF1 protein.Key Words: Child, multiple sulfatase deficiency, sulfatase-modifying factor 1 gene     

Current status of micro/nanomotors in drug delivery

Abstract

Synthetic micro/nanomotors (MNMs) are novel, self-propelled nano or microscale devices that are widely used in drug transport, cell stimulation and isolation, bio-imaging, diagnostic and monitoring, sensing, photocatalysis and environmental remediation. Various preparation methods and propulsion mechanisms make MNMs “tailormade” nanosystems for the intended purpose or use. As the one of the newest members of nano carriers, MNMs open a new perspective especially for rapid drug transport and gene delivery. Although there exists limited number of in-vivo studies for drug delivery purposes, existence of in-vitro supportive data strongly encourages researchers to move on in this field and benefit from the manoeuvre capability of these novel systems. In this article, we reviewed the preparation and propulsion mechanisms of nanomotors in various fields with special attention to drug delivery systems.