Ceramic-on-ceramic vs ceramic-on-polyethylene,a comparative study with 10-year follow-up

BACKGROUNDIn press-fit total hip arthroplasty (THA) ceramic-on-ceramic (CoC) bearings are a potential for overcoming the wear that is seen in ceramic-on-polyethylene (CoPE) bearings, and can lead to wear-induced osteolysis, resulting in loosening of the implant. However, CoC bearings show disadvantages as well, such as squeaking sounds and being more fragile, which can cause ceramic head or liner fracture. Because comparative long-term studies are limited, the objective of this study was to determine the long-term difference in wear, identify potential predictive factors for wear, investigate radiological findings such as osteolysis, and evaluate clinical functioning and complications between these bearings.AIMTo determine 10-year differences in wear, predictive factors for wear, and investigate radiological findings and clinical functioning between CoC and CoPE.METHODSThis observational prospective single-center cohort study with a 10-year follow-up includes a documented series of elective THAs. Primary outcome was wear measured by anteroposterior (AP) radiographs. Secondary outcomes were potential predictive factors for wear, complications during follow-up, Harris hip score (HHS), and radiological findings such as presence of radiolucency, osteolysis, atrophy, and hypertrophy around the cup. Due to the absence of wear in the CoC group, stratified analysis to identify risk factors for wear was only performed in the CoPE group by use of univariate linear regression analysis. HHS was expressed as a change from baseline and the association with bearing type was assessed by use of multivariate linear regression analysis, adjusted for potential confounders.RESULTSA total of 17 CoPE (63.0%) and 25 CoC (73.5%) cases were available for follow-up and showed a linear wear of respectively 0.130 mm/year (range 0.010; 0.350) and 0.000 mm/year (range 0.000; 0.005), which was significant (P < 0.001) between both groups. Wear always occurred in the cranial direction. Cup inclination was the only predictive factor for polyethylene (PE) wear. No dislocations, ceramic head, or liner fractures were seen. The HHS showed a mean change from baseline of 37.1 points (SD 18.5) in the CoPE group and 43.9 (SD 17.0) in the CoC group. This crude difference of 6.8 (range -5.2; 18.7) in favor of the CoC group was not significant (P = 0.26) and was not significant when adjusted for age, gender, and diagnosis either (P = 0.99). No significant differences in complications and radiological findings were seen between groups. CONCLUSIONCoC bearing shows lower wear rates compared to CoPE at 10-year follow-up with cup inclination as a predictive factor for wear and no differences in complications, HHS, and radiological findings.     

High Capsid–Genome Correlation Facilitates Creation of AAV Libraries for Directed Evolution

Directed evolution of adeno-associated virus (AAV) through successive rounds of phenotypic selection is a powerful method to isolate variants with improved properties from large libraries of capsid mutants. Importantly, AAV libraries used for directed evolution are based on the “natural” AAV genome organization where the capsid proteins are encoded in cis from replicating genomes. This is necessary to allow the recovery of the capsid DNA after each step of phenotypic selection. For directed evolution to be used successfully, it is essential to minimize the random mixing of capsomers and the encapsidation of nonmatching viral genomes during the production of the viral libraries. Here, we demonstrate that multiple AAV capsid variants expressed from Rep/Cap containing viral genomes result in near-homogeneous capsids that display an unexpectedly high capsid–DNA correlation. Next-generation sequencing of AAV progeny generated by bulk transfection of a semi-random peptide library showed a strong counter-selection of capsid variants encoding premature stop codons, which further supports a strong capsid–genome identity correlation. Overall, our observations demonstrate that production of “natural” AAVs results in low capsid mosaicism and high capsid–genome correlation. These unique properties allow the production of highly diverse AAV libraries in a one-step procedure with a minimal loss in phenotype–genotype correlation.     

A Hybrid Radioactive and Fluorescent Tracer for Sentinel Node Biopsy in Penile Carcinoma as a Potential Replacement for Blue Dye

Background

Sentinel node (SN) biopsy in penile cancer is typically performed using a combination of radiocolloid and blue dye. Recently, the hybrid radioactive and fluorescent tracer indocyanine green (ICG)-^99mTc-nanocolloid was developed to combine the beneficial properties of both radio-guidance and fluorescence imaging.

Objective

To explore the added value of SN biopsy using ICG-^99mTc-nanocolloid in patients with penile carcinoma.

Design, setting, and participants

Sixty-five patients with penile squamous cell carcinoma were prospectively included (January 2011 to December 2012). Preoperative SN mapping was performed using lymphoscintigraphy and single-proton emission computed tomography supplemented with computed tomography (SPECT/CT) after peritumoural injection of ICG-^99mTc-nanocolloid. During surgery, SNs were initially approached using a gamma probe, followed by patent blue dye and/or fluorescence imaging. A portable gamma camera was used to confirm excision of all SNs.

Surgical procedure

Patients underwent SN biopsy of the cN0 groin and treatment of the primary tumour.

Outcome measurements and statistical analysis

The number and location of preoperatively identified SNs were documented. Intraoperative SN identification rates using radio- and/or fluorescence guidance were assessed and compared with blue dye. Statistical evaluation was performed using a two-sample test for equality of proportions with continuity correction.

Results and limitations

Preoperative imaging after injection of ICG-^99mTc-nanocolloid enabled SN identification in all patients (a total of 183 SNs dispersed over 119 groins). Intraoperatively, all SNs identified by preoperative SN mapping were localised using combined radio-, fluorescence-, and blue dye guidance. Fluorescence imaging enabled visualisation of 96.8% of SNs, while only 55.7% was stained by blue dye (p < 0.0001). The tissue penetration of the fluorescent signal, and the rapid flow of blue dye limited the detection sensitivity. A tumour-positive SN was found in seven patients.

Conclusions

ICG-^99mTc-nanocolloid allows for both preoperative SN mapping and combined radio- and fluorescence-guided SN biopsy in penile carcinoma patients and significantly improves optical SN detection compared with blue dye.     

Cone-beam Computed Tomographic Scans in Comparison with Periapical Radiographs for Root Canal Length Measurement: An In Situ Study

Introduction

The primary aim of this study was to compare the precision of root canal length determination on cone-beam computed tomographic (CBCT) scans and periapical radiographs (PAs) with the actual root canal length. The secondary aim was to examine the influence of tooth type on root canal length measurements as assessed on CBCT scans and PAs.

Methods

In total, 40 root canals of 33 teeth (molars, premolars, canines, and incisors) out of 5 dentate maxillas of human cadavers were included. Root canal length measurement was performed by a consensus panel (2 examiners) on CBCT scans (3D Accuitomo 170; J Morita, Kyoto, Japan) and digital PAs. After straight-line access opening, a #15 file was fixated in every root canal at the length measured on CBCT scans. All teeth were extracted, and the root canal containing the file was uncovered. Measurements made on images taken with a digital camera (AxioCam; Carl Zeiss, Sliedrecht, The Netherlands) linked to a stereozoom microscope (Stemi SV6, Carl Zeiss) were used as the actual root canal length.

Results

When all roots were examined together, it was not clear which method is better for all types of teeth. For root canals of anterior teeth, there was no significant difference between the 2 methods. For root canals of posterior teeth, CBCT images gave results significantly closer to the actual root canal length in comparison with PAs (t value = −1.96; critical value is 1.74 with a significance level of 0.05).

Conclusions

Root canal length measurements of posterior maxillary teeth were more accurate when assessed by CBCT images than PAs.     

Treatment of myogenic temporomandibular disorder: a prospective randomized clinical trial,comparing a mechanical stretching device (TheraBite®) with standard physical therapy exercise

Aims:

To compare in a randomized controlled clinical trial (RCT) the application of the TheraBite® (TB) Jaw Motion Rehabilitation System with a standard physical therapy (PT) exercise regimen for the treatment of myogenic temporomandibular disorder (TMD).

Methodology:

Myogenic TMD patients were randomized for the use of the TB device or for standard PT. Mandibular function was assessed with the mandibular function impairment questionnaire (MFIQ). Pain was evaluated using a visual analog scale, and maximum inter-incisor (mouth) opening (MIO) was measured using the disposable TB range of motion scale.

Results:

Of the 96 patients randomized (46 TB, 50 standard PT exercises), 38 actually started with the TB device and 41 with the standard PT exercises. After six-week follow-up, patients using the TB device reported a significantly greater functional improvement (MFIQ score) than the patients receiving regular PT exercises (P?=?0·0050). At 6 weeks, no significant differences in pain, and active or passive MIO were found between the two groups. At 3 months, patients in both treatment groups did equally well, and showed a significant improvement in all parameters assessed.

Conclusions:

This RCT on myogenic TMD treatment, comparing standard PT with passive jaw mobilization using the TheraBite Jaw Motion Rehabilitation System®, shows that both treatment modalities are equally effective in relieving myogenic TMD symptoms, but that the use of the TB device has the benefit of achieving a significantly greater functional improvement within the first week of treatment.