寰枢椎后路柔性固定的生物力学研究

目的分析细棒、PEEK棒固定对寰枢关节稳定性的影响。方法采用6具新鲜成人枕骨(occipital bone,Oc)~颈椎C4节段进行测试,模拟以下手术及固定状态:①完整状态;②损伤状态:枢椎齿状突II型骨折;③坚强固定:寰枢椎均采用普通椎弓根螺钉固定,直径3.5 mm钛棒连接;④PEEK棒:直径3.5 mm的PEEK棒连接;⑤细棒:直径2.0 mm钛棒连接。采用重复测量实验设计,在完整、损伤和不同的固定状态下,通过脊柱试验机对标本分别施加1.5 N·m的前屈/后伸、左/右侧弯和左/右轴向旋转的纯力偶矩。采用Optotrak三维运动测量系统连续采集标本运动,分析寰枢椎之间角度运动范围和中性区。结果采用直径3.5 mm的钛棒,2.0 mm的细棒以及3.5 mm的PEEK棒固定后,在前屈、后伸、侧弯和旋转方向上均显著减小了固定节段的运动范围(P<0.05)。直径3.5 mm和2.0 mm的棒固定后的运动范围,在各个方向上无显著性差异。PEEK棒固定的运动范围仅在侧弯方向上大于坚强固定(P=0.005),其他方向无显著性差异。3种固定方式在屈伸、侧弯和旋转方向上均显著减小了固定节段的中性区(P<0.05)。各种固定方式之间相比较,无显著性差异(P>0.05)。结论在寰枢关节采用直径2.0 mm的细棒固定,与坚强固定的稳定性相当。采用直径3.5 mm的PEEK棒固定,在前屈、后伸、旋转方向上与坚强固定的稳定性相当,在侧弯方向上弱于坚强固定。     

Genomic variants within chromosome 14q32.32 regulate bone mass through MARK3 signaling in osteoblasts

Bone mineral density (BMD) is a highly heritable predictor of osteoporotic fracture. GWAS have identified hundreds of loci influencing BMD, but few have been functionally analyzed. In this study, we show that SNPs within a BMD locus on chromosome 14q32.32 alter splicing and expression of PAR-1a/microtubule affinity regulating kinase 3 (MARK3), a conserved serine/threonine kinase known to regulate bioenergetics, cell division, and polarity. Mice lacking Mark3 either globally or selectively in osteoblasts have increased bone mass at maturity. RNA profiling from Mark3-deficient osteoblasts suggested changes in the expression of components of the Notch signaling pathway. Mark3-deficient osteoblasts exhibited greater matrix mineralization compared with controls that was accompanied by reduced Jag1/Hes1 expression and diminished downstream JNK signaling. Overexpression of Jag1 in Mark3-deficient osteoblasts both in vitro and in vivo normalized mineralization capacity and bone mass, respectively. Together, these findings reveal a mechanism whereby genetically regulated alterations in Mark3 expression perturb cell signaling in osteoblasts to influence bone mass.     

牙支持3D导板辅助穿刺卵圆孔射频热凝治疗三叉神经痛的疗效分析

目的:探讨牙支持式3D打印导板辅助穿刺卵圆孔射频热凝治疗三叉神经痛术中术后的疗效分析.方法:对2019年1月～2021年5月收治的三叉神经痛患者40人,根据患者需要随机分成2组:A组(对照组),常规按照Hartel前入路法穿刺卵圆孔,进入卵圆孔后,耳-床线定位确定入颅深度后行射频治疗.B组(导板组),采用3D导板,给患者戴上导板固定后,完成穿刺,耳-床线定位确定入颅深度后行射频治疗.分析2组的术前疼痛评分(VAS)术后即刻及术后1月疼痛消失的有效率,手术时间,穿刺次数,并发症,穿刺的偏移程度.结果:与对照组A组比较在术后即刻有效率、术后1月随访有效率比较无统计学差异(P>0.05).在穿刺次数、穿刺偏移率、手术时间、并发症两组间比较有统计学差异(P<0.05).导板与牙齿紧密贴合率100％.结论:3D打印导板应用于穿刺卵圆孔具有明显的优势,可以减少患者创伤,减少X线辐射,减少穿刺偏移,术后疗效肯定,值得广泛应用.     

Efficacy and safety of transjugular intrahepatic portosystemic shunt (TIPS) created using covered stents of different diameters: A systematic review and meta-analysis

PurposeThe purpose of this study was to make a systematic review and meta-analysis to determine the stent diameter (8 mm vs. 10 mm) that conveys better safety and clinical efficacy for transjugular intrahepatic portosystemic shunt (TIPS).Materials and methodsFour databases were used to identify clinical trials published from inception until March 2020. Data were extracted to estimate and compare one-year and three-year overall survivals, hepatic encephalopathy, variceal rebleeding, and shunt dysfunction rates between patients with 8 mm covered stents and those with 10 mm covered stents.ResultsFive eligible studies were selected, which included 489 patients (316 men, 173 women). The 8 mm covered stent group had higher efficacy regarding one-year or three-year overall survival (odds ratio [OR], 2.88; P = 0.003) and (OR, 1.81; P = 0.04) and lower hepatic encephalopathy (OR, 0.69; P = 0.04) compared with 10 mm covered stent group. There were no significant differences in variceal rebleeding rate (OR 0.80; P = 0.67). However, shunt dysfunction was lower in 10 mm covered stent group (OR, 2.26; P = 0.003).ConclusionsOur results suggest that the use of 8 mm covered stents should be preferred to that of 10 mm covered stents for TIPS placement when portal pressure is frequently monitored.     

A Priori Subcell Limiting Approach for the FR/CPR Method on Unstructured Meshes

A priori subcell limiting approach is developed for high-order flux reconstruction/correction procedure via reconstruction (FR/CPR) methods on two-dimensional unstructured quadrilateral meshes. Firstly, a modified indicator based on modal energy coefficients is proposed to detect troubled cells, where discontinuities exist. Then, troubled cells are decomposed into nonuniform subcells and each subcell has one solution point. A second-order finite difference shock-capturing scheme based on nonuniform nonlinear weighted (NNW) interpolation is constructed to perform the calculation on troubled cells while smooth cells are calculated by the CPR method. Numerical investigations show that the proposed subcell limiting strategy on unstructured quadrilateral meshes is robust in shock-capturing.