血清低密度脂蛋白胆固醇直接测定与Friedewald公式计算结果比较

采用聚乙烯硫酸（ＰＶＳ）沉淀法测定血清低密度脂蛋白胆固醇（ＬＤＬ－Ｃ）值，同时应用Ｆｒｉｅｄｅｗａｌｄ公式计算ＬＤＬ－Ｃ含量，并对两法结果进行比较分析，提出当甘油三脂（ＴＧ）＜４．５２ｍｍｏｌ／Ｌ时，Ｆ公式计算法可代替ＰＶＳ法，当ＴＧ＞４．５２ｍｍｏｌ／Ｌ时，不宜用Ｆ公式计算ＬＤＬ－Ｃ的值。     

补体对免疫沉淀的抑制作用与小儿肾脏疾病的关系

以辣根过氧化物酶（PO）和抗-PO作为免疫沉淀中的抗原和抗体，用光电比色法，对78例小儿肾脏疾病血清补体对免疫沉淀的抑制作用（IIPC）进行了研究，并同时检测补体成分C3、C4。结果，正常对照IIPCOD值为0．505±0．085，急性肾小球肾炎（0．137±0．108）显著降低（P＜0．001）；慢性肾小球肾炎（0．470±0．053）改变不明显（P＞0．05）；肾病综合征（0．401±0．038）明显低下（P＜0．05）。IIPC低下的发生率依次为急性肾小球肾炎（83％）、肾病综合征（43％）、慢性肾小球肾炎（32％）。表明小儿肾小球疾病时IIPC大多降低并与疾病的活动性有关。因此认为IIPC低下在肾脏病的发生和发展中起一定作用。     

盐析法提取卵黄免疫球蛋白的研究

为了确定盐析法提取特异性卵黄免疫球蛋白的最佳盐浓度，采用SDS—PAGE鉴定IgY的纯度，用RID测定IgY含量，间接ELISA法检测特异性卵黄抗体的活性。结果表明：用饱和度50％的硫酸铵盐析一次，再用140g／L的硫酸钠溶液盐析，可以获得469，6的回收率和77％的纯度。盐析液经超滤膜包超滤后制得的冷冻干燥制品，保持了完整的抗体结构和良好的抗体活性。这一结果为IgY的进一步分离纯化奠定了基础。     

Production of genetically modified cells expressing specific transgenes by retroviral vectors for gene therapy

Summary Techniques and protocols are described for the generation of genetically modified cells that can be used for gene therapy. Primary fibroblast cultures are established from skin biopsies, maintained in culture, frozen for long-term storage, and retrieved when necessary. Retroviral packaging cell lines are generated by transfection of DNA into retroviral packaging cells by calcium-phosphate precipitation method or by lipofection method. To generate cell lines expressing high titer virus, individual colonies of cells are cloned and the virus titer is determined. Virus collected from packaging cells expressing high titer virus is then used to infect primary fibroblasts. To obtain fibroblast cell lines expressing high amounts of transgenes, individual cells can be cloned to generate clonal cell lines. Although the methods described here are for fibroblasts, the same methods or modification of the methods can be used for other cell types.     

Heparin-induced extracorporal low-density-lipoprotein precipitation (H. E. L. P.) to improve the recovery of hearing in patients with sudden idiopathic hearing loss

The pathogenesis of sudden hearing loss (SHL) is still not well understood. Possible causes include increased blood viscosity, microthrombosis or altered blood flow. Hypercholesterolemia, hyperfibrinogenemia and increased platelet aggregation are frequently observed in patients with SHL. The aim of this study was to investigate whether drastic lowering of plasma cholesterol and fibrinogen by selective extracorporal apheresis could have a beneficial effect on hearing recovery in these patients. Seven patients with SHL were treated with an extracorporal procedure removing fibrinogen and cholesterol from plasma. Six of the seven patients showed an immediate improvement in auditory thresholds following a single treatment of heparin-induced low-density lipoprotein precipitation. These findings indicate for the first time that acute and drastic removal of plasma fibrinogen and low-density lipoproteins may be an effective clinical method for the treatment of patients with SHL. Received: 19 February 1999 / Accepted: 6 May 1999     

LDL-C直接测定法在生化分析仪上的应用

用日本第一化学药品株式会社LDL—C试剂盒在BeckmanCX4型自动生化分析仪上直接测定血清LDL—C含量。方法批内CV 0 37%～ 1 11% ,批间CV为 2 11%～ 3 0 2 % (n =2 0 )。平均回收率为 98 9% ,在 8 10mmol/L浓度范围内呈良好线性关系。TG <5 0 0mmol/L时与聚乙烯硫酸沉淀法 (X1)及Friedewald(X2 )公式计算结果相关良好 ,回归方程分别为Y =0 988X1+0 0 47,r=0 95 1,Y =0 96 1X2 +0 0 5 2 ,r=0 930。LDL—C直接测定法简单、快速 ,用血量少 ,勿需沉淀分离 ,适宜于自动化分析。     

红景天提取液精制工艺的考察

目的：优选红景天提取液的精制工艺。方法：采用了醇沉法和絮凝法两种精制方法。结果：壳聚糖絮凝法优于明胶絮凝法。壳聚糖絮凝法与醇沉法比较红帚天苷保留率分别为95．32％，88.15％；固体物保留率分别为59.7％，63．0％。结论：壳聚糖絮凝法的红景天苷保留率明显高于醇沉法，且两种工艺的固体量无显著性差异。     

血清中异丙酚的HPLC测定

建立了检测血清中异丙酚的反相高效液相色谱-荧光法.血清样品经含内标百里酚的丙酮溶液直接沉淀后,采用KR100-5 C18柱,甲醇-0.1%三氟醋酸溶液(80:20)为流动相,荧光激发波长为276nm,发射波长为307nm.异丙酚在0.05～12.8μg/ml范围内与峰面积比线性关系良好.检测限为150pg,异丙酚和百里酚的提取回收率均大于90%,批内、批间精密度为1.11%～6.88%.     

前馈控制方法及其在丹红注射液醇沉工艺品质提升中的应用

该文基于质量源于设计理念,建立一种中药生产过程前馈控制方法,以减少原料质量波动对产品质量的影响.以丹红注射液的醇沉工艺为例,通过Box-Behnken试验设计,建立浓缩液性质、工艺参数与醇沉上清液性质之间的数学模型,并建立工艺参数优化模型,根据物料性质计算合适的工艺参数.比较了使用优化前后工艺参数进行醇沉得到的上清液质量.结果表明,使用前馈控制方法优化醇沉工艺参数能有效地控制上清液质量,有助于提高醇沉工艺上清液质量的一致性.     

Microstructural Evolution during Accelerated Tensile Creep Test of ZK60/SiCp Composite after KoBo Extrusion

In the current study, the creep properties of magnesium alloy reinforced with SiC particles were investigated. For this purpose, ZK60/SiCp composite was produced by the stir casting method following the KoBo extrusion and precipitation hardening processes. The creep tests were performed at 150 °C under 10–110 MPa. The results showed that the stress exponent (n) and the average true activation energy (Q) was changed at high stresses, was found with increasing stress, the creep mechanism changing from grain boundary sliding to dislocation climb. The results of microstructure characterization after the creep test showed that at low stresses, the dynamic recrystallization resulting from twinning induced the GBS mechanism. However, at high stresses, with increasing diffusion rates, conditions are provided for dynamic precipitation and the dislocation climb of the dominant creep mechanism. Examination of the fracture surfaces and the surrounding areas showed that the cavity nucleation in the ternary boundary and surrounding precipitation was the main cause of damage. The evaluation of the samples texture after creep showed that the unreinforced alloy showed a moderately strong fiber texture along the angle of ϕ₁ = 0–90°, which was tilted about Φ = 10°. A new strong texture component was observed at (90°, 5°, 0°) for the composite sample, which crept due to minor splitting of the basal pole by ~5° toward RD.