Conserving resources in the diagnosis of intraoral fibroepithelial polyps

Fibroepithelial polyps (FEPs) are common, benign intraoral lesions that tend to develop slowly at predictable sites, often in response to local irritation or trauma. Historical precedent often results in referral to oral and maxillofacial surgery (OMFS) departments for biopsy, often irrespective of symptoms, and histological assessment. OMFS and pathology services are struggling to cope with an increasing workload that will potentially lead to widespread delays to diagnosis and treatment. Over the past 20 years, clinical pathways and guidance have been developed to ensure that healthcare interventions, such as the removal of third molars, tonsils, skin tags, and benign moles, are evidence-based, have a net patient benefit, and ensure the best use of finite NHS resources. However, no such guidance exists for intraoral lesions and we regard this as an oversight. We analysed the removal of 682 FEPs over a seven-year period and report sensitivities of 92.4% for a “confirmed clinical suspicion of an FEP” and 99.7% for a “confirmed clinical suspicion of a benign diagnosis”. The incidence of non-benign disease was 0.3%. Primary care dentists should be able to diagnose and monitor FEPs and refer only if symptoms are serious or in high-risk patients or sites. Adopting this practice across the UK could free up to 1825 four-hour OMFS clinics, 405 hours of consultant histopathologists’ time, and recurring savings to the NHS estimated to be in the region of £620 000/annum. We believe that the removal of FEPs should be reclassified as an “intervention not normally funded”, and the time and resources put to better use treating patients with lesions of questionable pathology.     

Contribution to the rheological testing of pharmaceutical semisolids

Rheological behaviour of pharmaceutical semisolid preparations significantly affects manufacturing process, administration, stability, homogeneity of incorporated drug, accuracy of dosing, adhesion in the place of application, drug release, and resulting therapeutic effect of the product. We performed test of consistency by penetrometry, rotational, oscillation and creep tests, and squeeze and tack tests of model samples to introduce methods suitable for characterization and comparison of semisolids in practice. Penetrometry is a simple method allowing sorting the semisolids to low and high stress-resistant materials but deficient for rheological characterization of semisolids. Value of yield stress, generally considered to be appropriate feature of semisolids, is significantly influenced by the method of testing and the way of evaluation. The hysteresis loops of model semisolids revealed incomplete thixotropy, therefore, three-step thixotropy test was employed. Semisolids showed nonlinear response in the creep phase of tests and partial recovery of structure by storing energy in the recovery phase. Squeeze and tack tests seem to be convenient ways for comparison of semisolids. Our study can contribute to a better understanding of different flow behaviour of semisolids given by different physicochemical properties of excipients and can bring useful approaches to evaluation and comparison of semisolids in practice.     

Near-infrared fluorescence imaging improves the nodal yield in neck dissection in oral cavity cancer – A randomized study

IntroductionLymph node yield (LNY) in neck dissection has been identified as a prognostic factor in oral cavity cancer. The purpose of this study was to investigate the impact of additional use of optical imaging on LNY in therapeutic ND in oral cancer.MethodsConsecutive patients with oral squamous cell carcinoma with clinical neck metastasis planned for primary tumor resection were randomized to conventional neck dissection or near-infrared fluorescence (NIRF)-guided neck dissection, respectively. In the intervention group, patients were injected with ICG-Nanocoll prior to surgery. Intraoperatively, an optical hand-held camera system was used for lymph node identification. Also, NIRF imaging of the neck specimen was performed, and optical signals were pinned with needle markings to guide the pathological examination. The endpoint of the study was LNY per neck side in levels Ib-III.Results31 patients were included with 18 neck sides in the control group and 18 neck sides in the intervention group for evaluation. During NIRF-guided ND, individual lymph nodes could be identified by a bright fluorescent signal and individual tumor-related drainage patterns could be observed in the neck. The LNY in the intervention group was significantly higher compared to the control group (p = 0.032) with a mean of 24 LN (range: 12–33 LN in levels Ib-III compared to 18 LN (range: 10–36 LN) in the control group, respectively.ConclusionsNIRF-guided ND significantly improved the nodal yield compared to the control group. Intraoperative real-time optical imaging enabled direct visualization of tumor-related drainage patterns within the neck lymphatics.     

地膜覆盖条件下红花生长发育规律及其与产量关系的研究

对地膜覆盖条件下红花生长发育规律及其与产量的关系进行了研究。结果表明,地膜红花与露地红花生长发育规律基本一致,但地膜红花生育进程明显提前,各个阶段的生长量明显增多,花的产量及籽粒产量极显著提高。     

不同繁殖材料对半夏产量的影响

实验表明:半夏有性繁殖种子田间出苗率为0～25%,且实生苗当年不能形成商品;无性繁殖则以珠芽和小块茎作种明显优于大块茎。     

锰、铁、锌、铜4种微量元素对芍药生长和芍药苷含量的影响

目的:研究锰、铁、锌、铜4种元素对二、三年生芍药生长的影响.方法:采用完全随机区组,测定施用各微量元素后芍药产量等生理指标和质量指标芍药苷的变化,并用原子吸收分光光度法测定各元素在芍药根、茎、叶及土壤中的含量.结果与结论:锰、铁、锌、铜在一定水平下能显著促进芍药的生长并能提高根中芍药苷的含量,但施用过多会产生生长抑制,除锌外其他元素均不在根中积累.     

生物代谢过程的热力学研究——乙醇生成的理论转化率及代谢能级特征

根据生物代谢状态方程和代谢反应一般表达式,解析由葡萄糖生成乙醇的生物代谢过程。结果表明,该过程是一个可达到热力学最大可能性的过程,该代谢过程的热力学最大可能性转化率为51.1%,方程的解与依据代谢途径直接核算的结果一致,说明这些代谢途径已实现了热力学上的最大可能性。研究表明由葡萄糖生成乙醇的代谢过程具有非连续的能级特征。研究结果为深入解析代谢过程的物理意义奠定了基础。     

自制新荧光剂EPQS的性能测试

作者对自制新荧光剂EPQS进行了性能测试。结果:量子产率为0.21;最大激发波长和荧光波长分别为375nm和484nm,stokes位移109nm;检测生物化合物常用的缓冲溶液对荧光峰位无影响,对荧光强度影响很小;温度的影响也小(18～43℃,FRI61.5～58.1),PH的影响也不大。说明EPQS不仅荧光参数好,而且稳定性也好。适合在较广泛的环境条件下使用。     

苯并恶唑类化合物的研究——Ⅰ.化合物的合成及光物理性能

合成了四种结构类型的苯并恶唑化合物共15个:测试了它们的红外吸收光谱,以及它们在DMF中的紫外吸收、荧光发射和激光发射光谱。苯基取代物的荧光量子产率在0.64～0.66,无激光性能。其余的化合物荧光量子产率都大于0.70,在最大吸收波长下的激光转换效率为2.5～5.9%。     

A comparative study of plateletpheresis using Baxter Autopheresis C and Haemonetics PCS Plus

SUMMARY. This study compared plateletpheresis on the Haemonetics PCS Plus (PCS Plus) and the Baxter Autopheresis C (Auto C) using the same 100 selected donors. The number of packs meeting UK BTS/NIBSC specification (>2.2 times 10¹¹ platelets per pack) was achieved by 99% of PCS Plus and 82% of Auto C procedures. The positive correlation found between donor precount and final platelet yield was better for the PCS Plus. Both machines met U.K. specification for white-cell contamination but this was significantly greater for the Auto C. Plasma yields were similar.
As a result of this study we chose to use the PCS Plus for routine plateletpheresis in our unit. This has enabled us not only to comply with UK BTS/NIBSC specifications for apheresis platelets easily and cost effectively but also to meet our own higher specification (2.75 times 10¹¹ platelets per pack) using existing staff and without extending the working day.