Prospective characterization of incident hepatic steatosis in pediatric and adolescent patients after total pancreatectomy with islet autotransplantation

BackgroundHepatic steatosis has been described as a common finding in adults following total pancreatectomy with islet autotransplantation (TPIAT) but it is unknown if this occurs in children and adolescents.ObjectivesTo define the frequency of post-TPIAT hepatic steatosis in a sample of children and adolescents and to identify clinical predictors of incident steatosis post-TPIAT.MethodsIn this prospective study, consecutive participants at least 1-month post-TPIAT underwent a liver MRI with proton density fat fraction (PDFF) and blood draw at our pediatric academic medical center between April 2021 and January 2022. Comparison clinical pre-TPIAT liver MRI or ultrasound and insulin use and graft function data were extracted from the medical record. T-tests were used for the comparison of means across continuous variables between participants with and without post-TPIAT steatosis.ResultsA total of 20 participants (mean: 13 ± 4 years; 12 female) were evaluated. Mean liver PDFF at research MRI was 7.4 ± 6.2% (range: 2–25%). Seven participants (35%) had categorical hepatic steatosis (PDFF>5%) post-TPIAT, five of whom had pre-TPIAT steatosis, reflecting a 13% (2/15; 95% CI: 2–40%) incidence of post-TPIAT steatosis. Participant characteristics were not significantly different between subgroups with and without post-TPIAT steatosis. Mean PDFF at research MRI was not different between graft function subgroups (7.5% optimal/good vs. 7.3% marginal/failure; p = .96).ConclusionOur study shows a moderate prevalence but low incidence of hepatic steatosis in a small sample of children and adolescents post-TPIAT. This study raises questions about a causal relationship between TPIAT and hepatic steatosis.     

Comparison study of patient demographics and patient-related risk factors for peri-prosthetic joint infections following primary total shoulder arthroplasty

BackgroundWhile studies have demonstrated favorable outcomes in utilization of primary total shoulder arthroplasty (TSA) for the treatment of glenohumeral osteoarthritis (OA), adverse events such as infections can still occur. Periprosthetic joint infections (PJIs) are associated with worse outcomes and patient morbidity. The purpose of this study was to: (1) compare patient demographics amongst TSA patients with and without PJIs following primary TSA; and (2) identify patient-related risk factors for PJIs following primary TSA.MethodsPatients undergoing primary TSA for the treatment of glenohumeral OA were identified using the Mariner administrative claims database by CPT code 23,472. Laterality modifiers were utilized to ensure PJIs were developing in the correct laterality as those patients undergoing primary TSA. Inclusion for the study group consisted of patients who developed PJIs within 2-years after the index procedure, whereas patients who did not develop PJIs served as the comparison cohort. Primary outcomes analyzed included patient demographics and patient-related risk factors for PJIs following primary TSA. A stepwise backwards elimination multivariate binomial logistic regression analyses was performed to determine the odds (OR) of PJIs in patients undergoing primary TSA. A P value less than .05 was considered statistically significant.ResultsThe query yielded 15,396 patients who underwent primary TSA for glenohumeral OA, of which 191 patients developed PJIs and 15,205 did not develop PJIs. The study found statistically significant differences amongst patients who did and did not develop PJIs following primary TSA with respect to age, sex, and presence of comorbid conditions. Risk factors associated with developing PJIs following primary TSA included: pathologic weight loss (OR: 2.06, P < .0001), obesity (OR: 1.56, P = .0001), male sex (OR: 1.52, P = .007), and peripheral vascular disease (OR: 1.46, P = .022).ConclusionAs the number of primary TSAs for the treatment of glenohumeral OA increase worldwide, identifying modifiable risk-factors to reduce the incidence of infection is critical. The study found various modifiable and non-modifiable risk factors associated with developing PJIs following primary TSA. This study is valuable to orthopedists in order to identify and risk-stratify patients with regard to PJI in the setting of primary TSA for OA.Level of EvidenceLevel III; Case-Control Study     

PSMA-CAR-CIK转基因细胞体外杀伤三种前列腺癌细胞株效率的研究北大核心

目的:本研究通过检测前列腺特异性膜抗原(prostate specific membrane antigen,PSMA)-肿瘤特异性嵌合抗原受体(chimeric antigen receptor,CAR)-细胞因子诱导的杀伤细胞(cytokine induced killer cell,CIK)转基因细胞杀伤三种前列腺癌细胞株的效率,鉴定其用于后期治疗前列腺癌的可行性。方法:通过已经构建的二代PSMA-CAR慢病毒表达载体转染CIK细胞,构建PSMA-CAR-CIK转基因细胞;通过CCK8法检测CIK细胞及PSMA-CAR-CIK转基因细胞杀伤三种前列腺癌细胞株PC3、LNCaP、DU145的效率及效靶比。结果:转基因PSMA-CAR-CIK细胞构建成功;3 h~3.5 h为检测效应细胞对靶细胞细胞毒活性时与CCK8试剂孵育的最佳时间;两种效应细胞均在效靶比为10∶1、15∶1、20∶1时,杀伤率逐步增高,无统计学意义(P>0.05),但与其它组相比差异显著(P<0.05)。结论:两种效应细胞对于前列腺癌细胞的杀伤,只要效靶比达到10∶1的比例,就能起到一个较好的杀瘤效果,并且随着效应细胞的增加,其抗肿瘤能力逐步加强;转基因PSMA-CAR-CIK细胞的构建为CAR技术治疗前列腺癌的临床应用奠定了基础。     

Effectiveness of a double-carbapenem combinations against carbapenem-resistant Gram-negative bacteria

The emergence of carbapenem-resistant organisms posed considerable threat to global health while only limited treatment options are available and led to efforts to discover a novel way to treat them. To evaluate in vitro synergistic activity of meropenem plus ertapenem, a total of 203 carbapenem-resistant strains, collected from 12 provinces and municipalities in China, were examined with a dual carbapenem combination therapy. The statistical software R was used for analysis. Two hundred and one (201) of carbapenem-resistant strains mainly produced four types of carbapenemase: KPC-2 (n = 142, 69.95%), OXA-232 (n = 7, 3.45%), NDM (n = 38, 18.72%; 36 NDM-1, 1 NDM-4, 1 NDM-5), and IMP (n = 15, 7.39%; 1 IMP-26, 10 IMP-30, 4 IMP-4). Fifty-one out of two hundred and three (51/203 or 25.12%) of the examined strains showed a synergistic effect for the meropenem plus ertapenem combination throughout the checkerboard method, while only three isolates showed potential clinically relevant synergy (3/203, 1.48%). An additive effect was observed in 55/203 (27.09%) of the examined strains. Ninety-seven of the examined isolates (47.78%) showed fractional inhibitory concentration (FIC) greater or equal to 2 (indicating antagonism). The synergistic activity of meropenem plus ertapenem combination suggests this combination can be a possible way to treat the infection caused by the carbapenem-resistant organisms, especially for IMP or NDM producer with a lesser minimum inhibitory concentration (MIC) and the infected individual who was not recommended to use colistin or tigecycline.     

Biomechanical comparison of stemless humeral components in total shoulder arthroplasty

BackgroundThe purpose of this study was to compare initial fixation strength between various stemless and stemmed humeral components and to correlate implant fixation strength with bone mineral density (BMD).MethodsFive humeral stem designs were investigated: Stemless-A (four hollow fins), Stemless-B (central body, three solid fins), Stemless-C (central screw, peripheral rim-fit), Short stem (50 mm), and Standard stem (130 mm). Fifty cadaveric human humerii were obtained and divided into five groups. BMD within the humeral head was determined for all samples. The mean BMD was similar between groups. The 25 samples with the lowest and highest BMDs were categorized as “Low” and “High,” respectively, with a BMD threshold of 0.35 g/cm², creating BMD subgroups. After implantation, each sample underwent a standardized biomechanical testing protocol, with axial loading followed by torsional loading. Sensors attached to the specimen recorded micromotion throughout testing. Axial loading consisted of cyclic loading for 100 cycles at 3 peak forces (220, 520, and 820 N). Torsional loading consisted of 100 cycles of internal/external rotation at 0.1 Hz at 6 peak torques, or until failure (±2.5, 5, 7.5, 10, 12.5, and 15 Nm). Failure was defined as the torque at which any bone fracture, implant detachment from anchor/stem, or an excess of 50° internal/external rotation occurred. Groups and BMD subgroups were compared.ResultsAt maximal axial loading, Stemless-B demonstrated greater micromotion (540 μm) than Stemless-C (192 μm) (P = .003). Stemless-B and Stemless-A (387 μm) also had greater micromotion than Short stem (118 μm, P < .001, P = .03) and Standard stem (85 μm, P < .001, P = .01). When comparing low-BMD samples at maximal axial loading, these differences were accentuated, but comparison of high-BMD samples showed no significant differences between groups. Torsional testing demonstrated that Standard stem failed at greater torque (7.2 Nm) than Stemless-B (2.3 Nm, P < .001), Stemless-A (1.9 Nm, P < .001), and Stemless-C (3.9 Nm, P = .01). When comparing torsional testing results of low-BMD samples, both Standard stem and Short stem failed at greater torque than Stemless-B (P = .02, P = .003) and Stemless-A (P = .03, P = .004) but failed at a similar torque to Stemless-C. Torsional testing of high-BMD samples showed that Standard stem failed at a greater torque than all stemless designs.ConclusionStemless humeral implants should be used with caution in low-BMD settings (<0.35 g/cm²). A central screw and peripheral rim-fit stemless anchor design demonstrated greater fixation strength at low BMD when compared with other designs, while all stemless designs performed similarly at high BMD.Level of evidenceBasic Science Study; Cadaveric Study     

人参内生菌的研究进展

内生菌由细菌、真菌、古菌和原生生物组成，它们生活在植物的活体组织中，具有丰富的次级代谢产物多样性。人参内生菌在人参的生长发育、次级代谢产物的生成和环境适应等方面均有重要的促进作用，对人参的产量和品质有较大影响。随着人们在微生物领域研究的深入，高通量测序技术已经成为研究植物内生菌的重要方法。文章主要从人参内生菌分离与鉴定研究方法、人参内生菌的多样性、人参内生菌及其次级代谢产物的活性、人参内生菌对宿主的影响等4个方面对人参内生菌近年来的研究进展进行讨论，并对其发展方向提出展望，以期为药用植物内生菌研究和品质改良提供新思路、新方法。