Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.     

Heteroepitaxy of Cerium Oxide Thin Films on Cu(111)

An important part of fundamental research in catalysis is based on theoretical and modeling foundations which are closely connected with studies of single-crystalline catalyst surfaces. These so-called model catalysts are often prepared in the form of epitaxial thin films, and characterized using advanced material characterization techniques. This concept provides the fundamental understanding and the knowledge base needed to tailor the design of new heterogeneous catalysts with improved catalytic properties. The present contribution is devoted to development of a model catalyst system of CeO₂ (ceria) on the Cu(111) substrate. We propose ways to experimentally characterize and control important parameters of the model catalyst—the coverage of the ceria layer, the influence of the Cu substrate, and the density of surface defects on ceria, particularly the density of step edges and the density and the ordering of the oxygen vacancies. The large spectrum of controlled parameters makes ceria on Cu(111) an interesting alternative to a more common model system ceria on Ru(0001) that has served numerous catalysis studies, mainly as a support for metal clusters.     

Sensitive skin: correlation with skin surface microrelief appearance

BACKGROUND/PURPOSE: Sensitive skin is a condition associated with reduced tolerance to environmental factors and/or the application of topical products, such as cosmetics. Its pathophysiology has not been fully elucidated and few data are available on its prevalence. The aim of this study was to investigate possible correlation between objective sensitivity and skin surface microrelief. METHODS: During an epidemiological survey conducted for a campaign promoted by International Society of Plastic Dermatology in Italy, 243 adult healthy subjects of both sexes with no evident dermatological disorder but positive to the lactic acid stinging test, were submitted to cyanoacrylate stratum corneum stripping from the volar forearm for the determination of the irregularity of the skin surface microrelief (irregularity skin index (ISI)). RESULTS: A significant correlation was found between intensity of symptoms in stingers and ISI (r(s)=-0.47; P<0.001). CONCLUSION: Sensitive skin is common in the healthy population. ISI can contribute towards the identification of subjects with sensitive skin and the development of more specific skin treatments for this prevalent condition.     

电镜下的乙型肝炎表面抗原

本文对81例乙型肝炎病人的肝活检组织进行了电镜观察,发现HBsAg的阳性率达93.8％。电镜下,HBsAg细丝不仅有一般的管状细丝型,还有分枝管型和管泡型,而且CAH病人肝组织不易找到HBsAg丝(易见者仅9％),CPH,CLH则多数(79.5％)为易见及可见,二者有高度显著性差异(P<0.01)。     

磁共振脑表面成像在矢状窦旁脑膜瘤术中应用

目的 探讨磁共振脑表面成像技术在矢状窦旁腩膜瘤手术中的应用价值.方法 分析本院经头颅CT及MRI诊断为矢状窦旁脑膜瘤,利用显微手术技术切除并经病理证实的的22例患者;术前均运用磁共振脑表面成像技术评估与肿瘤关系密切的脑表面回流静脉情况.术中根据成像结果有目的 地保护重要的回流静脉,对比患者手术前后神经功能恢复状况,并进行随访来评价手术效果.结果 22例患者的术前磁共振脑表面成像中脑表面回流静脉与术中所见高度一致.术后患者恢复良好,未出现与静脉损伤相关的并发症.结论 磁共振脑表面成像技术能在术前明确矢状窦旁脑膜瘤与脑表面回流静脉之间关系,可在术前对患者肿瘤表面脑回流静脉做出正确的评估,对脑表面重要回流静脉的保护提供了准确的影像学依据,对患者神经功能的保护及术后恢复起到重要作用.     

Immunogenicity and safety of a novel yeast Hansenula polymorpha-derived recombinant Hepatitis B candidate vaccine in healthy adolescents and adults aged 10–45 years

The aim was to determine whether the immunogenicity of an investigational hepatitis B vaccine (spHB) is at least as high as that of a licensed control vaccine, Engerix B^®, and to evaluate its safety before inclusion in new pediatric combination vaccines. Two randomized, controlled, blind-observer, Phase 3 trials were performed: one in Argentina (344 participants aged 10–15 years, 10 μg HBsAg/dose) and one in Uruguay (344 participants aged 16–45 years, 20 μg HBsAg/dose). Both vaccines were given in a 0, 1, 6 month schedule to all participants with a baseline anti-Hep B antibody titer <0.6 mIU/mL. Antibody titers were measured pre-dose 1, 1 month after dose 2, pre-dose 3, and 1 month after dose 3. Statistical non-inferiority analyses were performed on seroprotection rates (SP) post-dose 3 (% with anti-Hep B titers ≥10 mIU/mL; delta non-inferiority limit of −10%). In both studies, SP for the spHB vaccine was 100% and the spHB vaccine was non-inferior in terms of SP to the licensed control vaccine. GMTs post-dose 3 were approximately 1.8- and 4.1-fold higher for spHB in the 10–15 year and 16–45 year age groups, respectively. Reactogenicity was low for each vaccine, after each dose. This highly immunogenic hepatitis B candidate vaccine was selected for further investigation as a component of new pediatric combination vaccines.     

Ex vivo neutrophil function in response to three different doses of glycosylated rHuG-CSF (Lenograstim)

Granulocyte colony-stimulating factor (G-CSF) is being considered as adjuvant treatment for infections in non-neutropenic patients. Normal healthy donors were given rHuG-CSF (Lenograstim) at 2.5, 5.0 and 7.5 μg/kg subcutaneously daily for 5 d. Polymorphonuclear leucocyte (PMN) function tests were carried out on peripheral blood PMN before the first injection and at 24 h and 96 h. Circulating PMN levels were also measured at these time intervals and found to be significantly increased with all doses by 24 and 96 h. Investigation of cell surface antigen expression revealed no changes in β₂ integrin (CD11b/CD18) expression. L-selectin (CD62L) expression was reduced with all doses by 96 h, this being significant with the 7.5 μg/kg dose. FcγRI (CD64) levels were significantly up-regulated with the 7.5 μg/kg dose by 96 h whereas FcγRIII (CD16) expression was found to be reduced during G-CSF treatment. Superoxide anion production was significantly increased in response to N -formylmethionylleucylphenylalanine (FMLP) and opsonized Staphylococcus epidermidis stimulation at 24 h and 96 h with the 5.0 and 7.5 μg/kg doses. The initial rate of phagocytosis (0–2 min) appeared to have increased with the 7.5 and 5.0 μg/kg doses at 96 and 24 h compared with PMN responses pretreatment, although these increases were not statistically significant. These results show that G-CSF enhances the functional responses of PMN stimulated by physiological agonists and may help in the treatment of infections.     

Relationship of "bleeding on probing" and "gingival index bleeding" as clinical parameters of gingival inflammation

Abstract Bleeding on probing (BOP) and the gingival index have been used to clinically characterize the degree of gingival inflammation. It is, however, unclear to what extent these parameters correlate to each other and to probing pocket depth (PD). The purpose of this clinical study was to evaluate the association between BOP and GI bleeding (scores of 2 and 3), as well as the relationship of these variables to PD, in a group of patients presenting with naturally-occurring gingivitis. Based on screening examinations of 125 subjects with at least 20 teeth, no more than 4 sites with PD over 6 mm, a BOP frequency of 30% or greater, and no systemic condition that would influence the inflammatory response, were selected. 2 weeks after screening they were examined at 6 sites per tooth for plaque index, GI, PD and BOP. A standardized pressure sensitive probe (Florida Probe) with 20 g probing force was used for BOP and PD measurements. In this population, means of 40.9% (S.E.= 1.36) BOP sites and 35.3% (S.E, = 1.81) GI bleeding sites per patient were found. A total of 20,008 sites ranging in PD up to 5.9 mm were evaluated; however, the majority of sites (19,723, 98.6%) presented with <4 mm PD. When sites were evaluated, BOP demonstrated a positive correlation with PD, whereas GI bleeding correlated with PH. For sites characterized by the absence of BOP as well as the absence of GI bleeding (scores 0 and 1), the highest % of agreement between the 2 indices (77.7%) was found in shallow sites (0.1–2 mm). In contrast, when sites presenting with both BOP and GI bleeding were analyzed, the highest % of agreement (85,4%) was found for sites with PD >4.0 mm. In this gingivitis population group, it appears that BOP and GI bleeding evaluate distinct inflammatory1 conditions of the gingival tissues, and the relationship between the 2 clinical parameters may vary according to PD at the individual site examined.     

Surface behavior of axolemma monolayers: Physico-chemical characterization and use as supported planar membranes for cultured Schwann cells

The axolemma membrane forms a stable and reproducible monomolecular layer at the air-aqueous interface. The major lipids and proteins are present in this monolayer in molar ratios similar to the original membrane. Acetylcholinesterase and Na-K-ATPase activities are preserved in the monolayer to levels of 64% and 25%, respectively. The total lipid fraction forms a homogeneously mixed phase. The presence of proteins in the monolayer introduces surface inhomogeneties. Among other features, this is revealed by the presence of two values of lateral pressure at which the monolayer shows partial or total collapse: a broad partial collapse at surface pressures between 13 to 30 mN/m and a sharp collapse point at 46 mN/m. The average molecular areas, the broad collapse point, and the variation of the surface potential per molecule suggest the relocation of protein components at surface pressures between 13 to 30 mN/m. The behavior is consistent with the extrusion and exposure of proteins toward the aqueous medium that depends on the lateral pressure. Schwann cells grown on coverslips coated with axolemma monolayers at 13 mN/m (beginning of the broad collapse) and 34 mN/m (above the broad collapse) recognize the difference in the surface organization of axolemma caused by the lateral pressure which affects their proliferation, morphology, and spatial pattern of organization. Our results show for the first time that response of Schwann cells depends on the intermolecular organization of the axolemma surface with which they interact. These results suggest that the local expression of putative surface molecules of axolemma that may mediate membrane recognition and the signalling of morphological and proliferative changes can be modulated by long range supramolecular properties. © 1993 Wiley-Liss, Inc.