红外光谱数据融合对栽培滇重楼产地鉴别*

目的 多样的环境因素使得不同产地栽培滇重楼的化学成分也丰富多样，不同居群栽培滇重楼的甾体皂苷类成分具有很大的差异，多源数据融合分析能更全面的表征药材化学信息，建立一个高效而准确的产地鉴别模型，为其资源合理开发利用提供依据。方法 以来自云南和四川的8个产地（保山、楚雄、大理、红河、丽江、成都、文山、玉溪）共366份栽培滇重楼根茎为实验材料，采集其傅里叶变换近红外光谱（FT-NIR）和衰减全反射-傅里叶变换中红外光谱（ATR-FTMIR）数据。采用Kennard-Stone算法将不同产地的样品分为2/3的训练集和1/3的预测集，基于4种特征变量提取方法（CARS、VIP、SPA、SO-Covsel）结合2种数据融合策略（低级数据融合和中级数据融合），建立偏最小二乘产地判别分析模型。根据模型参数交叉验证均方根误差（RMSECV）和预测均方根误差（RMSEP）评估模型的稳定性，模型训练集和预测集准确率（ACC）评估模型分类性能。结果 近红外光谱和中红外光谱均能反应不同产地栽培滇重楼的化学成分差异，在中级数据融合中，基于VIP和SPA提取的特征变量建立的模型正确率均大于94%。相较于中级数据融合，低级数据融合模型得到了最为满意的结果，其预测集分类正确率达到100%。结论 根据近红外和中红外数据建立的低级数据融合PLS-DA模型，能够用于栽培滇重楼的产地鉴别分析。     

外伤性晶状体脱位合并周边隐匿性视网膜病变的临床特征及预后分析

目的观察分析眼球钝挫伤合并外伤性晶状体脱位患者周边隐匿性视网膜病变的临床特点及预后。 方法本研究纳入2013年1月至2020年1月在柳州市人民医院眼科住院诊断为眼球钝挫伤合并外伤性晶状体脱位，并行23G微创玻璃体切割联合白内障摘除手术的72例（72眼）患者。根据裂隙灯和超声生物显微镜（UBM）检查，将患者分为晶状体不全脱位组和全脱位组，详细记录2组患者的术中周边视网膜病变情况，并分析其临床特征及疗效。 结果眼球钝挫伤合并外伤性晶状体脱位患者中有周边隐匿性视网膜病变的占72.22%，其中晶状体不全脱位组发生率高达80.95%，显著大于晶状体全脱位组的60.00%（P＜0.05）。2组患者的周边隐匿性视网膜病变均以隐匿性视网膜裂孔、变性和出血为最常见。所有患者术后视网膜情况稳定，视力预后较好。 结论眼球钝挫伤合并外伤性晶状体脱位患者常出现周边隐匿性视网膜病变，最常见的是视网膜裂孔、出血、变性。23G微创玻璃体切割联合白内障摘除手术是有效治疗手段，具有创伤小、并发症少的优势。     

Fluoxetine-induced hepatic lipid accumulation is mediated by prostaglandin endoperoxide synthase 1 and is linked to elevated 15-deoxy-Δ12,14PGJ2

Major depressive disorder and other neuropsychiatric disorders are often managed with long-term use of antidepressant medication. Fluoxetine, an SSRI antidepressant, is widely used as a first-line treatment for neuropsychiatric disorders. However, fluoxetine has also been shown to increase the risk of metabolic diseases such as non-alcoholic fatty liver disease. Fluoxetine has been shown to increase hepatic lipid accumulation in vivo and in vitro. In addition, fluoxetine has been shown to alter the production of prostaglandins which have also been implicated in the development of non-alcoholic fatty liver disease. The goal of this study was to assess the effect of fluoxetine exposure on the prostaglandin biosynthetic pathway and lipid accumulation in a hepatic cell line (H4-II-E-C3 cells). Fluoxetine treatment increased mRNA expression of prostaglandin biosynthetic enzymes (Ptgs1, Ptgs2, and Ptgds), PPAR gamma (Pparg), and PPAR gamma downstream targets involved in fatty acid uptake (Cd36, Fatp2, and Fatp5) as well as production of 15-deoxy-Δ^12,14PGJ₂ a PPAR gamma ligand. The effects of fluoxetine to induce lipid accumulation were attenuated with a PTGS1 specific inhibitor (SC-560), whereas inhibition of PTGS2 had no effect. Moreover, SC-560 attenuated 15-deoxy-Δ^12,14PGJ₂ production and expression of PPAR gamma downstream target genes. Taken together these results suggest that fluoxetine-induced lipid abnormalities appear to be mediated via PTGS1 and its downstream product 15d-PGJ₂ and suggest a novel therapeutic target to prevent some of the adverse effects of fluoxetine treatment.     

Selective Laser Melting of Al-Based Matrix Composites with Al2O3 Reinforcement: Features and Advantages

Aluminum matrix composites (AMC) are of great interest and importance as high-performance materials with enhanced mechanical properties. Al₂O₃ is a commonly used reinforcement in AMCs fabricated by means of various technological methods, including casting and sintering. Selective laser melting (SLM) is a suitable modern method of the fabrication of net-shape fully dense parts from AMC with alumina. The main results, achievements, and difficulties of SLM applied to AMCs with alumina are discussed in this review and compared with conventional methods. It was shown that the initial powder preparation, namely the particle size distribution, sphericity, and thorough mixing, affected the final microstructure and properties of SLMed materials drastically. The distribution of reinforcing particles tends to consolidate the near-melting pool-edges process because of pushing by the liquid–solid interface during the solidification process that is a common problem of various fabrication methods. The achievement of an homogeneous distribution was shown to be possible through both the thorough mixing of the initial powders and the precise optimization of SLM parameters. The strength of the AMCs fabricated by the SLM method was relatively low compared with materials produced by conventional methods, while for superior relative densities of more than 99%, hardness and tribological properties were obtained, making SLM a promising method for the Al-based matrix composites with Al₂O₃.     

Depression in a Patient With Alzheimer Disease

This is a case study of a 73-year-old woman recently diagnosed with Alzheimer disease living in an assisted living facility who presented to an outpatient behavioral health clinic with her son for evaluation and treatment of depression. This article highlights the presentation of depression (a diagnosis) versus apathy (a symptom of Alzheimer disease) and the need to assess for co-occurring mood disorders that warrant pharmacologic intervention as well as treatment for cognitive decline in Alzheimer disease.