虚拟现实技术在枢椎椎弓根螺钉精确植入中的应用研究

目的探索以虚拟现实技术为基础的枢椎椎弓根螺钉置人方法。方法选取8具成人颅一颈椎标本，采用改良四柱式定位框架固定于枕颈，使颅-颈-肩形成统一刚体，保持空间位置恒定，CT薄层扫描获取枢椎三维定位信息，采用Aero—Tech立体定向手术规划系统三维建模，设计安全、可视化、个体化的虚拟置钉路径，反复虚拟演示验证钉道安全后，导向弓把持下置人导向钢针，复查CT评价置钉的准确性。结果16个枢椎椎弓根置钉过程中，方向出现偏差（横突孔突破）1个，失败率为6．25％。结论目标椎弓根的容积三维重建、置钉路径可视化设计和虚拟演示，使操作过程简单、直观而精确，不需要线形和角性参数的测量；加上导向抓持装置提供的稳定性，使该技术具有很好的临床应用前景。     

Tendon Graft—Ulna Fixation in Distal Radio-Ulnar Joint Stabilisation; Biomechanical Comparison of Three Graft-Bone Fixation Methods

A common distal radio-ulnar joint (DRUJ) stabilisation procedure uses a tendon graft running from the lip of the radial sigmoid notch to the ulnar fovea and through a bony tunnel to the ulnar shaft, before being wrapped round the distal ulna and sutured to itself. Such graft fixation can be challenging and requires a considerable tendon length. The graft length could be reduced by fixing the graft to the ulna using a bone anchor or interference screw. The aim of this study was to compare the strength of three distal ulna graft fixation methods (tendon wrapping and suturing, bone anchor and interference screw). Four human cadaveric ulnae were used. A tendon strip was run through a tunnel in the distal ulna and secured by: (1) wrapping round the shaft and suturing it to itself, (2) a bone anchor and (3) an interference screw in the bone tunnel. Load to failure was determined using a custom-made apparatus and an Instron machine. Maximum failure load was highest for the bone anchor fixation (99.3 ± 23.7 N) followed by the suturing (96.2 ± 12.1 N), and the interference screw fixation (46.9 ± 5.6 N). There was no significant difference between the tendon suturing and bone anchor methods, but the tendon suturing was statistically significantly higher compared to the interference screw (P = 0.028). In performing anatomical stabilisation of the DRUJ fixation of the tendon graft to the distal ulna with a bone anchor provides the most secure fixation. This may make the stabilisation technique less demanding and require a smaller tendon graft.     

应用动力髁螺钉联合骨肽注射液治疗股骨髁上骨不连疗效观察

目的观察应用动力髁螺钉联合骨肽注射液治疗股骨髁上骨不连的疗效。方法53例股骨髁上骨不连患者随机分为两组：对照组（26例）和治疗组（27例）,两组均应用动力髁螺钉治疗,治疗组加用骨肽注射液治疗。随访,进行疗效评价,记录骨愈合时间和测定疼痛指数。结果治疗组疗效优于对照组。结论应用动力髁螺钉联合骨肽注射液治疗股骨髁上骨不连可提高疗效。     

小切口动力髋螺钉治疗高龄股骨转子间骨折

[目的]探讨应用小切口动力髋螺钉(DHS)微创固定治疗高龄股骨转子间骨折的方法及临床效果.[方法]回顾性分析2001年8月～2006年1月应用闭合复位、小切口DHS固定治疗37例高龄股骨转子间骨折患者,其中男15例,女22例;年龄72～92岁,平均81.5岁.在C型臂X线机监视下,先将1～2枚克氏针经皮通过大转子打入股骨头上部.另将1枚导针按135°颈干角打入股骨头中央,在导针下做一长约4～5.5 cm纵切口,经导针拧入粗拉力螺纹钉.拔出导针将带套管接骨板沿肌层下插入,并将接骨板的套管套入螺纹钉的尾端.[结果]手术时间40～75 min,平均60 min.术中平均出血55 ml.术后与术前血红蛋白值比较无明显变化.37例均获11～18个月随访,骨折愈合时间10～15周.轻度髋内翻2例,无切口感染、内固定失效及旋转畸形.按董纪元疗效评定标准,优良率94.6%.[结论]小切口DHS微创技术具有手术时间短、出血少、创伤小、并发症少、康复快的特点,是治疗高龄股骨转子间骨折较理想的方法.     

Reduction mammaplasty by central pedicle flap with short submammary scar

Reduction mammaplasty was performed in 30 patients by combining the central pedicle flap method with the short submammary scar (3-S) technique to avoid the common drawbacks of currently popular dermoglandular procedures. Reduction was accomplished by using perforating vascular branches from the pectoralis major muscle and its fascia supplying the nipple and breast parenchyme instead of the subdermal plexus. The central vascular pedicle supplying the nipple-areola complex was preserved. Only the periphery of the breast parenchyme was resected circumferentially, with the exception of the inferolateral portion, so as not to injure the sensory nerve. The remaining breast parenchyme was preserved in an inverted cone shape. The nipple-areola complex was safely transposed with great freedom, and the amount of resection was accurately adjusted for symmetry. No cases of nipple-areola complex sensory change occurred postoperatively, and lactation is possible because of preservation of the lactiferous ducts. The length of postoperative scars was reduced by using the short submammary scar technique. We believe this combined method is ideal in patients requiring resections ranging from 200 to 600 g per breast with good skin elasticity and moderate degree of ptosis.Presented at the Sixth Asian Pacific Congress of the International Confederation for Plastic and Reconstructive Surgery, in Seoul, Korea, October 1993.     

寰枢椎椎弓根钉固定治疗伸直型齿状突骨折合并寰枢关节半脱位

Objective To explore the clinical outcome of atlantoaxial pedicle screw instrument in treatment of extension-type odontoid fracture combined with aflantoaxial subluxation. Methods From December 2002 to December 2006, seven patients with extension-type odontoid fracture combined with at-lantoaxial subluxation were reduced and fixed with atlantoaxial pedicle screw instrument of Vertex system under general anesthesia. There were five males and two females, at mean age of 39.2 years (range 21-59 years). All odontoid fractures were fresh type Aderson Ⅱ. JOA scores of spinal core function was 8.6-14.9 (average 10.7) preoperatively. The X-ray examination, CT scanning and skull traction were performed in all patients preoperatively. Results There found no severe complications such as injuries of vertebral artery, nerve root and spinal cord postoperatively. All patients obtained complete reduction and healing of the fracture and dislocation. The mean off-bed time was four days (3-6 days) after opera-tion. A follow-up for 12-36 months (average 22 months) in all patients showed that the clinical symptom was improved significantly six months postoperatively and that all screws were in proper position verified by X-ray and CT scanning. All patients obtained solid bony union on radiographs, with no loosing or breakage of instrument. The postoperative JOA scores was 13.5-16.9 (average 15.8). Conclusions Allantoaxial pedicle screw fixation has advantages of intraoperative reduction, reliable fixation and high fusion rate and can be used as an effective method for extension-type odontoid fracture combined with at-lantoaxial subluxation.     

椎弓根螺钉内固定及植骨融合治疗退行性腰椎滑脱的临床疗效评价

目的　评价腰椎管减压、后外侧植骨和椎弓根螺钉内固定治疗退行性腰椎滑脱的临床疗效。方法　 1993年 1月～ 2 0 0 2年 9月对 74例腰椎退行性滑脱的患者行腰椎管减压、后外侧植骨和椎弓根螺钉内固定 ,采用的椎弓根内固定技术包括Dick 8例、Steffee 10例、RF 9例、Socon 2 5例、Tenor 2 0例、Moss Miami 2例。滑脱水平在L4的患者有 4 4例、L3 有 9例、L5有 16例 ,两节水平的滑脱有 5例。Ⅰ°滑脱 37例 ,Ⅱ°31例 ,Ⅲ°6例。患者平均年龄为 5 3.6岁 (30～ 79岁 )。根据手术前、后日本骨科协会 (TDA)评分评价临床症状改善的程度。结果　平均随访时间为 4 4个月 (12～ 10 4个月 ) ,所有患者最后随访的JOA评分中客观症状为 (6 .7± 1.0 )分 ,临床体征为 (4 .7± 1.1)分 ,日常活动为 (11.8± 1.9)分 ,总评分为 (2 3.0± 2 .5 )分。手术前、后的JOA评分比较 ,术后主观症状改善 70 % ,临床体征改善 6 8% ,日常活动改善 77%。根据患者的年龄分为A组 (30～ 39岁 )、B组 (4 0～ 4 9岁 )、C组 (5 0～ 5 9岁 )、D组 (≥ 6 0岁 ) ,以JOA的评分结果 >2 5分定为满意 ,A、B、C、D组的满意率分别为91%、75 %、6 9%、6 1%。结论　椎板减压、后外侧植骨融合和椎弓根螺钉内固定是治疗不稳定腰椎滑脱的一种有效方法 ,临床疗效     

C型臂X线机引导下经皮双侧骶髂拉力螺钉固定治疗骶骨H形骨折

目的探讨骶骨H形骨折可行的治疗方法。方法运用C型臂X线机引导下经皮双侧骶髂拉力螺钉固定治疗骶骨H形骨折15例。结果15例患者均获随访，随访时间7—34个月，骨折临床愈合时间3～5个月，术后均未留下明显行走障碍，下蹲等活动接近正常。结论在C型臂X线机精确引导下，经皮双侧骶髂拉力螺钉固定技术能有效地固定骶骨H形骨折中的垂直骨折，纠正骨盆垂直方向移位，操作简洁安全，疗效可靠。     

闭合复位空心钉治疗中老年股骨颈骨折后股骨头坏死的多元相关研究

目的探讨影响闭合复位空心钉治疗中老年股骨颈骨折后股骨头坏死的相关因素及其多元关系。方法对1999年5月～2004年5月间收治的300例中老年股骨颈骨折患者进行回顾性分析,所有患者均行闭合复位空心钉固定。对随访资料完整的99例患者资料运用SPSS10．0软件进行统计学分析,即对其年龄、性别、骨折类型、复位时间、复位质量、完全负重时间、内固定是否取出及术前是否行牵引等因素进行多因素分析。结果99例患者获平均24．5个月(8～60个月)随访。15例出现股骨头坏死,坏死率为15．2%,发生坏死的时间为术后8～50个月。由复位质量、术前牵引、年龄及年龄×取出内固定构成的多因素组对股骨颈骨折后股骨头坏死的影响最显著。结论闭合复位质量对股骨颈骨折预后的影响程度极大；不良位置的术前牵引可能加重股骨头坏死；年龄在多因素共同影响中的相对危险度不大；Garden分型是判断股骨颈骨折后股骨头坏死的一项重要指标,与骨折复位质量具有相关性,但其并非是多因素共同影响下造成股骨头坏死的危险因素。