Assessment of dental implant surface stability at the nanoscale level

ObjectivesTo study the oxide layer stability of certified dental implants of system "P", made based on TiO₂ alloy with carbon coating. To perform a comparative statistical analysis of the obtained data with the available data for the dental implants of systems "A" and "B".MethodsX-ray microtomography and X-ray fluorescence analysis were used to study soft tissue biopsy specimens. Supernatants were studied by dynamic light scattering and transmission electron microscopy when simulating free emission of nanoscale metal oxide particles from the surface of dental implants as well as when simulating physical loading. A comparative analysis of three parameters of nanoscale particles was performed by statistical data analysis. The surface of the "P" system dental implant with surface treatment was analyzed by scanning electron microscopy.ResultsBoth free emission of nanoscale oxide layer particles and yield of nano- and microscale particles during simulation of physical load were confirmed. Statistically significant differences were noted in a comparative analysis of the size and frequency of occurrence of these particles in the supernatants obtained from the surfaces of three dental implant systems. The elemental composition of the particles and the composition and structure of the "P" system dental implants themselves were analyzed.SignificanceThe developed method of dynamic light scattering can be used to compare the stability of the oxide layer of standardized medical products manufactured on the basis of the TiO₂ alloy.     

糖尿病患者饥饿感中医病机浅识

糖尿病患者饥饿感病机有胃火炽盛、胃强脾弱、脾胃虚弱、瘀热消谷、痰热消谷等。糖尿病初期,痰热、火热之证常见,患者出现多食易饥表现,应考虑痰热消谷、火热消谷,选用白虎汤、玉女煎、消渴方等加减治疗;病程日久,火热伤阴,壮火食气,出现气阴两虚等表现,此时出现多食易饥症状,则需考虑胃强脾弱、脾胃虚弱等病机,采用半夏泻心汤、附子理中丸、参苓白术散等治疗;瘀血贯穿糖尿病始终,故在使用以上方法治疗糖尿病患者消谷易饥效果欠佳时,可考虑瘀热消谷的因素,采用桃核承气汤、白虎汤合桂枝茯苓丸治疗。糖尿病与痰湿关系密切,针对该病机引起的饥饿感,在清热的同时,还应化痰除湿。糖尿病病程日久患者,饥饿感病机复杂,宜"观其脉证,知犯何逆,随证治之"。     

The Dangerous Middle: Situational Awareness and Worker Perception of Beetle Kill

ABSTRACT

Forest workers, including loggers, foresters, and wildland firefighters, are regularly exposed to some of the most fatal occupational environments in the United States. These hazardous work environments may become even more complex and dynamic when subject to bark beetle outbreaks that have resulted in significant tree mortality. The impacts of tree death from bark beetles are significant, with the cumulative 17-year (2000–2016) footprint for bark beetle caused tree mortality estimated at 54 million acres. However, how workers think about and act in these environments is understudied. This study, therefore, approaches the issue of beetle kill and forest worker safety by examining the perspectives or workers themselves. Its contribution is to leverage ethnographic research to provide insights that can generate new research questions, better inform outreach, and ultimately improve worker safety outcomes. The resulting insights show that beetle kill was understood by workers as a hazard that increased the complexity and dynamism of the work environment, making situational awareness both more necessary and more difficult to maintain. While much research about situational awareness focuses on hazardous situations, it is suggested that building adequate situational awareness should also include broader considerations of organizational communication, as well as training and experience considered over the course of entire careers.     

Long term outcomes after bare metal stent implantation

Long term outcome data after BMS implant is not available from the Indian subcontinent. This is a prospective observational study which aims to study long term outcomes after BMS implant at a tertiary care centre. 100 consecutive patients underwent BMS implant and were followed up for 20 years. LAD was the most common vessel involved and different types of BMS were implanted. All-cause mortality was noted in 21% (n = 21) whereas cardiac mortality was seen in 16% (n = 16). Cumulative revascularisation free survival at 20 years was 71%. The study showed that long term outcomes after BMS implant were fare and acceptable.     

No Threshold Exists for Recommending Revision Surgery in Metal-on-Metal Hip Arthroplasty Patients With Adverse Reactions to Metal Debris: A Retrospective Cohort Study of 346 Revisions

BackgroundSurgeons currently have difficulty when managing metal-on-metal hip arthroplasty (MoMHA) patients with adverse reactions to metal debris (ARMD). This stems from a lack of evidence, which is emphasized by the variability in the recommendations proposed by different worldwide regulatory authorities for considering MoMHA revision surgery. We investigated predictors of poor outcomes following MoMHA revision surgery performed for ARMD to help inform the revision threshold and type of reconstruction.MethodsWe retrospectively studied 346 MoMHA revisions for ARMD performed at 2 European centers. Preoperative (metal ions/imaging) and intraoperative (findings, components removed/implanted) factors were used to predict poor outcomes. Poor outcomes were postoperative complications (including re-revision), 90-day mortality, and poor Oxford Hip Score.ResultsPoor outcomes occurred in 38.5%. Shorter time (under 4 years) to revision surgery was the only preoperative predictor of poor outcomes (odds ratio [OR] = 2.12, confidence interval [CI] = 1.00-4.46). Prerevision metal ions and imaging did not influence outcomes. Single-component revisions (vs all-component revisions) increased the risk of poor outcomes (OR = 2.99, CI = 1.50-5.97). Intraoperative modifiable factors reducing the risk of poor outcomes included the posterior approach (OR = 0.22, CI = 0.10-0.49), revision head sizes ≥36 mm (vs <36 mm: OR = 0.37, CI = 0.18-0.77), ceramic-on-polyethylene revision bearings (OR vs ceramic-on-ceramic = 0.30, CI = 0.14-0.66), and metal-on-polyethylene revision bearings (OR vs ceramic-on-ceramic = 0.37, CI = 0.17-0.83).ConclusionNo threshold exists for recommending revision in MoMHA patients with ARMD. However postrevision outcomes were surgeon modifiable. Optimal outcomes may be achieved if surgeons use the posterior approach, revise all MoMHA components, and use ≥36 mm ceramic-on-polyethylene or metal-on-polyethylene articulations.     

林国华针灸治疗难治性突发性耳聋经验撷要

总结林国华教授针灸治疗难治性突发性耳聋经验,并对典型医案进行介绍。林国华教授认为本病多因少阳经气厥塞所致,提倡尽早针灸干预,治病求本,谨守"少阳暴厥"之病机,谨遵"疏解少阳,通耳开窍"之法,临证必用听宫,主取少阳经穴,辅予辨经取穴,巧施发蒙针法与气流灌耳法,妙用岭南火针疗法,必要时调气调神、加取募穴,共奏通耳复聪之效。     

Microstructure and Interfacial Reactions of Resistance Brazed Lap Joints between TC4 Titanium Alloy and 304 Stainless Steel Using Metal Powder Interlayers

In the brazing joint between titanium alloy and stainless steel, a lot of Fe-Ti intermetallic compounds (IMCs) can be easily formed to make joints crack. A lap resistance brazing process with metal powder layers on both sides of the filler metal was used to solve this problem. The microstructure and metallurgical behavior of joints was studied through comparative experiments. The result showed that Nb, V and Cr powders and the solder reacted with the base material to form a new phase, which replaced the Ti-Fe brittle phase in the joint. At the same time, metal powder clusters hindered the diffusion of Ti and Fe elements and improved the distribution of new phases. The established atomic reaction model revealed the metallurgical behavior and formation mechanism of the joints. Therefore, the intervening position of the metal powder layer and the multi-reaction zone structure are the main reasons the shear strength of joints is improved.     

Selective Laser Melting of Al-Based Matrix Composites with Al2O3 Reinforcement: Features and Advantages

Aluminum matrix composites (AMC) are of great interest and importance as high-performance materials with enhanced mechanical properties. Al₂O₃ is a commonly used reinforcement in AMCs fabricated by means of various technological methods, including casting and sintering. Selective laser melting (SLM) is a suitable modern method of the fabrication of net-shape fully dense parts from AMC with alumina. The main results, achievements, and difficulties of SLM applied to AMCs with alumina are discussed in this review and compared with conventional methods. It was shown that the initial powder preparation, namely the particle size distribution, sphericity, and thorough mixing, affected the final microstructure and properties of SLMed materials drastically. The distribution of reinforcing particles tends to consolidate the near-melting pool-edges process because of pushing by the liquid–solid interface during the solidification process that is a common problem of various fabrication methods. The achievement of an homogeneous distribution was shown to be possible through both the thorough mixing of the initial powders and the precise optimization of SLM parameters. The strength of the AMCs fabricated by the SLM method was relatively low compared with materials produced by conventional methods, while for superior relative densities of more than 99%, hardness and tribological properties were obtained, making SLM a promising method for the Al-based matrix composites with Al₂O₃.     

A modality-specific somatosensory evoked potential test protocol for clinical evaluation: A feasibility study

ObjectiveWe aimed to establish an objective neurophysiological test protocol that can be used to assess the somatosensory nervous system.MethodsIn order to assess most fiber subtypes of the somatosensory nervous system, repetitive stimuli of seven different modalities (touch, vibration, pinprick, cold, contact heat, laser, and warmth) were synchronized with the electroencephalogram (EEG) and applied on the cheek and dorsum of the hand and dorsum of the foot in 21 healthy subjects and three polyneuropathy (PNP) patients. Latencies and amplitudes of the modalities were assessed and compared. Patients received quantitative sensory testing (QST) as reference.ResultsWe found reproducible evoked potentials recordings for touch, vibration, pinprick, contact-heat, and laser stimuli. The recording of warm-evoked potentials was challenging in young healthy subjects and not applicable in patients. Latencies were shortest within Aβ-fiber-mediated signals and longest within C-fibers. The test protocol detected function loss within the Aβ-fiber and Aδ-fiber-range in PNP patients. This function loss corresponded with QST findings.ConclusionIn this pilot study, we developed a neurophysiological test protocol that can specifically assess most of the somatosensory modalities. Despite technical challenges, initial patient data appear promising regarding a possible future clinical application.SignificanceEstablished and custom-made stimulators were combined to assess different fiber subtypes of the somatosensory nervous system using modality-specific evoked potentials.