Ventilatory support in the intensive care unit

This article focuses on the functional features of positive-pressure ventilators, the modes of invasive and non-invasive mechanical ventilation, and the main ventilator settings. It also highlights the potential complications of mechanical ventilation, the basic principles of weaning, and the pathophysiological basis of patient-ventilator dyssynchrony.     

运动学对线应用于全膝关节置换术的研究进展

全膝关节置换术是目前治疗终末期膝关节骨性关节炎最有效的方法之一，全膝关节置换术后膝关节功能、术后膝关节疼痛与术后下肢力线有着密切的关系。目前膝关节置换术下肢对线方式主要采用机械力学对线方法，该方法可以改善膝关节功能，但是有部分患者也会产生术后膝关节的疼痛、活动受限等并发症，导致术后患者满意度较差。近些年越来越多的研究开始关注运动力学对线技术并应用于临床。运动学对线技术旨在重建患者的解剖结构，将膝关节假体运动轴与膝关节生理性运动轴保持一致，减少膝关节周围软组织和韧带的松解，实现膝关节生理性运动。该文就运动力学对线方法在全膝关节置换术中的应用进展作一综述。     

右美托咪啶与芬太尼联合对ICU 腹部外科术后机械通气患者镇静镇痛的效果比较

目的:探讨右美托咪啶与芬太尼联合在ICU腹部外科术后机械通气患者中的应用效果及对镇静、镇痛作用的影响。方法:选择2018年5月—2019年6月ICU腹部外科术后机械通气患者62例,随机分为对照组(n=31例)和观察组(n=31例)。两组均采用芬太尼持续静脉泵入,对照组采用咪达唑仑镇静镇痛,观察组采用右美托咪啶镇静镇痛,比较两组镇痛镇静效果、镇静剂使用剂量、苏醒及达到镇静所需时间、血流动力学水平及安全性。结果:两组T2、T3时间点VAS评分分别为(2.40±0.31 vs 2.43±0.32和2.01±0.12 vs 2.05±0.15)、Ramsay量表评分分别(3.21±0.35 vs 3.20±0.33和3.01±0.25vs 3.00±0.24)均低于T1时间点(VAS评分2.94±0.69 vs 2.96±0.71;Ramsay量表评分3.57±0.61 vs 3.58±0.62)(P0.05);观察组右美托咪啶联合芬太尼镇痛镇静达到镇静所需时间(34.29±3.56) min长于对照组(23.63±3.21)(t=5.535,P=0.043);观察组镇静剂使用剂量(220.59±15.25)μg、苏醒时间(3.29±0.69)min均少(短)于对照组镇静剂使用剂量(386.44±18.92)μg、苏醒时间(7.56±1.21)min(t=6.294、6.092,P=0.023、0.025);两组T1、T2时间点心率[观察组T1(88.47±9.76)次/min、T2(86.41±9.43)次/min;对照组T1(89.53±10.41)次/min、T2(87.46±9.58)次/min]均高于T0时间点[观察组(78.78±4.35)次/min、对照组(79.12±4.41)次/min](P0.05);观察组T1、T2时间点MVP(79.58±5.71、87.53±6.76)mmHg高于对照组(74.12±4.69、75.26±5.61)mmHg(t=9.613、7.223,P=0.011、0.016);观察组的不良反应发生率为6.45%,与对照组的12.90%差异无统计学意义(χ~2=1.214, P=0.643)。结论:将右美托咪啶联合芬太尼用于ICU腹部外科术后机械通气患者中能获得良好的镇痛、镇静效果,缩短苏醒及达到镇静所需时间,血流动力学相对稳定,药物安全性较高,值得推广应用。     

A modality-specific somatosensory evoked potential test protocol for clinical evaluation: A feasibility study

ObjectiveWe aimed to establish an objective neurophysiological test protocol that can be used to assess the somatosensory nervous system.MethodsIn order to assess most fiber subtypes of the somatosensory nervous system, repetitive stimuli of seven different modalities (touch, vibration, pinprick, cold, contact heat, laser, and warmth) were synchronized with the electroencephalogram (EEG) and applied on the cheek and dorsum of the hand and dorsum of the foot in 21 healthy subjects and three polyneuropathy (PNP) patients. Latencies and amplitudes of the modalities were assessed and compared. Patients received quantitative sensory testing (QST) as reference.ResultsWe found reproducible evoked potentials recordings for touch, vibration, pinprick, contact-heat, and laser stimuli. The recording of warm-evoked potentials was challenging in young healthy subjects and not applicable in patients. Latencies were shortest within Aβ-fiber-mediated signals and longest within C-fibers. The test protocol detected function loss within the Aβ-fiber and Aδ-fiber-range in PNP patients. This function loss corresponded with QST findings.ConclusionIn this pilot study, we developed a neurophysiological test protocol that can specifically assess most of the somatosensory modalities. Despite technical challenges, initial patient data appear promising regarding a possible future clinical application.SignificanceEstablished and custom-made stimulators were combined to assess different fiber subtypes of the somatosensory nervous system using modality-specific evoked potentials.     

Topically injected adrenocorticotropic hormone induces mechanical hypersensitivity on a full‐thickness cutaneous wound model in rats

Cutaneous wound pain causes physical and psychological stress for patients with wounds. Previous studies reported that stress induces hyperalgesia and deteriorates wound healing. However, the effect of the stress response such as in hypothalamic‐pituitary‐adrenal (HPA) axis on local wound area is unclear. We aimed to investigate the effects of a stress response on the mechanical withdrawal threshold in the local wound area and describe the identification of a wound pain exacerbation. We topically injected adrenocorticotropic hormone (ACTH) into the granulation tissue of full‐thickness cutaneous wound model rats on the fifth day postwounding and measured the mechanical withdrawal thresholds, cytochrome P450 2Bs levels and concentration of 5,6‐epoxyeicosatrienoic acid in wound exudate. We found that ACTH induced mechanical hypersensitivity at 4 and 6 hours after injection (P = .004 and .021, respectively), and increased gene expression of cytochrome P450 2B12 expression (P = .046). Concentration of 5,6‐EET in the wound exudate was moderately correlated with the mechanical withdrawal threshold (r = ?.630). Finally, the mechanical withdrawal threshold in the 5,6‐EET group was significantly lower than that in the control group at 2 hours after the injection (P = .015). We propose that 5,6‐EET is one of the most promising contributors to the wound pain exacerbation. These findings could guide clinical wound and pain management.     

Exploration of D022-Type Al3TM(TM = Sc,Ti, V,Zr, Nb,Hf, Ta): Elastic Anisotropy,Electronic Structures,Work Function and Experimental Design

The structural properties, elastic anisotropy, electronic structures and work function of D0₂₂-type Al₃TM (TM = Sc, Ti, V, Y, Zr, Nb, La, Hf, Ta) are studied using the first-principles calculations. The results indicate that the obtained formation enthalpy and cohesive energy of these compounds are in accordance with the other calculated values. It is found that the Al₃Zr is the most thermodynamic stable compound. The mechanical property indexes, such as elastic constants, bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, and Vickers hardness are systematically explored. Moreover, the calculated universal anisotropic index, percent anisotropy and shear anisotropic factors of D0₂₂-type Al₃TM are analyzed carefully. It demonstrates that the shear modulus anisotropy of Al₃La is the strongest, while that of Al₃Ta is the weakest. In particular, the density of states at Fermi level is not zero, suggesting that these phases have metal properties and electrical conductivity. More importantly, the mechanisms of correlation between hardness and Young’s modulus are further explained by the work function. Finally, the experimental design proves that D0₂₂-Al₃Ta has an excellent strengthening effect.     

High-magnitude mechanical strain inhibits the differentiation of bone-forming rat calvarial progenitor cells

Purpose: Orthodontic tooth movement occurs during the bone remodeling induced by therapeutic mechanical strain. It is important to investigate the relation between the strength of mechanical stress and bone formation activity. The aim of this study was to determine the effect of high-magnitude mechanical strain on bone formation in detail.

Materials and methods: Osteoblast-like cells isolated from fetal rat calvariae were loaded with 18% cyclic tension force (TF) for 48?h. To phenotypically investigate the effect of TF, we measured the number and the size of bone nodules stained by von Kossa technique on day 21 after cell seeding and determined the calcium content of bone nodules on day 14. Furthermore, we examined the gene expression of BMP-2, Runx2 and Msx2, which are important factors for bone nodule formation, on days 1, 4 and 7 after TF loading.

Results: The maximum bone nodule size in the control group was 1620 and 719?μm in the TF group. Furthermore, the mean number of bone nodules sized over 360?μm in the TF group was significantly decreased compared to the control group. The calcium content was also significantly decreased to 42% by TF loading. The mRNA expression of BMP-2, Runx2 and Msx2 was decreased 1 and 4 days after TF loading.

Conclusion: The differentiation of bone forming progenitor cells into bone nodule forming cells was inhibited by TF due to the decreased expression of bone formation related factors such as BMP-2, Runx2 and Msx2.     

No Correlation Between Clinical Outcomes and Changes in the Tibia-Metaphyseal Angle Following Total Knee Arthroplasty: A Retrospective Study

BackgroundDespite numerous advances in the implant design and surgical technique, improvement in patient satisfaction following total knee arthroplasty (TKA) has plateaued. Various TKA alignment strategies have been introduced that impact the coronal positioning of the tibial component relative to the native joint line. This study aims to analyze if postoperative variance of the joint line from preoperative native alignment is correlated with changes in patient-reported outcomes following primary TKA.MethodsA retrospective review of an academic center’s patient population identified all primary TKAs between 2013 and 2021 with full-length, standing radiographs and patient-reported outcome measures (PROMs) data. These measures included the Knee injury and Osteoarthritis Outcome Score for Joint Replacement, Patient-Reported Outcome Measurement Information System, and Veterans RAND 12 scores. Preoperative and postoperative radiographic measurements for hip-knee angle, tibia-metaphyseal angle, tibial-axis orientation angle, and joint-line obliquity angle were recorded. Three-month, 1-year, and 2-year PROM scores were correlated with the change in degrees for each of the angles using a Spearman’s correlation. A Mann-Whitney U-test was used to compare angular changes with a change in PROM scores.ResultsOne hundred and ninety nine patients (204 knees) with a mean age of 67 years were included. Average follow-up was 23 months. Three-month, 1-year, and 2-year follow-up rates were 93%, 64%, and 34%, respectively. Improvements were seen across all PROMs regardless of an angular change.ConclusionThere were no clear correlations between PROMs and variation in joint line obliquity in the coronal plane. These data suggest that the magnitude of the variation in coronal tibial alignment from native alignment does not impact PROMs. Further study is indicated to correlate an angular change with functional measures.