脾脏ARFI弹性联合血小板计数预测乙肝肝硬化食管静脉曲张的价值

目的 本研究应用声辐射力脉冲成像(Acoustic Radiation Force Impulse ARFI)技术对慢性乙型肝炎肝硬化患者进行脾脏弹性检测和分析,探讨和对比脾脏ARFI弹性及脾脏ARFI弹性联合血小板计数(Platelet Count PC)在预测乙肝肝硬化食道静脉曲张的临床应用价值。方法 对232例慢性乙型肝炎肝硬化患者应用ARFI技术检测脾脏实时超声弹性,并测量PC,所有患者均于检测前后一周内行胃镜检查明确食管静脉曲张情况,以胃镜结果为金标准,应用受试者工作特征(receiver operating characteristic, ROC)曲线比较脾脏ARFI弹性、PC、及脾ARFI弹性联合PC诊断肝硬化食管静脉曲张的临床价值。结果 食道静脉曲张组脾脏ARFI弹性和PC分别为3.52(3.16-3.87)m/s 和62(41-88.25),无食道静脉曲张组脾脏ARFI弹性和PC分别为2.91(2.35-3.35)m/s和129.5(87.25-196.25)。脾脏ARFI弹性和PC在两组间比较的差异均具有统计学意义(P＜0.001 )。单独脾脏ARFI弹性及脾脏ARFI弹性联合PC的ROC曲线下面积分别为0.76和0.83,差异具有统计学意义(P = 0.0021)。结论 脾脏ARFI弹性测值联合PC较单纯脾脏ARFI弹性能更准确的无创预测慢性乙型肝炎肝硬化食管静脉曲张的存在,具有良好的临床应用前景。     

Clinical course of masticatory function recovery following arthrocentesis in patients with unilateral mandibular condyle head fracture

The aim of this study was to investigate the clinical course of masticatory function recovery following arthrocentesis. Patients with a unilateral condylar head fracture who underwent arthrocentesis for therapeutic reasons were evaluated and compared with patients with a unilateral condylar head fracture who did not undergo arthrocentesis. At 3 months after treatment, the occlusal contact area and maximum bite force in patients with a fracture treated with arthrocentesis were greater than in those who did not receive arthrocentesis at the same time points, although the differences were not significant. Moreover, at 1 and 3 months following arthrocentesis, mean (±SD) occlusal contact area (1 month: 1.99 ± 0.55 mm², p = 0.01; 3 months: 2.90 ± 1.36 mm², p = 0.03) and maximum bite force (1 month: 82.45 ± 15.04 N, p = 0.01; 3 months: 101.11 ± 14.53 N, p = 0.01) on the fractured side in patients who underwent that treatment were significantly reduced when compared with those on the non-fractured side. The authors conclude that if the priority is to avoid open reduction and internal fixation, then the arthrocentesis approach might be a less invasive alternative, albeit with the price of a prolonged healing interval.     

Analysis of landing performance and ankle injury in elite British artistic gymnastics using a modified drop land task: A longitudinal observational study

ObjectivesTo determine whether differences in landing force and asymmetry of landing force exist between gymnasts at the time of data collection versus those that subsequently experienced an ankle injury 12-months later.Study designProspective longitudinal observational design with baseline measures and 12 month follow up.SettingBritish Gymnastics National Training Centre.ParticipantsThirty-two asymptomatic elite level gymnasts from three artistic gymnastic squads (n = 15 senior female, n = 10 junior female and n = 7 senior male).Main outcome measuresA modified drop land task was used to quantify measures of landing performance. Peak Vertical Ground Reaction Force (PVGRF) was used to measure landing force. The level of inter-limb asymmetry of landing force was calculated using the Limb Symmetry index (LSI). Other measures included injury incidence and percentage coefficient of variation (% CV).ResultsThere was no statistical difference for landing force (p = 0.481) and asymmetry of landing force (p = 0.698) when comparing injured and non-injured gymnasts. Most participants (69%) demonstrated inter-limb asymmetry of landing forces.ConclusionsOur findings observed inter-limb asymmetry of landing force in injured gymnasts, although uninjured gymnasts also exhibited asymmetry of landing force. Both magnitude of landing force and inter-limb asymmetries of landing force failed to identify the risk of ankle injury.     

New evidence supporting lung cancer screening with low dose CT & surgical implications

IntroductionLung cancer is the leading cause of cancer-death worldwide. The U.S. Preventative Services Task Force (USPTSF) approved screening for current or former smokers aged 55–80 based on the results of the National Lung Screening trial (NLST). Following the NLST, new evidence has emerged from clinical trials and updates to previous trials prior to the anticipated update to the USPSTF guideline. We review the new evidence on lung cancer screening with low dose computed tomography (LDCT) and the surgical implications.MethodsA review of new literature was performed pertaining to lung cancer screening since implementation of UPSTF guidelines. Articles for inclusion were identified by both authors’, then search of the Pubmed and Cochrane database was performed from January 1st, 2013 through February 4th, 2020 using the MeSH search terms: “lung cancer”; “screening”; “low dose CT”. The results of these studies are summarized.ResultsWe identified multiple prospective randomized control trials and meta-analysis since the NLST supporting lung cancer-specific mortality with screening. We identified new nodule classification systems and the development of risk-models which may reduce false positive rates and identify high risk patients not currently eligible for screening. Finally, we discussed the surgical implications of screening.ConclusionNew data supports NLST findings and show ongoing benefit to LDCT for lung cancer screening. Standardized LDCT screening classification has been shown to reduce harm and lower false positive rates. Further study is needed regarding use of risk-modeling. Screening will require an increase in the thoracic workforce to accommodate the amount of surgically operable cancers.     

The relationship between tibiofemoral geometry and musculoskeletal function during normal activity

BackgroundThe effect of tibiofemoral geometry on musculoskeletal function is important to movement biomechanics.Research questionWe hypothesised that tibiofemoral geometry determines tibiofemoral motion and musculoskeletal function. We then aimed at 1) modelling tibiofemoral motion during normal activity as a function of tibiofemoral geometry in healthy adults; and 2) quantifying the effect of tibiofemoral geometry on musculoskeletal function.MethodsWe used motion data for six activity types and CT images of the knee from 12 healthy adults. Geometrical variation of the tibia and femoral articular surfaces were measured in the CT images. The geometry-based tibiofemoral motion was calculated by fitting a parallel mechanism to geometrical variation in the cohort. Matched musculoskeletal models embedding the geometry-based tibiofemoral joint motion and a common generic tibiofemoral motion of reference were generated and used to calculate joint angles, net joint moments, muscle and joint forces for the six activities analysed. The tibiofemoral model was validated against bi-planar fluoroscopy measurements for walking for all the six planes of motion. The effect of tibiofemoral geometry on musculoskeletal function was the difference between the geometry-based model and the model of reference.ResultsThe geometry-based tibiofemoral motion described the pattern and the variation during walking for all six motion components, except the pattern of anterior tibial translation. Tibiofemoral geometry had moderate effect on cohort-averages of musculoskeletal function (R² = 0.60–1), although its effect was high in specific instances of the model, outputs and activities analysed, reaching 2.94 BW for the ankle reaction force during stair descent. In conclusion, tibiofemoral geometry is a major determinant of tibiofemoral motion during walking.SignificanceGeometrical variations of the tibiofemoral joint are important for studying musculoskeletal function during normal activity in specific individuals but not for studying cohort averages of musculoskeletal function. This finding expands current knowledge of movement biomechanics.     

Internal porosities,retentive force,and survival of cobalt–chromium alloy clasps fabricated by selective laser-sintering

PurposeThe purpose of this study was to evaluate internal porosities, retentive force values and survival of cobalt–chromium (Co–Cr) alloy clasps fabricated by direct metal laser-sintering (DMLS) and compare them to conventionally cast clasps.MethodsEmbrasure clasps were digitally designed fitting teeth 35 and 36 on identical metal models (N = 32). Sixteen clasps were fabricated using DMLS (group DMLS) and another sixteen clasps were additively manufactured from wax and then cast from a Co–Cr alloy (group CAST). Internal porosities were examined using micro-focus X-ray (micro-CT) and analyzed applying Kolmogorov–Smirnov test, Mann–Whitney test, and T test (significance level: p < 0.050). A universal testing machine was used to determine the retentive force values at baseline and after 1095, 5475, 10,950 and 65,000 cycles of simulated aging. Data were analyzed employing Kolmogorov–Smirnov test, one-way ANOVA, and Scheffé’s post-hoc test (significance level: p < 0.050). Survival was estimated for 65,000 cycles of artificial aging using Kaplan–Meier analysis.ResultsMicro-CT analysis revealed a higher prevalence (p < 0.001), but a more homogeneous size and a significantly smaller mean (p = 0.009) and total volume (p < 0.001) of internal porosities for group DMLS. The groups showed mean initial retentive force values of 13.57 N (CAST) and 15.74 N (DMLS), which significantly declined over aging for group CAST (p = 0.003), but not for group DMLS (p = 0.107). Survival was considerably higher for group DMLS (93.8%) than for group CAST (43.8%) after 65,000 cycles of aging.ConclusionsClasps made by laser-sintering could be an alternative to conventional cast clasps for the fabrication of removable partial denture frameworks.     

多力视角下社会资本参与基层卫生服务的动力机制及优化策略研究

社会办医作为我国基层卫生服务的重要组成部分,可以弥补基层卫生机构发展总量与质量不足等问题,对于推进整个基层卫生服务高质量发展也是有着重大裨益。文章从物理学的"力"出发,运用支持力,推力,引力,阻力,摩擦力五种"力"探讨社会资本参与基层卫生服务的动力形成机制,并构建动力斜坡图,针对存在问题,提出加大支持力和引力,合理利用推力,减少摩擦力,消除阻力等优化建议,以期助力社会资本参与基层卫生服务建设平稳进行。