Selective coating of cylindrical matrices with a central hole. I. An interpretation of the swelling process

Cylindrical matrices were prepared by compression either of polyvinyl alcohol 100000 or mixtures of the excipient and a drug (sodium salicylate or theophylline). To modify the cylindrical shape, a hole was bored in the centre of the flat surface through both sides of the matrices. Different swellable systems were obtained applying an impermeable coating to one, two or three surfaces of the perforated matrices. The swelling of the perforated matrices was modified according to the number and the position of the coated surfaces (selective coating) and the loaded drug. Pseudo-zero order kinetics were obtained when the interior hole was the only uncoated surface.     

The nature of breast dense core granules: uranaffin reactivity

In this study breast tissue that contained ultrastructural dense core granules has been examined from 24 patients. The possible neuroendocrine characteristics of the granules were studied using the uranaffin reaction and an ultrastructural argyrophil stain. The tissue included 15 breast carcinomas and nine benign samples. Two types of breast dense core granules can be distinguished on the basis of intracellular distribution patterns and histochemical reactivity. Type I dense core granules are the most common and they were found subluminally distributed in non-pathological tissues and benign lesions as well as carcinomas. They were uranaffin-negative and are unlikely to be of endocrine nature. Type II dense core granules were found only in four carcinomas, where they occurred abundantly throughout the cytoplasm. These granules were uranaffin-positive and argyrophilic and thus exhibited characteristics consistent with neuroendocrine structure.     

社会主义本质论教学探讨

社会主义本质论本身比较抽象,加上现实与理论存在着较大差距,学生思想认识问题较多,使得社会主义本质论的教学难以得取得实效。针对这一实际,提出了从历史和现实2个方面激发学生的学习兴趣,用"定义法"和"比较法"讲清"什么是社会主义",从理论和实践两个层面解决学生思想认识问题的教学策略,为提高教学实效探索了一条有效途径。     

Heparin–coated circuit during cardiopulmonary bypass

A prospective randomized study was performed to investigate the effect of surface coating with covalently endpoint–attached heparin (Carmeda Bio Active Surface) and reduced general heparinization on haematological indices and complement C5 activation. Care was taken to optimize the rheological design of the system using centrifugal pump and a closed system without venting or machine suction. Twenty patients scheduled for aortocoronary bypass grafting (EF > 0.5) participated in the study. Ten patients were randomized to be treated with heparin–coated equipment (CBAS) and reduced i.v. heparin (1.5 mg kg^-1) while 10 patients treated with identical but noncoated equipment and full heparinization (3 mg–kg^-1) served in a Control group. A vacuum suction was used to collect the blood from the operating field and it was autotransfused at weaning from extracorporeal circulation (ECC). Blood samples were obtained from the venous (precircuit) and arterial (postcircuit) side. We used a new and very specific method for detection of C5a based on monoclonal antibodies. The concentration of C5a was low in both groups during the operation but a significant increase was seen on days 1 and 2. In the Control group there was an increase from 10.2 ngml^-1±1.2 to 27.5 ng ml^-1 ± 4.8 on day 2 and in the CBAS group from 10.7 ng ml^-1 ± 1.2 to 35.6 ng ml^-1 ± 11.6 on day 2 (NS between groups). The granulocytes and total leukocyte count increased at the end of ECC and was maintained at the elevated level throughout the study period. The amount of free haemoglobin was high in the autotransfused blood in both groups. The present results confirm the feasibility of reducing general heparin when using heparin–coated systems but the study does not support the superiority of such coating with regard to biocompatibility in short procedures with a Theologically optimized circuit. The potential benefit from reduced heparin and protamine has not been fully evaluated.     

聚甲氧基硅氧烷及其功能化产物研究Ⅱ.分子结构表征

通过正硅酸甲酯(TMOS)的水解缩合反应制备了聚甲氧基硅氧烷(PMOS)，其分子式可表示为：[SiOa(OH)b(OCH3)c]n。用丙烯酸-2-羟乙酯(HEA)进行酯交换后，制的功能化产物聚丙烯酰氧基甲基硅氧：烷(PAMOS)，其分子式可表示为：[SiOd(OH)c(OCH3)f(OCH2CH2OCOCH=CH2)g]k。通过二氧化硅分析、红外光谱(FTIR)、凝胶渗透色谱(GPC)等方法确定了分子式中a、b、c、n及d、e、f、g、k的值，是一种比较方便、快捷且准确的方法。     

Effect of surface conditioning methods on the bond strength of luting cement to ceramics

OBJECTIVES: This study evaluated the effect of three different surface conditioning methods on the bond strength of a Bis-GMA based luting cement to six commercial dental ceramics. METHODS: Six disc shaped ceramic specimens (glass ceramics, glass infiltrated alumina, glass infiltrated zirconium dioxide reinforced alumina) were used for each test group yielding a total number of 216 specimens. The specimens in each group were randomly assigned to one of the each following treatment conditions: (1) hydrofluoric acid etching, (2) airborne particle abrasion, (3) tribochemical silica coating. The resin composite luting cement was bonded to the conditioned and silanized ceramics using polyethylene molds. All specimens were tested at dry and thermocycled (6.000, 5-55 degrees C, 30 s) conditions. The shear bond strength of luting cement to ceramics was measured in a universal testing machine (1 mm/min). RESULTS: In dry conditions, acid etched glass ceramics exhibited significantly higher results (26.4-29.4 MPa) than those of glass infiltrated alumina ceramics (5.3-18.1 MPa) or zirconium dioxide (8.1 MPa) (ANOVA, P<0.001). Silica coating with silanization increased the bond strength significantly for high-alumina ceramics (8.5-21.8 MPa) and glass infiltrated zirconium dioxide ceramic (17.4 MPa) compared to that of airborne particle abrasion (ANOVA, P<0.001). Thermocycling decreased the bond strengths significantly after all of the conditioning methods tested. SIGNIFICANCE: Bond strengths of the luting cement tested on the dental ceramics following surface conditioning methods varied in accordance with the ceramic types. Hydrofluoric acid gel was effective mostly on the ceramics having glassy matrix in their structures. Roughening the ceramic surfaces with air particle abrasion provided higher bond strengths for high-alumina ceramics and the values increased more significantly after silica coating/silanization.     

膨胀型聚氨酯防火涂料阻燃机理的研究

用自制的新型成炭剂和聚磷酸铵复配作为聚氨酯防火涂料的阻燃体系。采用热失重分析、扫描电镜、红外光谱和元素分析等手段对膨胀型聚氨酯防火涂料的阻燃机理进行了较为深入的研究．     

Vascular PET Prostheses Surface Modification with Cyclodextrin Coating: Development of a New Drug Delivery System

PURPOSE: Cyclodextrins (CDs) are torus shaped cyclic oligosaccharides with a hydrophobic internal cavity and a hydrophilic external surface. We performed and analysed an antibiotic binding on Dacron (polyethyleneterephtalate, PET) vascular grafts, previously coated with CDs based polymers. METHODS: The CDs coating process was based on the pad-dry-cure method patented in our laboratory. The Dacron prostheses were immersed into a solution containing a polycarboxylic acid, a cyclodextrin and a catalyst, and placed into a thermofixation oven before impregnation with an antibiotic solution (Vancomycin). Biocompatibility tests were performed with L132 human epithelial cells. The antibiotic release in an aqueous medium was assessed by batch type experiments using UV spectroscopy. RESULTS: Viability tests confirmed that the CDs polymers coating the Dacron fibers were not toxic towards L132 cell. Cell proliferation was similar on coated and uncoated grafts. A linear release of Vancomycin was observed over 50 days. CONCLUSION: Our results demonstrate the feasibility of coating CDs onto vascular Dacron grafts. Biological tests show no toxicity of the different cyclodextrins coated. A linear release of antibiotics was depicted over 50 days, demonstrating that cyclodextrin grafting was an efficient drug delivery system.