Packed red blood cell transfusion (PRBC) attenuates intestinal blood flow responses to feedings in pre-term neonates with normalization at 24 hours

Objective: To determine whether packed red blood cell (PRBC) transfusion affects post-prandial superior mesenteric artery blood flow velocities (SMA BFVs) in very-low birth weight (VLBW) neonates and if so, at what time point after transfusion restoration of previous SMA BFV patterns occurs.

Design/Methods: VLBW pre-term neonates, older than 14 days and tolerating bolus enteral feedings administered every 3?h were enrolled in this prospective observational study. Pulsed Doppler ultrasound was used to measure pre- and post-prandial (at 45?min) time-averaged mean, peak and end diastolic velocities (TAMV, PSV, EDV) immediately before and after 15?ml/kg of PRBC transfusion was given over 3?h; patent ductus arteriosus (PDA) status was also evaluated. Subsequent pre- and post-prandial SMA BFVs were recorded 24 and 48?h after the transfusion.

Results: Pre- and post-prandial measurements were obtained for 21 out of 25 enrolled infants. Post-prandial SMA BFVs were attenuated during the feedings immediately after transfusion; at 24 and 48?h after transfusion, changes in post-prandial SMA BFVs were similar to those measured prior to transfusion; the presence of the PDA did not affect results.

Conclusions: PRBC transfusion blunted SMA BFV responses to feedings immediately after the transfusion with normalization observed 24?h post-transfusion.     

Prostatic Artery Embolization—Anatomic Predictors of Technical Outcomes

PurposeTo determine if cone-beam CT and digital subtraction angiography analysis of pelvic arterial anatomy has predictive value for radiation exposure and technical success of prostatic artery embolization (PAE).Materials and MethodsThis prospective, nonrandomized, single-center study included 104 consecutive patients with lower urinary tract symptoms secondary to benign prostatic hyperplasia. Cone-beam CT was performed in 160/208 (76.9%) hemipelves to determine prostatic artery (PA) origin. Classification of pelvic arterial tortuosity was possible in 73/104 (70.2%) patients. Learning curves of 2 interventionalists who performed 86.5% of PAEs were analyzed.ResultsTortuosity of pelvic arteries was classified as mild in 25 (34.2%) patients median age 64 years, moderate in 40 (54.8%) patients median age 69 years, and severe in 8 (11.0%) patients median age 70 years (mild vs moderate, P = .002; mild vs severe, P = .019); median fluoroscopy times were 24, 36, and 46 minutes (P = .008, P = .023); median contrast volumes were 105, 122.5, and 142 mL (P = .029, P = .064); and bilateral PAE rates were 84.0%, 77.5%, and 62.5% (P = .437), respectively. PA origin from superior vesical artery was most frequent (27.5%) and showed higher dose area product (median 402.4 vs 218 Gy ∙ cm², P = .033) and fluoroscopy time (median 42.5 vs 27 min, P = .01) compared with PA origin from obturator artery, which was least frequent. Interventionalist experience revealed significant impact on procedure times (median 159 vs 130 min, P = .006).ConclusionsTortuosity of pelvic arteries was more frequent in older patients and predicted worse technical outcomes of PAE. PA origin from obturator artery was associated with lower dose area product and fluoroscopy time, especially compared with PA origin from superior vesical artery. Interventionalist experience showed significant influence on technical outcome.     

Perfusion pressure flow study in the upper urinary tract

Hydronephrosis with an undetermined pathology is a common condition detected in imaging studies. In urological clinical practice, it is a persistent dilemma to predict whether this condition will progress to result in the deterioration of renal function. Perfusion pressure flow study of the upper urinary tract, known as the Whitaker test, provides an alternative diagnostic tool for solving this condition. Perfusion pressure flow study has been criticized for its invasiveness, nonphysiological approach, and inconsistency in predicting outcomes. However, it continues to be used to evaluate difficult or equivocal cases and to provide an objective assessment of the upper urinary tract.     

经鼻导管高流量吸氧与经鼻气道正压通气在重症毛细支气管炎呼吸支持中的应用价值比较

目的：比较经鼻导管高流量吸氧（HFNC）与经鼻气道正压通气（nCPAP）在重症毛细支气管炎呼吸支持中的应用价值，为临床治疗方案的选择提供参考。方法：选取2016年12月至2018年12月我院儿科收治的重症毛细支气管炎患儿90例，采用随机数字表法分为观察组和对照组各45例。两组患儿入院后均给予常规综合治疗以保证呼吸道通畅，在此基础上观察组采用HFNC治疗，对照组采用nCPAP治疗，比较两组患儿治疗前和治疗24 h后呼吸频率、经皮血氧饱和度（TcSO2）、呼吸窘迫评分体系（CSS）评分、动脉血氧分压（PaO2）等呼吸相关指标及治疗前后临床症状体征改善情况。结果：两组患儿治疗24 h后呼吸频率、CSS评分均降低，且观察组降低程度更大，TcSO2、PaO2于治疗24 h后升高，观察组升高幅度较对照组明显；治疗后两组患儿咳嗽及肺部湿啰音、肺部炎症情况均改善，观察组症状体征消失时间早于对照组，差异均有统计学意义（P<0.05）。结论：重症毛细支气管炎患儿采用HFNC治疗可明显改善通气功能和临床症状，治疗效果优于nCPAP治疗，可扩大样本量进一步观察。     

Analysis of arterial hypertension pharmacotherapy in patients with obstructive sleep apnea syndrome

IntroductionObstructive sleep apnea (OSA) is often connected with arterial hypertension and it could also be a cause of secondary hypertension. Treatment of arterial hypertension and optimal blood pressure level are important for prevention of cardiovascular complications. It is not well known how to treat patients with OSA and arterial hypertension. Also many patients with OSA suffer from metabolic syndrome which worsen their prognosis.AimThe aim of our study was to assess arterial hypertension compensation in patients with metabolic syndrome and moderate to severe OSA and to analyze used pharmacotherapy.Materials and methods85 hypertensive patients (75 men) with metabolic syndrome, average age 53.6 ± 9.3 years, were evaluated using overnight sleep study with diagnosis of OSA, average apnea–hypopnea index (AHI) 56.3 ± 23. Patients underwent 24 h ambulatory blood pressure monitoring (ABPM) and their current pharmacotherapy data were obtained. Appropriate combinations of antihypertensive drugs (patients with metabolic syndrome) were derived from ESH/ESC 2013 guidelines.ResultsArterial hypertension was well compensated in only 11.8% of the patients. 24.7% patients were treated according to current guidelines. Fisher's exact test with analysis of adjusted residues has found higher rate of blood pressure subcompensation in patients treated with triple+ combination of drugs (p = 0.035, 51.4% vs 10%).ConclusionOnly a small number of patients had optimal blood pressure level and were treated according to current ESH/ESC guidelines. We have to constantly appeal to all physicians to perform ABPM in patients with OSA.     

In Vitro-In Vivo Extrapolation and Hepatic Clearance-Dependent Underprediction

Accurately predicting the hepatic clearance of compounds using in vitro to in vivo extrapolation (IVIVE) is crucial within the pharmaceutical industry. However, several groups have recently highlighted the serious error in the process. Although empirical or regression-based scaling factors may be used to mitigate the common underprediction, they provide unsatisfying solutions because the reasoning behind the underlying error has yet to be determined. One previously noted trend was intrinsic clearance-dependent underprediction, highlighting the limitations of current in vitro systems. When applying these generated in vitro intrinsic clearance values during drug development and making first-in-human dose predictions for new chemical entities though, hepatic clearance is the parameter that must be estimated using a model of hepatic disposition, such as the well-stirred model. Here, we examine error across hepatic clearance ranges and find a similar hepatic clearance-dependent trend, with high clearance compounds not predicted to be so, demonstrating another gap in the field.     

Ultrasound-Assist Extrusion Methods for the Fabrication of Polymer Nanocomposites Based on Polypropylene/Multi-Wall Carbon Nanotubes

Isotactic polypropylenes (iPP) with different melt flow indexes (MFI) were used to fabricate nanocomposites (NCs) with 10 wt % loadings of multi-wall carbon nanotubes (MWCNTs) using ultrasound-assisted extrusion methods to determine their effect on the morphology, melt flow, and electrical properties of the NCs. Three different types of iPPs were used with MFIs of 2.5, 34 and 1200 g/10 min. Four different NC fabrication methods based on melt extrusion were used. In the first method melt extrusion fabrication without ultrasound assistance was used. In the second and third methods, an ultrasound probe attached to a hot chamber located at the exit of the die was used to subject the sample to fixed frequency and variable frequency, respectively. The fourth method is similar to the first method, with the difference being that the carbon nanotubes were treated in a fluidized air-bed with an ultrasound probe before being used in the fabrication of the NCs with no ultrasound assistance during extrusion. The samples were characterized by MFI, Optical microscopy (OM), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), electrical surface resistivity, and electric charge. MFI decreases in all cases with addition of MWCNTs with the largest decrease observed for samples with the highest MFI. The surface resistivity, which ranged from 10¹³ to 10⁵ Ω/sq, and electric charge, were observed to depend on the ultrasound-assisted fabrication method as well as on the melt flow index of the iPP. A relationship between agglomerate size and area ratio with electric charge was found. Several trends in the overall data were identified and are discussed in terms of MFI and the different fabrication methods.