苯胺衍生物掺杂的PMMA薄膜的二次非线性光学性能的稳定性研究

具有A-π-D电子结构的苯胺衍生物掺杂的玻璃态高聚物PMMA的有机薄膜经极化取向后显示很强的二次非线性光学性能,其取向弛豫是实用化的一个有待解决的重要问题。木文通过几种苯胺衍生物以不同百分比与PMMA掺杂,用紫外-可见吸收光谱、二次谐波强度测量、动态力学粘弹谱等方法进行了取向弛豫的机理研究,结果表明分子尺寸和形状以及偶极矩的大小对取向弛豫有显著影响。     

超细α-FeOOH制备过程研究 Ⅰ.制备工艺

以制备晶形、粒度、轴比等满足高性能磁粉要求的铁黄为目标,研究了碱法超细α-FeOOH合成的工艺配方和工艺条件对粒子性能的影响,包括碱比、气量、转速、Fe(OH)_2结晶条件、熟化时间等工艺参数的影响规律。重复稳定地制备出三类超微粒α-FeOOH粒子,其粒度分别为0.18、0.28、0.39μm,分布均匀,无枝叉。     

医用低值材料采供管理的探讨

医疗消耗材料是医疗工作开展的基础，本文从医用低值消耗材料的计划制定、材料采购、库房库存结构、材料供应、成本核算等多方面探讨了如何对医疗消耗材料进行科学管理，这对医院的医疗发展和管理建设有着重要意义。     

Industrial back belts and low back pain: Mechanisms and outcomes

The recent increased utilization of industrial back belts as personal protective equipment in the workplace has generated considerable controversy among occupational health and safety professionals in the United States. The purpose of this article is to review the literature regarding proposed mechanisms of action of these devices and studies related to outcome of belt utilization in the prevention of low back pain and disability in the workplace. At the present time, neither the suspected mechanisms of action nor the efficacy of these devices in the primary, secondary, and tertiary prevention of work-related low back pain has been adequately demonstrated in clinical trials. As a result, generally accepted guidelines regarding the safe use of belts in the occupational setting have not been established. Based on this review it is recommended that further well-controlled, prospective, randomized clinical trials are necessary to evaluate the effectiveness of these devices as personal protective equipment. During the interim, the decision to prescribe belts to employees in the workplace should be at the discretion of an adequately trained occupational health care provider. These devices should not be provided as an alternative to appropriate administrative and/or engineering controls.     

A flexible, efficient, checkerboard immunoblot system for the detection and semiquantitation of specific antinuclear antibodies.

In this paper an uncomplicated method for the simultaneous detection and semiquantitation of 11 of the 12 commonly studied antinuclear antibodies (ANA) in a single run is described. This new application of checkerboard immunoblotting (CBIB) is based upon available technology and employs purified antigens which can be either purchased or produced in-house. CBIB requires no electronic instrument, can be formatted to meet the needs of the user, is rapidly performed, and has acceptable labor and materials costs. Data on the use of the method to examine available reference antisera is presented. CBIB has also proven practical for the clinical study of 18 sera, at two dilutions per membrane, for each set of specific antinuclear antibodies, also at two or more dilutions.     

颌面赝复材料研究进展

综述了目前口腔颌面赝复材料种类、性能要求及各种颌面赝复材料的组成、性能和应用过程,探讨了各种颌面赝复材料的优势及不足,指出目前临床应用的颌面赝复材料以硅橡胶类为主,其中又以中温硫化硅橡胶和室温硫化硅橡胶综合性能较好,应用最为广泛。     

Diagnosis of fetal rubella infection by nucleic acid hybridization

The efficacy of nucleic acid hybridization for the diagnosis of rubella infection in experimental and clinical materials was compared with immunoblot and virus isolation techniques. Our results showed that nucleic acid hybridization is specific and rapid but gives false-negative results when compared with conventional virus isolation in some experimental although not in clinical materials so far examined. For this reason, a failure to demonstrate rubella virus in fetal specimens by this method alone cannot yet be taken as a sole criterion for ruling out fetal rubella infection.     

壳聚糖作为中枢神经系统支架材料的可行性研究

目的探索壳聚糖作为中枢神经系统组织工程支架材料的可行性。方法选择孕14～16dWistar大鼠剖宫取胎鼠脑进行分离、培养,经巢蛋白、胶原纤维酸性蛋白、特异性烯醇化酶和半乳糖脑苷酯免疫细胞化学染色鉴定获得神经干细胞,种植于壳聚糖膜和明胶膜表面培养,然后行巢蛋白免疫细胞化学染色,观察神经干细胞在壳聚糖膜和明胶膜表面的贴附、生长和分化状态,以及壳聚糖、明胶的降解速度。结果从胎鼠大脑分离获得的神经干细胞,巢蛋白染色呈阳性反应,可分化形成神经元和胶质细胞,分化细胞分别呈胶原纤维酸性蛋白、特异性烯醇化酶和半乳糖脑苷酯染色阳性反应。神经干细胞接种后12h即贴附于壳聚糖膜表面,24h壳聚糖膜和明胶膜均贴附牢固;48h明胶膜表面神经球周围首先出现带突起的分化细胞,壳聚糖膜迟至生长第3天才出现。神经干细胞接种生长后第3天,壳聚糖膜部分降解,明胶膜完全降解;第4天膜表面长满分化细胞;第5、6天壳聚糖膜大部分降解,分化细胞部分死亡。结论壳聚糖与神经干细胞生物相容,具有促细胞贴附和分化作用,由于机械性能差,不宜作为中枢神经组织工程的结构性生物支架材料,但可以单独或者联合促贴附物明胶作为促神经干细胞贴附和分化的支架表面修饰剂。     

衍生肌腱支架材料的细胞相容性研究

目的 探讨衍生肌腱支架材料（tendon derivation biomaterials，TDBM）与肌腱细胞的细胞相容性及肌腱细胞在此三维支架上培养的生物学行为，为肌腱组织工程新型支架材料的应用提供依据。方法将肌腱细胞与TDBM体外复合培养，设置单纯肌腱细胞培养为对照组，进行形态学观察，并检测细胞增殖、细胞周期、细胞DNA倍体水平及肌腱细胞凋亡率。通过^3H-脯氨酸（^3H-Proline）掺入试验了解材料对肌腱细胞胶原合成的影响。结果 肌腱细胞在TDBM上呈梭形生长，TDBM组细胞第2天进入对数增长期，倍增时间为3d，而单纯肌腱细胞培养对照组倍增时间为3．75d。TDBM组与单纯肌腱细胞培养对照组比较，^3H-Proline掺入值差异无统计学意义（P〉0．05），说明细胞功能未受影响。与支架材料复合培养的肌腱细胞DNA指数为0．96，增殖指数较对照组高10．1％，提示肌腱细胞在三维胶原支架上生长速度快，增殖能力强。结论TDBM具有良好的细胞相容性，可作为肌腱细胞的有效载体应用于组织工程化肌腱的构建。     

单宁酸处理带瓣牛颈静脉的生物学评价

目的从生物学角度评价单宁酸处理的带瓣牛颈静脉是否符合国家医用材料的要求。方法带瓣牛颈静脉经单宁酸处理后按国家医用材料的要求进行浸提液的制备、细胞毒性试验、过敏试验、皮内刺激试验、原发性皮肤刺激试验、溶血试验、急性全身毒性试验及热原试验等生物学评价试验。试验方法均参照《医用有机硅材料生物学评价试验方法》GB／T16175-1996。结果培养的L-929小鼠成纤维细胞经含浸提液的培养基培养后形态良好，增值旺盛，材料细胞毒性评级为0～1。无皮肤刺激反应和过敏反应，皮内刺激试验PⅡ（原发性刺激指数）为0．4，和阴性对照组差异无统计学意义。全身毒性实验受试动物未出现毒性症状。溶血试验溶血率0．7％，符合国家标准（〈5％）。热原试验经中国药品生物制品检定所检定，单宁酸处理后带瓣牛颈静脉无热原（样品批号：060802017）。结论单宁酸处理的带瓣牛颈静脉符合国家医用材料的要求，可以植入人体。