骨形态发生蛋白2及碱性成纤维生长因子2对大鼠骨髓间充质干细胞膜片增殖和成骨分化的影响

文题释义： 细胞膜片技术：是在体外接种培养高密度的细胞，使其相互融合生长至100%而形成的透明致密膜状物。该技术不需要胰酶消化即可收集细胞，因此保留了大量的胞外基质、细胞间连接以及细胞-基质连接等结构。目前细胞膜片技术已成为组织工程领域的研究热点，已被推广应用于牙周膜、角膜、心脏、软骨、食管等多种组织器官修复。 成骨细胞：主要由内外骨膜和间充质始祖细胞分化而来，在复杂的骨形成过程中发挥着主要的功能，承担着骨基质的合成、分泌和矿化。骨髓间充质干细胞具有多向分化潜能，能定向分化为成骨细胞，其成骨分化过程可受多种因素的影响，如细胞因子的调控、遗传因素和激素水平等。背景：现阶段骨形态发生蛋白2和碱性成纤维生长因子2对骨髓间充质干细胞膜片增殖、成骨分化的影响和作用机制还尚未可知，如何将生长因子与组织工程细胞膜片技术相整合，最终将其用于骨缺损修复具有重要意义。 目的：探讨单独及联合应用骨形态发生蛋白2和碱性成纤维生长因子2对骨髓间充质干细胞膜片增殖和成骨分化的影响。 方法：体外分离培养鉴定SD大鼠骨髓间充质干细胞并构建细胞膜片，选用不同质量浓度的骨形态发生蛋白2和碱性成纤维生长因子2单独及联合诱导骨髓间充质干细胞膜片，CCK-8法结合碱性磷酸酶活性检测确定2种因子促进膜片增殖和成骨分化的最佳有效质量浓度；然后对骨髓间充质干细胞膜片进行成骨诱导，通过大体及显微镜观察、Vonkossa染色、茜素红染色、RT-PCR检测相关成骨标志物来评估诱导效果。 结果与结论：单独应用骨形态发生蛋白2可增强骨髓间充质干细胞膜片的碱性磷酸酶活性，最佳质量浓度为100 μg/L(P < 0.001)，单独应用碱性成纤维生长因子2能加速骨髓间充质干细胞膜片的增殖，最佳质量浓度为20 μg/L(P < 0.001)，而联合应用既可以促进膜片增殖又能提高其碱性磷酸酶活性(P < 0.001)；经成骨诱导后，4组膜片在形态学上无明显差异，均能诱导骨髓间充质干细胞膜片的成骨分化，其中联合组钙结节最明显(P < 0.001)，可显著促进膜片晚期成骨分化并抑制其早期成骨分化，具有明显的协同促进作用(P < 0.001)。结果表明，骨形态发生蛋白2和碱性成纤维生长因子2联合应用时具有协同作用，既可以促进骨髓间充质干细胞膜片增殖，又能显著增强其成骨诱导能力。ORCID: 0000-0003-1918-579X(何惠宇) 中国组织工程研究杂志出版内容重点：干细胞；骨髓干细胞；造血干细胞；脂肪干细胞；肿瘤干细胞；胚胎干细胞；脐带脐血干细胞；干细胞诱导；干细胞分化；组织工程     

白藜芦醇对酒精诱导雄性大鼠骨量减少和骨强度降低的保护作用

目的探索白藜芦醇对酒精诱导雄性大鼠骨量减少和骨强度降低的影响。方法 30只12周雄性大鼠随机分为对照组、模型组和治疗组3组,每组10只。模型组和治疗组大鼠给予0.4 mL/100 g的20%乙醇溶液,每周3次。治疗组接受白藜芦醇40 mg/kg治疗,每日一次,治疗为期12周。治疗结束时收集血清和股骨对治疗结果进行评价。结果治疗12周后,治疗组的股骨骨密度较模型组显著升高,差异有统计学意义(P0.05);Mircro-CT显示治疗组大鼠股骨干骺端较模型组具有更多骨小梁以及更佳的骨微观参数,差异有统计学意义(P0.05);生物力学结果显示治疗组股骨的极限载荷和峰值负荷较模型组显著升高,差异有统计学意义(P0.05);而血清检测结果表明治疗组的碱性磷酸酶和骨钙素较模型组明显降低,差异有统计学意义(P0.05)。结论白藜芦醇对酒精诱导雄性大鼠骨量减少和骨强度降低有一定的保护作用。     

Caffeic Acid–coated Nanolayer on Mineral Trioxide Aggregate Potentiates the Host Immune Responses,Angiogenesis, and Odontogenesis

IntroductionThe aim of this study was to investigate whether mineral trioxide aggregate (MTA) can be modified with caffeic acid (CA) to form caffeic acid/mineral trioxide aggregate (CAMTA) cement and to evaluate its physicochemical and biological properties as well as its capability in immune suppression and angiogenesis.MethodsMTA was immersed in trishydroxymethyl aminomethane buffer with CA to allow coating onto MTA powders. X-ray diffractometry and tensile stress-strain tests were conducted to assess for physical characteristics of CAMTA and to evaluate for successful modification of MTA. Then, the CAMTA cement was immersed in simulated body fluid to evaluate its hydroxyapatite formation capabilities and Si release profiles. In addition, RAW 264.7 cells and human dental pulp stem cells were used to evaluate CAMTA’s immunosuppressive capabilities and cell responses, respectively. hDPSCs were also used to assess CAMTA’s angiogenic capabilities.ResultsThe X-ray diffractometry results showed that CA can be successfully coated onto MTA without disrupting or losing MTA’s original structural properties, thus allowing us to retain the initial advantages of MTA. CAMTA was shown to have higher mechanical properties compared with MTA and had rougher pitted surfaces, which were hypothesized to lead to enhanced adhesion, proliferation, and secretion of angiogenic- and odontogenic-related proteins. In addition, it was found that CAMTA was able to enhance hydroxyapatite formation and immunosuppressive capabilities compared with MTA.ConclusionsCAMTA cements were found to have improved physicochemical and biological characteristics compared with their counterpart. In addition, CAMTA cements had enhanced odontogenic, angiogenic, and immunosuppressive properties compared with MTA. All of the results of this study proved that CAMTA cements could be a biomaterial for future clinical applications and tissue engineering use.     

Contemporary bone loss options: Rebuild,reinforce, and augment

Bone loss is commonly encountered during revision total knee arthroplasty (TKA). Small defects can be adequately managed with cement filling (with or without screws), modular prosthetic augments, and morselized allograft. For larger defects, cancellous impaction grafting and structural allografts have traditionally been utilized. More recently, highly porous tantalum cones and titanium sleeves have been designed to achieve axial and rotational stability in the metaphysis and subsequent biologic fixation. Sleeves are linked to one type of prosthesis, whereas cones are unlinked and can be used with any implant design. Multiple studies have demonstrated excellent survivorship and radiographic osseointegration at mid-term follow-up. This article provides a review of contemporary methods of bone loss management with a focus on highly porous metals and an emphasis on the authors’ preferred method for managing the severe bone loss in revision TKA.