Clinical course of masticatory function recovery following arthrocentesis in patients with unilateral mandibular condyle head fracture

The aim of this study was to investigate the clinical course of masticatory function recovery following arthrocentesis. Patients with a unilateral condylar head fracture who underwent arthrocentesis for therapeutic reasons were evaluated and compared with patients with a unilateral condylar head fracture who did not undergo arthrocentesis. At 3 months after treatment, the occlusal contact area and maximum bite force in patients with a fracture treated with arthrocentesis were greater than in those who did not receive arthrocentesis at the same time points, although the differences were not significant. Moreover, at 1 and 3 months following arthrocentesis, mean (±SD) occlusal contact area (1 month: 1.99 ± 0.55 mm², p = 0.01; 3 months: 2.90 ± 1.36 mm², p = 0.03) and maximum bite force (1 month: 82.45 ± 15.04 N, p = 0.01; 3 months: 101.11 ± 14.53 N, p = 0.01) on the fractured side in patients who underwent that treatment were significantly reduced when compared with those on the non-fractured side. The authors conclude that if the priority is to avoid open reduction and internal fixation, then the arthrocentesis approach might be a less invasive alternative, albeit with the price of a prolonged healing interval.     

运动学对线应用于全膝关节置换术的研究进展

全膝关节置换术是目前治疗终末期膝关节骨性关节炎最有效的方法之一，全膝关节置换术后膝关节功能、术后膝关节疼痛与术后下肢力线有着密切的关系。目前膝关节置换术下肢对线方式主要采用机械力学对线方法，该方法可以改善膝关节功能，但是有部分患者也会产生术后膝关节的疼痛、活动受限等并发症，导致术后患者满意度较差。近些年越来越多的研究开始关注运动力学对线技术并应用于临床。运动学对线技术旨在重建患者的解剖结构，将膝关节假体运动轴与膝关节生理性运动轴保持一致，减少膝关节周围软组织和韧带的松解，实现膝关节生理性运动。该文就运动力学对线方法在全膝关节置换术中的应用进展作一综述。     

Principles of pressure transducer function and sources of error in clinical use

The invasive measurement of physiological pressures is a common requirement in anaesthesia and intensive care medicine. From arterial blood pressure to intracranial pressure, these calculated variables give a swift graphical and numerical representation of a patient's current physiological status. This allows us to respond rapidly to conditions outside our preferred parameters and to carefully titrate treatment to target effects. These systems are, however, not infallible. An understanding of the principles of their function will promote appropriate use and an ability to recognize and react to sources of error. This article aims to furnish the reader with this level of understanding in order to inform their academic and clinical practice.     

User experiences with second-generation 32-gauge × 4 mm vs. thinner comparator pen needles: prospective randomized trial

Abstract

Objective

Two similarly designed studies compared user experiences with a second-generation extra-thin-wall, 5-bevel 32?G?×?4?mm pen needle (PN) with redesigned hub versus four thinner commercially available PNs.     

多力视角下社会资本参与基层卫生服务的动力机制及优化策略研究

社会办医作为我国基层卫生服务的重要组成部分,可以弥补基层卫生机构发展总量与质量不足等问题,对于推进整个基层卫生服务高质量发展也是有着重大裨益。文章从物理学的"力"出发,运用支持力,推力,引力,阻力,摩擦力五种"力"探讨社会资本参与基层卫生服务的动力形成机制,并构建动力斜坡图,针对存在问题,提出加大支持力和引力,合理利用推力,减少摩擦力,消除阻力等优化建议,以期助力社会资本参与基层卫生服务建设平稳进行。     

物理性刺激对骨膜软骨生成的影响

目的探讨物理性刺激对骨膜软骨生成方面的影响,以期培养出一种与正常关节软骨更相似的软骨组织。方法从新西兰大白兔胫骨近端内侧取下骨膜,将骨膜固定在支架上,然后将细胞支架悬吊在旋转瓶内,用水流产生的剪切应力去刺激骨膜。通过宏观观察、体积大小测量、组织切片染色与细胞外基质(ECM)成分的比较及生物力学测试分析软骨体外生长的最佳环境。结果宏观观察发现软骨生长的方向与水流的方向相同。组织切片染色可见有两层不同形态的软骨细胞和不同密度的ECM,免疫组织化学染色见在剪切应力的刺激下,软骨表面可分泌浅层蛋白质及润滑剂,且在不同大小的剪切应力刺激时,软骨表面还会产生不同厚度的表层。结论剪切应力刺激能使骨膜上的干细胞分化形成软骨,同时证明力学环境不仅影响细胞的分化与生长,而且影响细胞的形态与ECM的分泌。     

亚麻籽胶的胶凝性质

采用流变学法测定了亚麻籽胶溶液的胶凝点、熔化点，并采用质构仪、扫描电镜和原子力显微镜等手段研究了影响亚麻籽胶凝胶强度的因素，结果表明亚麻籽胶具有胶凝性，它能形成一种热可逆的冷致凝胶，亚麻籽胶溶液的胶凝点低于其凝胶的熔化点，且亚麻籽胶溶液的胶凝点及其凝胶的熔化点均随冷却的起始温度的升高而升高。亚麻籽胶浓度、溶解温度、pH、NaCl、CaCl2及复合磷酸盐能影响亚麻籽胶的凝胶强度，亚麻籽胶的凝胶强度随着浓度的增加及溶解温度的升高而增强；在pH6～9的范围内，亚麻籽胶的凝胶强度达到最大；NaCl和复合磷酸盐可以降低亚麻籽胶的凝胶强度，低浓度（〈0．3％）的CaCl2可以增强亚麻籽胶的凝胶强度，而高质量分数（〉0．3％）的CaCl2能降低亚麻籽胶的凝胶强度。     

胸椎椎弓根根外固定螺钉拔出力的实验研究

目的:比较两种胸椎椎弓根根外固定方法与经椎弓根固定方法的螺钉拔出强度,评价胸椎椎弓根根外固定的生物力学效果。方法:新鲜胸椎标本4具,共32个肋骨-椎骨序列,根据螺钉固定方法不同分为3组,A组采用经椎弓根固定,B组采用经横突-椎体固定,C组采用经改良肋横突法固定。根据所用螺钉规格不同将其分为4种不同测试条件:D1,螺钉直径5.5mm,长度40mm;D2,螺钉直径5.5mm,长度45mm;D3,螺钉直径6.5mm,长度45mm;D4,螺钉直径6.5mm,长度50mm。测试3种固定方法下的螺钉拔出力,并做统计学分析对比。结果:D1条件下A组拔出力为787.0±119.3N,B组为706.2±109.4N,C组为616.1±82.3N,3组间比较有显著性差异(P<0.01);D2条件下A组拔出力为862.3±128.7N,B组为811.4±113.6N,C组为655.1±92.2N,A、B组间比较无显著性差异(P>0.05),A、B组与C组比较有显著性差异(P<0.01);D3条件下,A组拔出力为855.3±117.1N,B组为938.0±131.5N,C组为861.3±117.8N,A、C组间比较无显著性差异(P>0.05),A、C组与B组比较有显著性差异(P<0.01);D4条件下A组拔出力为864.3±120.9N,B组为959.6±135.2N,C组为941.2±115.4N,A组与B、C组比较均有显著性差异(P<0.01),B、C组间比较无显著性差异(P>0.05)。结论:使用直径6.5mm、长度45～50mm的螺钉固定时,胸椎椎弓根根外固定螺钉拔出力优于椎弓根固定,有较好的生物力学效果。