Management of sagittal craniosynostosis: morphological comparison of eight surgical techniques

The aim of this study was to carry out a retrospective multicentre study comparing the morphological outcome of 8 techniques used for the management of sagittal synostosis versus a large cohort of control patients. Computed tomographic (CT) images were obtained from children CT-scanned for non-craniosynostosis related events (n = 241) and SS patients at preoperative and postoperative follow-up stages (n = 101). No significant difference in morphological outcomes was observed between the techniques considered in this study. However, the majority of techniques showed a tendency for relapse. Further, the more invasive procedures at older ages seem to lead to larger intracranial volume compared to less invasive techniques at younger ages. This study can be a first step towards future multicentre studies, comparing surgical results and offering a possibility for objective benchmarking of outcomes between methods and centres.     

运动学对线应用于全膝关节置换术的研究进展

全膝关节置换术是目前治疗终末期膝关节骨性关节炎最有效的方法之一，全膝关节置换术后膝关节功能、术后膝关节疼痛与术后下肢力线有着密切的关系。目前膝关节置换术下肢对线方式主要采用机械力学对线方法，该方法可以改善膝关节功能，但是有部分患者也会产生术后膝关节的疼痛、活动受限等并发症，导致术后患者满意度较差。近些年越来越多的研究开始关注运动力学对线技术并应用于临床。运动学对线技术旨在重建患者的解剖结构，将膝关节假体运动轴与膝关节生理性运动轴保持一致，减少膝关节周围软组织和韧带的松解，实现膝关节生理性运动。该文就运动力学对线方法在全膝关节置换术中的应用进展作一综述。     

Orthogonally oriented scaffolds with aligned fibers for engineering intestinal smooth muscle

Controlling cellular alignment is critical in engineering intestines with desired structure and function. Although previous studies have examined the directional alignment of cells on the surface (x–y plane) of parallel fibers, quantitative analysis of the cellular alignment inside implanted scaffolds with oriented fibers has not been reported. This study examined the cellular alignment in the x–z and y–z planes of scaffolds made with two layers of orthogonally oriented fibers. The cellular orientation inside implanted scaffolds was evaluated with immunofluorescence. Quantitative analysis of coherency between cell orientation and fiber direction confirmed that cells aligned along the fibers not only on the surface (x–y plane) but also inside the scaffolds (x–z & y–z planes). Our study demonstrated that two layers of orthogonally aligned scaffolds can generate the histological organization of cells similar to that of intestinal circular and longitudinal smooth muscle.     

Association of quadriceps angle with plantar pressure distribution,navicular height and calcaneo-tibial angle

ObjectiveThe aim of study was to analyze the association between Quadriceps Angle (QA) and plantar pressure, navicular height (NH), and calcaneo-tibial angle (CTA).MethodsA total of 64 volunteers (mean age: 22.25 ± 2.54 (range:19–33)) participated in this cross sectional study. EMED-m (Novel GmbH, Germany) electronic pedobarograph was employed for dynamic plantar pressure measurement using two step protocol. The angle between the vertical axis of calcaneus and the long axis of Achilles tendon for CTA. The height of navicular tubercle from the ground was measured while the subject was standing on both feet for NH. QA was measured while the subject was standing in a relaxed posture where both feet bearing equal weight.ResultsThere were significant negative correlations between QA and maximum force (MxF) under the 4th. metatarsal head (MH4). The QA was also significantly correlated with MxF and force-time integral (FTI) under the bigtoe (BT). FTI under the 3rd. metatarsal head (MH3), MH4 and 5th. metatarsal head (MH5) were significantly negatively correlated with QA. Pressure-time integral (PTI) under the MH4 and MH5 were found to be significantly negatively correlated with QA. A significant correlation was also found between QA and NH (p < 0.0001), whilst there was no correlation between QA and CTA. Regression analysis showed that NH was appeared as the major contributor for the QA (β = −0.49, p < 0.001) in the dynamic condition, followed by BT-FTI (β = 0.37, p < 0.001) and MH5-MxF (β = −0.21, p < 0.037).ConclusionThese findings may imply that the NH which can at least be controlled by appropriate shoe inserts may affect QA. This way, loading pattern of both plantar region and whole lower extremity may be altered.Level of evidenceLevel III, Diagnostic Study.     

Effect of Day Optimizing Throughput (Dot) Knee Software Implementation on Magnetic Resonance Imaging Workflow Efficiency

PurposeAttempts by magnetic resonance (MR) manufacturers to help imaging centres improve patient throughput has led to the development of more automated acquisition. This software is capable of customizing individual scan alignment; potentially improving imaging efficiency and standardizing protocols. However, substantial investments are required to introduce such systems, potentially deterring their widespread application. This study assessed the implementation costs and reduction in examination durations for automated knee MR imaging (MRI) software.Materials and MethodsResearch activities were performed at a community-based academic centre on a 3-Tesla (3-T) system using Siemens' Day Optimizing Throughput (Dot) knee software. Examination acquisition times were extracted from the system before and after software implementation. Fiscal year 2012/13 finances were used to determine the average hourly cost of MRI utilization. Costs associated with automated software implementation were also calculated. Finally, the number of knee scans required to achieve a positive return on investment using the software was established.Results and DiscussionThe mean (standard deviation, sample size) pre- and post-Dot software scan times were 23.20 (4.18, n = 266) and 21.94 (4.51, n = 59) minutes, respectively, for a routine knee scan and 11.88 (1.60, n = 74) and 11.24 (1.51, n = 27) minutes, respectively, for a fast knee scan. The overall weighted average resulted in a 64-second time savings per automated knee examination. This negligible time savings would be extremely difficult to make use of clinically. Dot simplified 29 unique knee protocols to two, improving the consistency of knee examinations. Current Dot software is not compatible with all patients and therefore has limitations that are a concern among MR technologists.ConclusionAdoption of automated knee systems could assist in standardizing protocols; however, the cost of implementation and difficulty in modifying patient scheduling to reflect the minimal time savings would make a financial return unlikely to occur at small- and medium-sized institutions.     

No Correlation Between Clinical Outcomes and Changes in the Tibia-Metaphyseal Angle Following Total Knee Arthroplasty: A Retrospective Study

BackgroundDespite numerous advances in the implant design and surgical technique, improvement in patient satisfaction following total knee arthroplasty (TKA) has plateaued. Various TKA alignment strategies have been introduced that impact the coronal positioning of the tibial component relative to the native joint line. This study aims to analyze if postoperative variance of the joint line from preoperative native alignment is correlated with changes in patient-reported outcomes following primary TKA.MethodsA retrospective review of an academic center’s patient population identified all primary TKAs between 2013 and 2021 with full-length, standing radiographs and patient-reported outcome measures (PROMs) data. These measures included the Knee injury and Osteoarthritis Outcome Score for Joint Replacement, Patient-Reported Outcome Measurement Information System, and Veterans RAND 12 scores. Preoperative and postoperative radiographic measurements for hip-knee angle, tibia-metaphyseal angle, tibial-axis orientation angle, and joint-line obliquity angle were recorded. Three-month, 1-year, and 2-year PROM scores were correlated with the change in degrees for each of the angles using a Spearman’s correlation. A Mann-Whitney U-test was used to compare angular changes with a change in PROM scores.ResultsOne hundred and ninety nine patients (204 knees) with a mean age of 67 years were included. Average follow-up was 23 months. Three-month, 1-year, and 2-year follow-up rates were 93%, 64%, and 34%, respectively. Improvements were seen across all PROMs regardless of an angular change.ConclusionThere were no clear correlations between PROMs and variation in joint line obliquity in the coronal plane. These data suggest that the magnitude of the variation in coronal tibial alignment from native alignment does not impact PROMs. Further study is indicated to correlate an angular change with functional measures.     

胸廓矢状面倾斜度的测定及其对放疗的意义

目的了解人体前胸矢状面倾斜度的大小及对放疗剂量分布的影响。方法选择126例患者行胸部CT扫描并予正中矢状面重建。分别测定上中下胸廓层面前后体表中线至脊髓距离及各层上下间距,计算出前胸倾斜度。查TMR表得出中平面深度及脊髓深度处上中胸及中下胸层面剂量误差。结果前野各层面至脊髓距离变化较大,后野变化较小。人体前胸倾斜度范围为25~56°。上中胸段组的上下缘剂量误差较大,躯体中平面平均相差8%,脊髓17%。中下胸段组剂量误差较小,躯体中平面4%,脊髓7%。误差随倾斜角度增加而增加。根据倾斜度得出合适的楔形板修正角度大约为10~35°。结论人体前胸矢状面存在自然倾斜度,这种倾斜影响前野剂量分布,应予以个体化修正。建议根据角度的大小选择合适的头足向楔形板优化。     

Two-level posterior lumbar interbody fusion for degenerative disc disease: improved clinical outcome with restoration of lumbar lordosis

BACKGROUND CONTEXT: Although posterior lumbar interbody fusion (PLIF) for degenerative lumbar diseases is routine, there are few reports on double-level PLIF. PURPOSE: To evaluate the clinical outcomes of double-level PLIF. STUDY DESIGN/SETTING: A retrospective study of operated cases in Gifu, Japan. PATIENT SAMPLE: Nineteen patients (8 men and 11 women, 59.5+/-10.2 years) who underwent double-level PLIF between 1996 and 2001. OUTCOME MEASURES: Operation time, blood loss, complications, the Japanese Orthopaedic Association (JOA) score for back pain and lumbar sagittal alignment were evaluated. METHODS: Patients were examined retrospectively at follow-ups of 3.6+/-1.7 years. Primary diseases were spondylolisthesis, spinal canal stenosis, degenerative scoliosis and herniated intervertebral disc. Fusion areas were L3 to L5 in 15 cases and L4 to S1 in 4 cases. RESULTS: The mean JOA score increased from an initial score of 12.9+/-3.5 to 21.3+/-4.9 at the final follow-up. There was a positive correlation (R=0.718, p<.001) between the increase in lordotic angle and the increase in the JOA score. Several parameters suggested that the surgical invasiveness was not minimal. CONCLUSION: Double-level PLIF provided satisfactory results and preserved lumbar spine lordosis.     

Significance of beaten copper appearance on skull radiographs in children with isolated sagittal synostosis

Aims and Objectives The significance of beaten copper appearance (BCA) on skull radiographs in children following surgery for isolated sagittal craniosynostosis has not been studied. This study was designed to look for any correlation between BCA and symptoms suggestive of intracranial hypertension in this group of patients. Materials and Methods Forty-eight consecutive children, who were operated for isolated sagittal synostosis from1987 to 2000 and had postoperative skull radiographs, were included. Patients were divided into: (a) BCA group (n = 20), consisting of children who had beaten copper appearance on skull radiographs at last follow up, and (b) Non-BCA group (n = 28), consisting of children who did not have this finding. Records were reviewed to look for symptoms suggestive of intracranial hypertension, such as headache, head banging, and irritability. Results Median age at surgery was 4.8 months for BCA group and 4 months for the non-BCA group. Follow up ranged from 4 to 156 months with a mean of 36.2 months. Total of 28.6% (n = 6) of the children with follow up radiographs done at ≤18 months of age had BCA. The incidence of BCA increased to 83.3% in children with skull radiographs performed after 48 months of age. In 18 (90%) children, the BCA was ‘diffuse’ with 5 (25%) children having the maximum possible score of 8. In the BCA group, 45% (n = 9) had symptoms compared to 10.7% (n = 3) in the control group (p = 0.0068). Conclusions This study suggests a significant number of children with BCA on radiographs develop symptoms suggestive of raised ICP following surgical treatment in infancy and prolonged follow up may be warranted in this group of patients.     

矢状缝早闭(舟状头)全颅成形术

目的探讨治疗矢状缝早闭(舟状头)畸形的手术方法。方法采用David“‖”形颅缝重建法(6例)、旋转骨瓣截骨法(2例)、梅花颅骨瓣头颅盖成型法(3例)等术式对舟状头进行矫治。结果11例患儿均治愈,外形满意。结论1~3个月舟状头宜采用简单的David“‖”形颅缝重建法进行治疗,3个月以上的患儿可选用浮动颅骨瓣头颅成型术、梅花瓣法颅骨瓣头颅盖成型术等方法进行治疗。