Fatigue analysis of restored teeth longitudinally cracked under cyclic loading

ObjectiveTo investigate the fatigue behavior of restored teeth, in particular the mechanisms of longitudinal dentinal cracking under cyclic mechanical loading, using finite element analysis (FEA) and the stress-life (S-N) approach.MethodsTen root-filled premolars restored with resin composites were subjected to step-stress cyclic loading to produce longitudinal cracks. Fracture loads and number of cycles completed at each load level were recorded. FEA was used to predict the stress amplitude of each component under the global cyclic load. Both intact and debonded conditions were considered for the dentin-composite interface in the FEA. The predicted stress concentrations were compared with the fracture patterns to help elucidate the failure mechanisms. The S-N approach was further used to predict the lifetimes of the different components in the restored teeth. Cumulative fatigue damage was represented by the sum of the fractions of life spent under the different stress amplitudes.ResultsLongitudinal cracks were seen in ~50% of the samples with a mean fracture load of 770 ± 45 N and a mean number of cycles to failure of 32,297 ± 12,624. The longitudinal dentinal cracks seemed to start near the line angle of the cavity, and propagated longitudinally towards the root. The sum of fractions of life spent for the dentin-composite interface exceeded 1 after ~7000 cycles when that for dentin was much lower than 1, indicating that interfacial debonding would occur prior to dentin fracture. This was supported by micro-CT images showing widened interfacial space in the cracked samples. In the debonded tooth, FEA showed dentinal stress concentrations at the gingival wall of the cavity, which coincided with the longitudinal cracks found in the cyclic loading test. The sum of fractions of life spent for dentin was close to 1 at ~30,000 cycles, similar to the experimental value.SignificanceDebonding of the dentin-composite interface may occur prior to longitudinal cracking of dentin in root-filled teeth under cyclic loading. The approximate time of occurrence for these events could be estimated using fatigue analysis with stresses provided by FEA. This methodology can therefore be used to evaluate the longevity of restoration designs for root-filled teeth.     

有限元法生物力学分析在青少年特发性脊柱侧凸治疗及病因研究中的应用

青少年特发性脊柱侧凸发病率较高且病情复杂,对青少年身心健康可造成显著影响,但其因病因不明,临床尚未形成治疗共识。近年来基于患者医学影像进行仿真建模的有限元法生物力学分析在青少年特发性脊柱侧凸治疗及其病因研究中已经有了一系列的应用。本文即从非手术治疗、手术治疗、病因研究、现有局限等角度对有限元法生物力学分析在青少年特发性脊柱侧凸中的应用进行综述,以期为临床实践及相关研究提供参考。     

Eulerian Algorithms for Computing the Forward Finite Time Lyapunov Exponent Without Finite Difference upon the Flow Map

In this paper, effective Eulerian algorithms are introduced for the computation of the forward finite time Lyapunov exponent (FTLE) of smooth flow fields. The advantages of the proposed algorithms mainly manifest in two aspects. First, previous Eulerian approaches for computing the FTLE field are improved so that the Jacobian of the flow map can be obtained by directly solving a corresponding system of partial differential equations, rather than by implementing certain finite difference upon the flow map, which can significantly improve the accuracy of the numerical solution especially near the FTLE ridges. Second, in the proposed algorithms, all computations are done on the fly, that is, all required partial differential equations are solved forward in time, which is practically more natural. The new algorithms still maintain the optimal computational complexity as well as the second order accuracy. Numerical examples demonstrate the effectiveness of the proposed algorithms.     

A High Order Bound Preserving Finite Difference Linear Scheme for Incompressible Flows

We propose a high order finite difference linear scheme combined with a high order bound preserving maximum-principle-preserving (MPP) flux limiter to solve the incompressible flow system. For such problem with highly oscillatory structure but not strong shocks, our approach seems to be less dissipative and much less costly than a WENO type scheme, and has high resolution due to a Hermite reconstruction. Spurious numerical oscillations can be controlled by the weak MPP flux limiter. Numerical tests are performed for the Vlasov-Poisson system, the 2D guiding-center model and the incompressible Euler system. The comparison between the linear and WENO type schemes, with and without the MPP flux limiter, will demonstrate the good performance of our proposed approach.     

Three-dimensional soft tissue prediction in orthognathic surgery: a clinical comparison of Dolphin,ProPlan CMF,and probabilistic finite element modelling

Three-dimensional surgical planning is used widely in orthognathic surgery. Although numerous computer programs exist, the accuracy of soft tissue prediction remains uncertain. The purpose of this study was to compare the prediction accuracy of Dolphin, ProPlan CMF, and a probabilistic finite element method (PFEM). Seven patients (mean age 18 years; five female) who had undergone Le Fort I osteotomy with preoperative and 1-year postoperative cone beam computed tomography (CBCT) were included. The three programs were used for soft tissue prediction using planned and postoperative maxillary position, and these were compared to postoperative CBCT. Accurate predictions were obtained with each program, indicated by root mean square distances: RMS_Dolphin = 1.8 ± 0.8 mm, RMS_ProPlan = 1.2 ± 0.4 mm, and RMS_PFEM = 1.3 ± 0.4 mm. Dolphin utilizes a landmark-based algorithm allowing for patient-specific bone-to-soft tissue ratios, which works well for cephalometric radiographs but has limited three-dimensional accuracy, whilst ProPlan and PFEM provide better three-dimensional predictions with continuous displacements. Patient or population-specific material properties can be defined in PFEM, while no soft tissue parameters are adjustable in ProPlan. Important clinical considerations are the topological differences between predictions due to the three algorithms, the non-negligible influence of the mismatch between planned and postoperative maxillary position, and the learning curve associated with sophisticated programs like PFEM.     

Acquired acrodermatitis enteropathica due to zinc‐depleted parenteral nutrition

Well‐known causes of zinc deficiency, also referred to as acrodermatitis enteropathica (AE), include defects in intestinal zinc transporters and inadequate intake, but a rare cause of acquired zinc deficiency discussed here is an iatrogenic nutritional deficiency caused by parenteral nutrition administered without trace elements. While zinc‐depleted parenteral nutrition causing dermatosis of acquired zinc deficiency was first reported in the 1990s, it is now again relevant due to a national vitamin and trace element shortage. A high index of suspicion may be necessary to diagnose zinc deficiency, particularly because early clinical findings are nonspecific. We present this case of acquired zinc deficiency in a patient admitted to a pediatric intensive care unit for respiratory distress and atypical pneumonia, who subsequently developed a severe bullous eruption due to iatrogenic zinc deficiency but was treated effectively with enteral and parenteral zinc supplementation, allowing for rapid re‐epithelialization of previously denuded skin.     

Influence of minimally invasive endodontic access cavities and bonding status of resin composites on the mechanical property of endodontically-treated teeth: A finite element study

ObjectiveTo study the mechanical behavior of endodontically-treated teeth with minimally invasive endodontic access cavities and resin composite restorations under different bonding conditions using finite element analysis (FEA).MethodsFour Class-II endodontic access cavities including the mesio-occlusal minimally-invasive (MO-MIE), mesio-occlusal conventional (MO-CONV), disto-occlusal minimally-invasive (DO-MIE), and disto-occlusal conventional (DO-CONV) cavities were prepared in 3D-printed maxillary first molars. Each tooth was subjected to root canal preparation and scanned using micro-CT to provide a 3D structural model which was virtually restored with resin composite. An intact 3D-printed molar was used as control. FEA was conducted under a 250-N vertical load. Three different interfacial bonding conditions between dentin/enamel and resin composite were considered, i.e. fully bonded, partially debonded, and fully debonded. The maximum principal stress of dentin and the normal tensile stress at the interfaces were recorded. The risk factor of failure for each component was then calculated.ResultsIn the fully-bonded tooth, the dentin-composite interface showed significantly higher stress and a higher risk factor than dentin, indicating that debonding at the dentin-composite interface would occur prior to dentin fracture. With the dentin-composite interface debonded, the enamel-composite interface exhibited higher stress and a higher risk factor than dentin, indicating that debonding at the enamel-composite interface would occur next, also prior to dentin fracture. With the resin composite fully debonded from the tooth, stress in dentin increased significantly. Irrespective of the bonding status, the CONV groups exhibited higher median stresses in dentin than the MIE groups.SignificanceWithin the limitation of this study, it was shown that debonding of the resin composite restoration increased the stress in dentin and hence the risk of dentin fracture in endodontically-restored teeth. Minimally-invasive access cavities could better safeguard the fracture resistance of interproximally-restored teeth compared to conventional ones.     

郑州地区孕妇铁营养状况及其影响因素调查

目的 探讨郑州地区孕妇铁营养状况及其影响因素。方法 以2021年4—8月在郑州市某三家医院建立健康档案并进行孕期体检的孕妇作为研究对象进行问卷调查及铁营养状况检测,采用描述流行病学方法对孕妇铁营养状态进行分析,并采用单、多因素分析方法对孕妇铁缺乏状况影响因素进行分析。结果 共有3 258例孕妇参与本次研究,其中妊娠早期989例,占30.36%,妊娠中期1 125例,占34.53%,妊娠晚期1 144例,占35.11%。在3 258名孕妇中,共有773例为铁缺乏,铁缺乏的检出率为23.73%。多因素分析结果显示,年龄≥35岁（OR=2.726）、处于妊娠的中期或晚期（OR=3.037,3.438）、月经初潮年龄<13岁（OR=2.432）、经产妇（OR=3.493）、流产次数≥3次（OR=2.648）、孕前月经量≥100 mL/次（OR=2.420）、文化程度为初中及以上（OR=0.517,0.459）、居住在农村（OR=3.684）、家庭月收入>3 000元及以上（OR=0.601,0.542）、居住房屋装修时间<1年（OR=6.449）、罹患消化系统疾病（OR=4.716）、有营养补齐剂摄入（OR=0.355）是孕妇铁缺乏的影响因素。结论 郑州市孕妇铁缺乏检出率较高,需要尽早给予针对性的干预。部分因素被确定为该地区孕妇人群发生铁元素缺乏的影响因素,可选择性的对其中危险因素给予干预。