The Stiff Elbow

Elbow motion is essential for upper extremity function to position the hand in space. Unfortunately, the elbow joint is prone to stiffness following a multitude of traumatic and atraumatic etiologies. Elbow stiffness can be diagnosed with a complete history and physical exam, supplemented with appropriate imaging studies. The stiff elbow is challenging to treat, and thus, its prevention is of paramount importance. When this approach fails, non-operative followed by operative treatment modalities should be pursued. Upon initial presentation in those who have minimal contractures of 6-month duration or less, static and dynamic splinting, serial casting, continuous passive motion, occupational/physical therapy, and manipulation are non-operative treatment modalities that may be attempted. A stiff elbow that is refractory to non-operative management can be treated surgically, either arthroscopically or open, to eliminate soft tissue or bony blocks to motion. In the future, efforts to prevent and treat elbow stiffness may target the basic science mechanisms involved. Our purpose was to review the etiologies, classification, evaluation, prevention, operative, and non-operative treatment of the stiff elbow.     

The callous elbow and aging of the upper arm

The author describes his surgical approach to the problems of the aging upper arm and elbow region. Surgery at an appropriate age can prevent the progressive wrinkling of the elbow which is further aggravated by aging of the upper arm. The author's operation is aimed at correcting both portions of the arm anatomy at the same time.     

Relationship Among MRTA, DXA, and QUS

Dual-energy X-ray absorptiometry (DXA) and quantitative ultrasound (QUS) are the accepted modalities for the evaluation of fracture risk in the clinical setting. However, neither method provides a direct measurement of bone mechanics. In this study, we investigated a prototype device, known as a mechanical response tissue analyzer (MRTA), which provides direct mechanical measurements of mechanical properties of bone. A total of 56 healthy volunteers (20 men and 36 women) between the ages of 18 and 83 were recruited. The MRTA was used to measure the cross-sectional bending stiffness (EI) of the ulna bone. Axial speed of sound (SOS) at the ulna bone was determined by QUS; bone mineral content (BMC) and bone mineral density (BMD) were determined by DXA. Correlations, regression analysis, and analyses of variance (ANOVAs) were used to compare the three modalities. These analyses revealed that although there are strong linear relationships among the data collected by the various technologies, the bone properties reflected by MRTA are not fully explained by DXA and QUS. We conclude that the total information conveyed by MRTA measurements is unique. Further research is needed to delineate the different qualities of bone strength that are captured by MRTA, but not by DXA or QUS.     

手法治疗肘关节错缝86例

2000年1月-2005年10月共治疗肘关节错缝86例,临床效果满意,现报告如下。1临床资料86例中男61例,女25例;年龄13~46岁。受伤机制:均为跌倒时手掌着地,肘关节过伸导致。摄X线片未见骨折及关节异常。肘关节伸屈活动障碍,伸20°~40°,屈90°~110°,屈伸平均(70·57°±3·01°)的活动范围。肘关节轻度肿胀,以内后方为甚,压痛点为尺骨半月切迹的内侧,强作旋后活动时会引起剧烈疼痛,肘三角正常。受伤至就诊时间1~3 d,平均1·5 d。2治疗方法2·1复位左肘错缝者坐于靠背椅上,助手立于患者侧背后方,紧握患者上臂,术者于患者前侧,左手握患者腕部,右手…     

Non-invasive estimation of the diastolic elastic and viscoelastic properties of the left ventricle

The present study applies a non-invasive method to the quantitative evaluation of left ventricular stiffness in normal subjects and in patients with ischaemic heart disease (IHD). We have studied 20 patients with IHD and 25 healthy subjects. The third heart sound (S3) was detectable in all patients. We have correlated the energy spectrum of S3, divided into 15 Hz bands, with a series of echocardiographic parameters. The existence of a significant correlation between the spectrum energy and the diameter and thickness of the left ventricle at the moment of S3 allowed us to explore the possibility of interpreting the origin of S3 based on a mathematical model. Our hypothesis has been that, once the left ventricle starts vibrating, it behaves as a simple physical model composed of a mass and an elastic element. To this purely elastic model one can add a factor accounting for viscosity, with a damping effect, to obtain a more complex viscoelastic model. The stiffness coefficient 'k' was computed in both models from the peak frequency of S3 and the left ventricular mass at the moment of S3. Furthermore, in the viscoelastic model, the damping element 'c' was also computed. Both parameters--k and c--were significantly increased in the group with IHD compared with the control group. Although a simplification of the vibrating system, these models make it possible to obtain non-invasively information on the characteristics of the left ventricle through the combined use of echocardiography and spectral analysis of S3.     

The effect of ionic strength on the kinetics of rigor development in skinned fast-twitch skeletal muscle fibres

 Recent atomic 3-D reconstructions of the acto-myosin interface suggest that electrostatic interactions are important in the initial phase of cross-bridge formation. Earlier biochemical studies had also given strong evidence for the ionic strength dependence of this step in the cross-bridge cycle. We have probed these interactions by altering the ionic strength (Γ/2) of the medium mainly with K⁺, imidazole⁺ and EGTA^2– to vary charge shielding. We examined the effect of ionic strength on the kinetics of rigor development at low Ca²⁺ (experimental temperature 18–22°C) in chemically skinned single fast-twitch fibres of mouse extensor digitorum longus (EDL) muscle. On average the delay before rigor onset was 10 times longer, the maximum rate of rigor tension development was 10 times slower, the steady-state rigor tension was 3 times lower and the in-phase stiffness was 2 times lower at high (230 mM) compared to low (60 mM) ionic strength. These results were modelled by calculating ATP depletion in the fibre due to diffusional loss of ATP and acto-myosin Mg.ATPase activity. The difference in delay before rigor onset at low and high ionic strength could be explained in our model by assuming a 15 times higher Mg.ATPase activity and a threefold increase in K _m in relaxing conditions at low ionic strength. Activation by Ca²⁺ induced at different time points before and during onset of rigor confirmed the calculated time course of ATP depletion. We have also investigated ionic strength effects on rigor development with the activated troponin/tropomyosin complex. ATP withdrawl at maximum activation by Ca²⁺ induced force transients which led into a ”high rigor” state. The peak forces of these force transients were very similar at low and high ionic strength. The subsequent decrease in tension was only 10% slower and steady-state ”high rigor” tension was reduced by only 27% at high compared to low ionic strength. Addition of 10 mM phosphate to lower cross-bridge attachment strongly suppressed the transient increases in force at high ionic strength and reduced the steady-state rigor tension by 17%. A qualitatively similar but smaller effect of phosphate was observed at low ionic strength where steady-state rigor force was reduced by 10%. The data presented in this study show a very strong effect of ionic strength on rigor development in relaxed fibres whereas the ionic strength dependence of rigor development after thin filament activation was much less. The data confirm the importance of electrostatic interactions in cross-bridge attachment and cross-bridge-attachment-induced activation of thin filaments. Received: 3 September 1997 / Received after revision and accepted: 12 December 1997     

Magnetic resonance elastography of the lung: technical feasibility.

Magnetic resonance elastography (MRE) is a phase-contrast technique that can spatially map shear stiffness within tissue-like materials. To date, however, MRE of the lung has been too technically challenging-primarily because of signal-to-noise ratio (SNR) limitations and phase instability. We describe an approach in which shear wave propagation is not encoded into the phase of the MR signal of a material, but rather from the signal arising from a polarized noble gas encapsulated within. To determine the feasibility of the approach, three experiments were performed. First, to establish whether shear wave propagation within lung parenchyma can be visualized with phase-contrast MR techniques, MRE was performed on excised porcine lungs inflated with room air. Second, a phantom consisting of open-cell foam filled with thermally polarized (3)He gas was imaged with MRE to determine whether shear wave propagation can be encoded by the gas. Third, preliminary evidence of the feasibility of MRE in vivo was obtained by using a longitudinal driver on the chest of a normal volunteer to generate shear waves in the lung. The results suggest that MRE in combination with hyperpolarized noble gases is potentially useful for noninvasively assessing the regional elastic properties of lung parenchyma, and merits further investigation.